ZIFON V Mount Battery User Manual

1. Introduction

The ZIFON V Mount/V Lock rechargeable battery series (ZF-BP150, ZF-BP190, ZF-BP230, ZF-BP360) provides high-capacity, fast-charging power solutions for professional camera equipment, monitors, and mobile devices. Designed with multiple safety protections and versatile interfaces, these batteries ensure reliable performance for various applications.

Figure 1: ZIFON V-Mount Battery (ZF-BP360 model) with key features.

2. Setup

2.1 Charging the Battery

1. Connect the provided battery charger to a power outlet.
2. Connect the charger's output cable to the charging port on the ZIFON V-Mount battery.
3. The LED power indicator lights on the battery will illuminate to show the charging status. All lights will be solid when fully charged.
4. Always use the specified battery charger to ensure safety and optimal performance.

Figure 2: ZIFON ZF-BP150 V-Mount battery with charger.

2.2 Mounting to Devices

The ZIFON V-Mount battery features a standard V-Lock mechanism for secure attachment to compatible cameras, camera lights, and other professional equipment.

1. Align the V-mount plate on the battery with the V-lock receiver on your device.
2. Slide the battery downwards until it clicks securely into place.
3. To remove, press the release button on the V-lock receiver and slide the battery upwards.

Figure 3: ZIFON V-Mount battery mounted on a camera light.

Video 1: Demonstration of ZIFON V-Mount battery installation and operation with a camera light.

3. Operating Instructions

3.1 Power Display

Press the power display button on the side of the battery to view the current remaining power at a glance. The LED indicators will light up to show the charge level.

Figure 4: Power display button and LED indicators.

3.2 Using as a Power Bank (USB Output)

The battery features a 5V/2A USB output interface, allowing it to function as a power bank for charging smartphones and other USB-powered devices.

1. Connect your device's USB charging cable to the USB output port on the battery.
2. The battery will automatically begin charging your device.

Figure 5: Battery charging a smartphone via USB.

3.3 D-TAP Output

The D-TAP interface provides a reliable power output for compatible professional video equipment, such as camera lights and monitors.

1. Connect a D-TAP cable from the battery's D-TAP port to your device's D-TAP input.
2. Ensure the device is compatible with the battery's voltage (14.8V).

Figure 6: D-TAP and USB output interfaces.

4. Maintenance

4.1 General Care

• Keep the battery clean and dry. Avoid exposure to moisture or extreme temperatures.
• Do not disassemble, puncture, or modify the battery.
• Avoid dropping the battery or subjecting it to strong impacts. The battery is made of fireproof PC material, resistant to falling.
• Always use the specified charger for recharging.

4.2 Storage

• For long-term storage, charge the battery to approximately 50-70% capacity.
• Store the battery in a cool, dry place away from direct sunlight and heat sources.
• Recharge the battery every 3-6 months during long-term storage to prevent deep discharge.

4.3 Safety Precautions

• Do not put the battery into fire or expose it to high temperatures (above 60°C / 140°F).
• Do not short circuit the battery terminals.
• Keep out of reach of children.

5. Troubleshooting

The ZIFON V-Mount battery is equipped with 6 circuit protection features to ensure safe operation. If you encounter issues, consider the following:

Figure 7: 6 Circuit Protection features.

• Battery not charging: Ensure the charger is properly connected and powered. Verify that the battery's charging port is clean and free of debris. If the battery is completely depleted, it may take a few minutes for the charging indicator to appear.
• Battery not powering device: Check that the battery is securely mounted to the device and that all cables (D-TAP, USB) are correctly connected. Ensure the device is compatible with the battery's voltage and power output. Check the battery's power display to confirm it has sufficient charge.
• Overload/Short Circuit Protection: If the battery suddenly stops providing power, it might have triggered its overcurrent or short circuit protection. Disconnect the battery from the device, wait a few moments, and then reconnect. If the issue persists, check the connected device for faults.
• Overheating: If the battery feels excessively hot, disconnect it immediately and allow it to cool down in a well-ventilated area. This may indicate an issue with the battery or the connected device, or it could be due to high ambient temperatures.

6. Specifications

Figure 8: ZIFON V-Mount battery dimensions.

7. User Tips

• Maximize Battery Life: For optimal battery longevity, avoid completely draining the battery regularly. Partial discharges and recharges are generally better for lithium-ion batteries.
• Check Compatibility: Always verify that your camera, light, or other equipment is compatible with 14.8V V-mount batteries before connecting.
• Monitor Power: Regularly check the LED power indicator to avoid unexpected power loss during critical shoots.
• Cool Operation: While the battery has temperature protection, operating it in excessively hot environments can reduce its efficiency and lifespan. Ensure adequate ventilation around the battery during use.

8. Warranty and Support

The ZIFON V-Mount battery comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures product quality.

For technical support, warranty claims, or any product-related inquiries, please contact your retailer or the manufacturer's customer service. Keep your purchase receipt as proof of purchase for warranty purposes.