P47 Wireless Headset User Manual

1. Introduction

Thank you for choosing the P47 Wireless Headset. This headset combines Bluetooth 5.0 technology with a foldable design, offering high-fidelity audio, powerful bass, and versatile connectivity options including TF card playback and wired AUX input. It is designed for comfortable, extended use across various devices and activities.

2. Package Contents

• P47 Wireless Headset
• USB Charging Cable
• 3.5mm Audio Cable (AUX)
• User Manual (this document)

Note: Specific package contents may vary slightly.

3. Product Overview

Familiarize yourself with the headset's components and controls.

Figure 3.1: Overview of P47 Headset Controls and Ports

Figure 3.2: Detailed view of control button functions

Control Buttons and Ports:

• Power Button: Press and hold to power on/off. Short press to play/pause music or answer/end calls.
• Volume Down / Previous Track Button (-): Short press for volume down. Long press for previous track.
• Volume Up / Next Track Button Button (+): Short press for volume up. Long press for next track.
• Mode Button (M): Short press to switch between Bluetooth, TF Card, and FM Radio modes.
• Microphone: For hands-free calls.
• TF Card Slot: Insert a MicroSD (TF) card for MP3 playback.
• 3.5mm AUX Port: For wired audio connection.
• Micro USB Charging Port: For charging the headset.

4. Setup

4.1 Charging the Headset

Before first use, fully charge the headset.

1. Connect the USB charging cable to the Micro USB charging port on the headset.
2. Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
3. The red indicator light will stay on during charging.
4. Once fully charged (approximately 2 hours), the red indicator light will turn off.

Figure 4.1: Charging Port Location

4.2 Bluetooth Pairing

Pair your headset with a Bluetooth-enabled device.

1. Ensure the headset is charged and powered off.
2. Press and hold the Power button until the blue indicator light flashes quickly, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "P47" from the list of found devices.
5. Once paired, the blue indicator light will flash slowly. You are now connected.

Figure 4.2: Bluetooth Connection Example

4.3 TF Card Installation

To play music directly from a memory card:

1. Ensure the headset is powered off.
2. Insert a MicroSD (TF) card (up to 32GB, MP3 format) into the TF card slot until it clicks into place.
3. Power on the headset. It will automatically switch to MP3 mode if a card is detected, or you can press the 'M' button to switch modes.

Figure 4.3: TF Card Slot Location

4.4 Wired Connection (AUX)

Use the headset with non-Bluetooth devices or when the battery is depleted.

1. Connect one end of the 3.5mm audio cable to the AUX port on the headset.
2. Connect the other end to the 3.5mm audio output of your device.
3. The headset will function as a wired headphone. Note that controls on the headset may not be active in wired mode, and audio will be controlled by the connected device.

Figure 4.4: 3.5mm AUX Port Location

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the Power button for approximately 3 seconds until the indicator light turns on.
• Power Off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

5.2 Mode Switching

Press the 'M' (Mode) button to cycle through available modes:

• Bluetooth Mode: Blue light flashes slowly when connected.
• MP3 Mode (TF Card): Blue light flashes slowly during playback.
• FM Radio Mode: Blue light stays on when listening, flashes when searching.

5.3 Music Playback

• Play/Pause: Short press the Power button.
• Volume Up: Short press the '+' button.
• Volume Down: Short press the '-' button.
• Next Track: Long press the '+' button.
• Previous Track: Long press the '-' button.

5.4 Phone Calls (Bluetooth Mode)

• Answer Call: Short press the Power button when an incoming call rings.
• End Call: Short press the Power button during a call.
• Reject Call: Long press the Power button when an incoming call rings.
• Redial Last Number: Double-press the Power button.

5.5 FM Radio Operation

• Switch to FM mode using the 'M' button.
• Auto-Scan: Long press the Power button to automatically scan and save available FM stations. The blue light will flash during scanning.
• Change Station: Short press the '+' or '-' buttons to switch between saved stations.

6. Specifications

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the headset. Do not use abrasive cleaners or solvents.
• Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headset regularly, even if not in use for extended periods.
• Water Resistance: This headset is not waterproof. Avoid exposure to liquids.

Figure 7.1: Foldable Design for Easy Storage

8. Troubleshooting

9. User Tips

• Comfort: Adjust the headband for a snug yet comfortable fit. The skin-friendly high-protein leather earmuffs are designed for long wearing periods.
• Portability: Utilize the foldable design to easily store and transport your headset, protecting it from damage.
• Versatility: Remember you can switch between Bluetooth, TF card, and wired AUX modes depending on your needs and device compatibility.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.