Introduction
This manual provides instructions for the installation, operation, and maintenance of your Spanninga LED Bicycle Front Headlight. This headlight is designed to provide reliable illumination for your bicycle, operating within a wide voltage range of 6V to 36V DC.
Package Contents
- 1 x Spanninga LED Bicycle Front Headlight
The headlight comes with an integrated wiring harness for connection to your bicycle's power system.
Figure 1: Front view of the Spanninga LED Bicycle Front Headlight with wiring.
Setup and Installation
-
Mounting the Headlight:
Identify a suitable mounting location on the front of your bicycle, typically on the fork crown or handlebars. Use the integrated mounting bracket to securely attach the headlight. Ensure the light is positioned to illuminate the path ahead without obstructing your view or interfering with bicycle controls.
Figure 2: Side view showing the headlight's mounting bracket.
-
Electrical Connection:
The headlight operates on a DC voltage range of 6V to 36V. Connect the integrated wiring harness to your bicycle's power source (e.g., e-bike battery, dynamo). Pay close attention to polarity:
- Connect the positive (+) wire from the headlight to the positive (+) terminal of your power source.
- Connect the negative (-) wire from the headlight to the negative (-) terminal of your power source.
CAUTION: Incorrect polarity or exceeding the specified voltage range (6V-36V DC) can damage the headlight.
Figure 3: Rear view indicating DC 6-36V input and polarity markings.
-
Cable Management:
Route the wiring safely along your bicycle frame, securing it with cable ties to prevent it from snagging on moving parts or getting damaged.
Operating Instructions
Once properly installed and connected to a power source, the Spanninga LED Bicycle Front Headlight will typically activate when power is supplied to it. Depending on your bicycle's electrical system, this may be controlled by a switch on your handlebars or automatically with the bicycle's main power.
- Turning On/Off: Refer to your bicycle's specific instructions for how to control auxiliary lighting.
- Beam Adjustment: If your mounting allows, adjust the angle of the headlight to ensure optimal visibility without dazzling oncoming traffic.
Maintenance
- Cleaning: Regularly clean the lens with a soft, damp cloth to ensure maximum light output. Avoid abrasive cleaners that could scratch the lens.
- Connection Check: Periodically inspect the electrical connections for corrosion or looseness. Ensure all wiring is securely fastened and free from damage.
- Mounting Security: Check that the headlight remains securely mounted to your bicycle. Tighten any loose screws if necessary.
No user-serviceable parts are inside the headlight unit. Do not attempt to open or modify the casing, as this may void any potential warranty and could lead to damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlight does not turn on. |
|
|
| Light is dim or flickers. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Product Name | Spanninga LED Bicycle Front Headlight |
| Model Identifier (visible on lens) | TREK K316 |
| Voltage Input | DC 6V-36V |
| Position | Front |
| Material | Aluminum alloy (assumed for casing) |
| Package Dimensions (L x W x H) | 15 cm x 6 cm x 2 cm |
| Package Weight | 0.08 kg |
Note: Some product properties provided in the source data appear to be for a bicycle hub rather than the headlight. Specifications listed above are based on direct product information and visual cues.
User Tips
This section would typically include helpful advice and insights from other users. As no specific user reviews or Q&A were provided, we recommend checking online forums or product pages for community-contributed tips on optimizing your headlight's performance and longevity.
Warranty and Support
For warranty information and technical support, please refer to the retailer or manufacturer's official website where you purchased this product. Keep your proof of purchase for any warranty claims.
