1. Introduction
The Eachine E017 Mini Drone is a compact and intelligent quadcopter designed for both indoor and outdoor flight. Featuring a 4-channel, 6-axis gyroscope design, it offers stable and flexible flight capabilities, including altitude hold, headless mode, one-key return, and 360-degree flips. Its user-friendly design makes it suitable for beginners and experienced pilots alike. This manual provides essential information for safe operation, setup, and maintenance of your E017 Mini Drone.
Figure 1: Eachine E017 Mini Drone and Remote Controller
2. Package Contents
Please check the package contents upon unboxing to ensure all items are present:
- 1 x E017 Mini Quadcopter
- 1 x Remote Controller
- 1/2 x 3.7V 150mAh Lipo Battery (quantity depends on purchase option)
- 4 x Spare Propellers
- 1 x Screwdriver
- 1 x USB Charging Cable
- 1 x User Manual
Video 1: Unboxing and initial setup demonstration of the Eachine E017 Mini Drone.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Eachine |
| Model | E017 Mini Quadcopter |
| Quadcopter Size | 8.3 x 8.3 x 3.2 cm |
| Quadcopter Weight | Approx. 22.3g |
| Motor | 615 motor |
| Gyroscope | 6-axis |
| Frequency | 2.4G |
| Control Channels | 4 channels |
| Drone Battery | 3.7V 150mAh Lipo (included) |
| Controller Battery | 3 x 1.5V AAA battery (not included) |
| Flight Time | Approx. 6 minutes |
| Charging Time | Approx. 50 minutes |
| Remote Control Distance | Approx. 50 meters |
| Operator Skill Level | Beginner |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Material | Plastic |
| State of Assembly | Ready-to-Go |
| Recommended Age | 14+ years |
4. Setup
4.1 Remote Controller Battery Installation
- Open the battery compartment cover on the back of the remote controller.
- Insert 3 x 1.5V AAA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
4.2 Drone Battery Installation & Charging
The drone uses a 3.7V 150mAh Lipo battery. This battery is located at the bottom of the drone and is reusable.
- Connect the drone's battery to the provided USB charging cable.
- Plug the USB charging cable into a USB power source (e.g., computer, USB wall adapter).
- The charging indicator light on the USB cable will show the charging status.
- Charging time is approximately 50 minutes for a full charge.
- Once fully charged, disconnect the battery from the charger and carefully connect it to the drone's power port.
Figure 2: USB Charging Cable in use
4.3 Pairing the Drone and Remote Controller
- Place the drone on a flat, level surface.
- Turn on the drone's power switch. The drone's indicator lights will flash.
- Turn on the remote controller's power switch.
- Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing and remain solid, indicating successful pairing.
5. Operating Instructions
5.1 Remote Control Functions
Figure 3: Remote Control Layout and Functions
- Headless Mode (Short Press) / One Key Return (Long Press): Short press to activate/deactivate headless mode. Long press to initiate one-key return.
- Rollover Mode: Press to enter rollover mode, then control the right joystick to perform a roll.
- Fine-tune: Press and hold the joystick vertically downwards, and control the right joystick to fine-tune the drone's flight.
- Speed Gear Switch: Press the joystick vertically down to switch between high, middle, and low-speed gears.
- Rotation: Activates rotation function.
- Power Switch: Turns the remote controller on/off.
- Indicator Light: Displays the remote controller's status.
5.2 Basic Flight Operations
- Take-off: After pairing, gently push the left joystick (throttle) up to take off.
- Landing: Gently pull the left joystick (throttle) down to land.
- Directional Control: Use the right joystick to control forward, backward, left, and right movement.
- Turning: Use the left joystick (left/right) to rotate the drone.
5.3 Special Features
- Altitude Hold Mode: The drone automatically recognizes and locks its altitude after taking off, allowing it to hover steadily without further operation. This feature ensures stable flight, especially for beginners.
- Headless Mode: In headless mode, the drone's orientation does not matter. The forward direction is always the direction the remote controller is facing when headless mode is activated. This simplifies control, preventing disorientation.
- One Key Return: A long press of the designated button on the remote controller will initiate the drone's return to its take-off point.
- 360° Flip & Roll: Use the remote control to achieve 360° rolls. The E017 will automatically adjust and maintain balance after performing the stunt.
Figure 4: Altitude Hold Mode and Speed Adjustment
Figure 5: Headless Mode Diagram
Figure 6: One Key Return Function
Figure 7: 360° Flip & Roll
5.4 Safety Guidelines
- Not suitable for children under 36 months due to small parts. Recommended age is 14+ years.
- Always operate the drone in open areas, away from people, animals, and obstacles.
- Ensure the drone battery is fully charged before each flight.
- Do not fly in strong winds or adverse weather conditions.
- The propeller protection design helps prevent hands from being scratched by rapidly rotating blades and protects the drone from damage when flying indoors.
- The drone is made of environment-friendly, durable plastic shells, providing good tactility, toughness, and crash resistance.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the drone and remote controller. Do not use water or chemical cleaners.
- Propeller Replacement: If a propeller is damaged, use the provided screwdriver to carefully remove it and replace it with a spare propeller. Ensure the new propeller is installed correctly.
- Battery Care: Store the Lipo battery in a cool, dry place when not in use. Do not overcharge or over-discharge the battery.
Figure 8: Strong Blades and Reusable Lithium-ion Battery
7. Troubleshooting
- Drone not responding: Ensure both the drone and remote controller are powered on and properly paired. Check remote controller batteries.
- Unstable flight: Recalibrate the drone by placing it on a flat surface and following the pairing instructions. Ensure propellers are not damaged and are installed correctly.
- Short flight time: Ensure the drone battery is fully charged. Battery performance may degrade over time; consider replacing if flight time significantly decreases.
- Drone drifts: Use the fine-tuning function on the remote controller to adjust for any drifting.
8. User Tips
- The Altitude Hold feature works very well, providing a perfect and stable hover, which is great for learning to fly.
- The drone offers stable and easy flight characteristics, making it enjoyable for beginners to pick up quickly.
- Practice in an open indoor space initially to get accustomed to the controls before attempting outdoor flights.
9. Warranty and Support
This product comes with a basic 1-month seller's warranty. If the item is found to be defective within 1 month of receipt, it will be replaced without extra charge (including shipping fee) after the defective item is received. For any issues or support, please contact the seller directly. Working hours for customer service are typically 20:00-04:00 (PST). If you encounter a weekend or holiday, the working time will be postponed to the next business day.
