1. Introduction
Thank you for choosing the feyree EV Charger Wallbox. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your electric vehicle charging station. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Key Features
- Fantastic Design: Features a special socket design to prevent dust ingress. The 5-meter cable is durable and flexible, suitable for various environments.
- Smart and Intelligent: Equipped with an intelligent chip to monitor charging conditions, ensuring protection for both the charger and the vehicle.
- Stable and Fast Charging: 32A AC charging capacity, typically fully charging an electric car in about 7 hours. Constructed with an aluminum alloy body for enhanced durability.
- Safe and Reliable: Comprehensive protection features including IP65 waterproof rating, lightning protection, over/under voltage protection, grounding protection, overload protection, over temperature protection, short circuit protection, low temperature protection, and leakage protection. Designed for indoor/outdoor use in various climates.
- Control Box Functions:
- Leakage protection (with automatic restart recovery).
- Over voltage and under-voltage protection (with self-checking recovery).
- Over current protection.
- Overheat protection.
- Ground protection.
- Low Standby Power: Standby power consumption as low as 3W.
- High-Quality Materials: Utilizes 99.95% pure copper cable for stable current, TPU insulation for durability and flexibility, and 5µ silver-plated charging pins for better conductivity.
3. Technical Specifications
| Parameter | Value |
|---|---|
| Brand Name | feyree |
| Charger Type | Charging Station |
| Power (W) | 7KW (7.6KW for some variants) |
| Current | 32A |
| Numbers of Phase | Single Phase |
| Voltage | 220V (for Type2/GBT), 85V-264V (for Type1) |
| Input Frequency | 50Hz-60Hz |
| Cable Length | 5m |
| Cable Specification | 3G 6mm² + 1x0.5mm² |
| Operating Temperature | -30°C ~ +55°C |
| IP Rating | IP65 (some variants may be IP66 or IP55) |
| Dimensions (L x W x H) | 46cm x 40cm x 10cm (approximate) |
| Weight | 3.5KG |
| Material (Pins) | Copper alloy, silver plating |
| Material (Cable Skin) | TPU |
| Standby Power Consumption | As low as 3W |
Detailed specifications may vary slightly by connector type (Type1, Type2, GBT). Refer to the specific product variant for precise details.
Figure 1: Specifications for Type2 EV Charger
Figure 2: Specifications for Type1 EV Charger
Figure 3: Specifications for GBT EV Charger
Figure 4: Cable Structure Details
Figure 5: Product Dimensions
4. Package Contents
Upon opening the package, please verify that all items are present and undamaged:
- feyree EV Charger Wallbox Unit (with integrated charging cable)
- EV Charger Holder (may be included as a free gift)
- Instruction Manual (this document)
- Mounting Hardware (screws, anchors - typically included for wall mounting)
5. Safety Instructions
WARNING: Failure to follow these safety instructions could result in fire, electric shock, serious injury, or death.
- Ensure the charging station is installed by a qualified electrician in accordance with all local and national electrical codes.
- Do not attempt to open, disassemble, repair, or modify the charging station. Contact qualified service personnel for any repairs.
- Do not use the charging station if it is damaged, cracked, or shows any signs of malfunction.
- Keep children and pets away from the charging station during operation.
- Do not immerse the charging station or its components in water.
- Ensure the charging cable is not pinched, stepped on, or subjected to any damage.
- In case of emergency, press the reset button on the control box to immediately stop charging.
- The unit is designed with multiple protections including leakage, over/under voltage, over current, overheat, and ground protection. However, regular inspection is recommended.
6. Installation
The feyree EV Charger Wallbox is designed for easy installation, but professional installation by a certified electrician is highly recommended to ensure safety and compliance with electrical standards.
6.1 Site Selection
- Choose a suitable location for wall mounting, preferably near your electric vehicle's parking spot.
- Ensure the mounting surface is solid and can support the weight of the charger.
- The charger is rated IP65 (or IP66 for some variants) for outdoor use, offering protection against dust and water jets. It can be installed outdoors without special rain or sun protection.
- Consider the 5-meter cable length when selecting the mounting height and position.
6.2 Mounting the Charger
- Mark the drilling points on the wall using the charger unit or a mounting template (if provided).
- Drill holes and insert appropriate wall anchors.
- Securely mount the charger unit to the wall using the provided screws.
- Install the EV charger holder (if included) nearby to neatly store the charging cable when not in use.
6.3 Electrical Connection
This step must be performed by a qualified electrician.
- Ensure the main power supply to the installation area is turned OFF at the circuit breaker.
- Connect the charger's input wiring to your electrical panel according to the wiring diagram specific to your charger type (Type1, Type2, or GBT) and local electrical codes. The charger requires a single-phase 220V (or 85V-264V for Type1) supply with a 32A circuit.
- Verify all connections are secure and properly insulated.
- Restore power to the circuit.
Figure 6: Type2 EV Charger Wiring Diagram (Example)
Figure 7: Detailed Type2 EV Charger Wiring Diagram
Figure 8: Detailed Type1 EV Charger Wiring Diagram
Figure 9: Detailed GBT EV Charger Wiring Diagram
7. Operating Instructions
7.1 Starting a Charge
- Ensure the EV charger is properly installed and powered on.
- Plug the charging connector firmly into your electric vehicle's charging port.
- Press the start button on the charger unit to initiate charging. The charger operates in a button start mode.
- The intelligent chip will monitor the charging process, and the device will automatically power off when the vehicle is fully charged.
Figure 10: Easy to Use Type 2 EV Charger
Figure 11: Plug In and Charge (Type 2)
Figure 12: Plug In and Charge (Type 1)
Figure 13: Plug In and Charge (GBT)
7.2 Stopping a Charge
- To stop charging, simply unplug the connector from your vehicle.
- In case of an emergency or if you need to immediately stop charging, press the red reset button located on the side of the charger unit.
7.3 Temperature Protection
The charger features intelligent temperature protection:
- Charging will automatically stop if the internal temperature reaches 85°C.
- Charging will automatically resume when the temperature drops to 65°C.
Figure 14: Intelligent Temperature Protection
8. Maintenance
To ensure the longevity and optimal performance of your feyree EV Charger, follow these maintenance guidelines:
- Regular Cleaning: Wipe the exterior of the charger with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the charging port is free from dust and debris.
- Cable Inspection: Periodically inspect the charging cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact support.
- Connector Care: Keep the charging connector clean and dry. Avoid dropping or impacting the connector.
- Storage: When not in use, hang the charging cable on the provided holder to prevent tangling and damage.
- Environmental Durability: The charger is built with high-strength materials and designed to withstand various weather conditions, including sun and rain, greatly delaying aging time.
Figure 15: High-Strength Materials for Durability
Figure 16: Designed for Indoor/Outdoor Use
9. Troubleshooting
If you encounter issues with your feyree EV Charger, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not starting | No power, cable not fully inserted, vehicle not ready to charge. | Check power supply, ensure cable is securely connected to both charger and vehicle, verify vehicle's charging status. |
| Charging stops unexpectedly | Overheat protection triggered, over current, over/under voltage, leakage, or ground fault detected. | Check for error indicators. If due to overheat, allow unit to cool (charging resumes automatically at 65°C). For other protections, the system may self-recover or require a manual reset via the red button. If issues persist, consult an electrician. |
| Slow charging | Vehicle's charging rate limitation, power supply issue, or charger setting. | Verify vehicle's maximum charging rate. Ensure power supply is stable. (See User Tips for adjustable current). |
| Indicator lights not functioning | Power issue or internal fault. | Check power supply. If problem persists, contact customer support. |
Figure 17: Overview of Safety Protections
10. User Tips
- Adjustable Charging Current: Some users inquire about adjusting the charging current (e.g., to 3.6kW or 6kW from 7kW) to match their home's power supply (e.g., 3kW meter). While the manual doesn't detail the method, the charger is designed with intelligent features that may allow for current adjustment. Consult the manufacturer's specific instructions or technical support for guidance on adjusting the charge current if this feature is available for your model.
- Outdoor Installation: The charger's IP65/IP66 rating confirms its suitability for outdoor installation without additional rain or sun protection. Its robust construction is designed to withstand various climates.
- Emergency Stop: The red button on the side of the unit serves as an emergency stop/reset button. Press it to immediately cut power to the charging process if needed.
- Compatibility: The feyree EV Charger is compatible with a wide range of EV brands, including BYD, Tesla, Audi, Mercedes, BMW, VW, Kia, Nio, Volvo, Hyundai, Ford, MG, Toyota, Wuling, Geely, Jeep, Chery, and Aion.
Figure 18: Compatible EV Brands
Figure 19: Smart Charger Voltage and Frequency Support
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact feyree customer service through your point of purchase or the official feyree website. Please have your product model and purchase date available when contacting support.
