yuyi 1670057-1, 1670364-1, 1563110-1, 1670865-1, 1670365-1, 1670150-1, 1563111-1, 1670866-1

Contents

Electric Wire Connector Back Cover and Bent Tail Buckle

User Manual

Brand: yuyi | Models: 1670057-1, 1670364-1, 1563110-1, 1670865-1, 1670365-1, 1670150-1, 1563111-1, 1670866-1

1. Introduction

This manual provides essential information for the proper use, installation, and maintenance of your yuyi Electric Wire Connector Back Cover and Bent Tail Buckle. These components are designed to protect electrical wire connections, ensuring durability and safety. Please read all instructions carefully before use to prevent damage to the product or personal injury.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Non-professionals should not use this product without proper guidance.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture unless the product is specifically rated for such conditions.

3. Product Overview

The yuyi Electric Wire Connector Back Covers and Bent Tail Buckles are designed to provide robust protection for electrical connections. They come in various shapes and sizes to accommodate different wiring configurations, including straight and bent tail designs for flexible cable routing.

Assortment of yuyi connector back covers and bent tail buckles
Figure 3.1: Assortment of yuyi connector back covers and bent tail buckles, showcasing various designs.
Two yuyi connector back covers, one straight and one bent, with yellow locking tabs
Figure 3.2: Close-up of two connector back covers, highlighting the straight and bent configurations and yellow locking mechanisms.
Various sizes and shapes of yuyi connector back covers
Figure 3.3: A selection of connector back covers demonstrating the range of available sizes and forms.

4. Specifications

Attribute Value
Brand Name yuyi
Model Numbers 1670057-1, 1670364-1, 1563110-1, 1670865-1, 1670365-1, 1670150-1, 1563111-1
Other Compatible Models 1670866-1
Material PA66
Color Black (various color variants for identification in SKU images)
Origin Mainland China
Package Weight 0.02 kg
Package Dimensions (L x W x H) 10 cm x 10 cm x 3 cm

Dimensional Specifications

Refer to the following figures for detailed dimensions of various connector back cover types:

Dimensions for Type A1 connector back cover: 31.4mm height, 18.6mm width, 9.8mm opening
Figure 4.1: Type A1 Connector Back Cover Dimensions (e.g., 1670365-1)
Dimensions for Type A2 connector back cover: 40.8mm height, 18.6mm width, 9.8mm opening
Figure 4.2: Type A2 Connector Back Cover Dimensions (e.g., 1670150-1)
Dimensions for Type B1 connector back cover: 33.85mm height, 23.15mm width, 16mm opening
Figure 4.3: Type B1 Connector Back Cover Dimensions (e.g., 1670364-1)
Dimensions for Type B2 connector back cover: 46.5mm height, 23mm width, 16mm opening
Figure 4.4: Type B2 Connector Back Cover Dimensions (e.g., 1670057-1)
Dimensions for Type C1 connector back cover: 40mm height, 31mm width, 16mm opening
Figure 4.5: Type C1 Connector Back Cover Dimensions (e.g., 1563110-1)
Dimensions for Type C2 connector back cover: 53.6mm height, 31mm width, 16mm opening
Figure 4.6: Type C2 Connector Back Cover Dimensions (e.g., 1563111-1)
Dimensions for Type D1 connector back cover: 43.3mm height, 43.2mm width, 16mm opening
Figure 4.7: Type D1 Connector Back Cover Dimensions (e.g., 1670865-1)
Dimensions for Type D2 connector back cover: 68.4mm height, 43.2mm width, 16mm opening
Figure 4.8: Type D2 Connector Back Cover Dimensions (e.g., 1670866-1)

5. Setup and Installation

The installation of these connector back covers and bent tail buckles requires precision to ensure a secure and protected electrical connection.

  1. Prepare Wires: Ensure all wires are properly stripped and prepared for connection to the main connector terminals.
  2. Crimp Terminals: Use professional crimping pliers to securely attach terminals to the prepared wires. This is a critical step for a reliable connection.
  3. Insert Wires into Connector: Carefully insert the crimped wires into the appropriate cavities of the main electrical connector body. Ensure they are fully seated and locked.
  4. Attach Back Cover/Buckle: Align the chosen connector back cover or bent tail buckle with the main connector body. Snap or slide it into place, ensuring all locking tabs engage securely. For models with yellow locking tabs, ensure these are fully depressed or engaged to secure the cover.
  5. Verify Connection: Gently tug on the wires to confirm they are firmly held by the connector and that the back cover is fully closed and locked.

For detailed instructions, please refer to the official user manual PDF: View User Manual (PDF)

6. Operating Instructions

These products are passive components designed to protect electrical connections. Once properly installed, they require no active operation. Their function is to provide mechanical protection, strain relief, and environmental sealing for the underlying electrical connections.

Ensure that the connector assembly is not subjected to excessive force, sharp bends (beyond the design of bent tail buckles), or temperatures outside its material specifications.

7. Maintenance

Minimal maintenance is required for these connector components. Regular inspection is recommended, especially in environments subject to vibration, extreme temperatures, or chemical exposure.

  • Visual Inspection: Periodically check the back covers and buckles for any signs of cracking, discoloration, or damage.
  • Cleanliness: Keep the connectors free from dirt, dust, and debris. Use a dry, lint-free cloth for cleaning. Avoid harsh chemicals that may degrade the PA66 material.
  • Security Check: Ensure the back covers remain securely attached to the main connector body. Re-seat or replace if any looseness is detected.
  • Environmental Protection: If the application environment changes, ensure the chosen connector type still provides adequate protection against moisture, dust, or other contaminants.

8. Troubleshooting

Most issues related to these components stem from improper installation or physical damage.

Problem Possible Cause Solution
Back cover does not close securely Misalignment, obstruction, or incorrect part for connector Re-align and try again. Check for debris. Ensure correct model is used for the connector.
Wires pull out easily from connector Improper crimping of terminals, or terminals not fully seated Re-crimp terminals using professional tools. Ensure terminals are fully inserted and locked into the main connector.
Visible damage to back cover (cracks, breaks) Physical impact, excessive force during installation, or material degradation Replace the damaged back cover immediately to maintain protection.

9. User Tips

  • Always double-check the model numbers and dimensions to ensure compatibility with your existing connectors before installation.
  • When working with multiple wires, consider using color-coded wires or marking them to simplify the connection process and prevent errors.
  • For applications requiring high vibration resistance, consider adding additional strain relief measures beyond the buckle itself.

10. Compliance Information

This product complies with relevant European Union directives and regulations, as indicated by the CE marking.

CE Mark

CE Mark (Example image, actual mark may vary)

11. Manufacturer & Support

Manufacturer Information

Manufacturer: Yueqing ChenYi Electric Co., Ltd

Address: 2nd Floor, Building 3, No. 12 Yongxing 1st Road, Chengdong Industrial Functional Zone, Chengdong Street, Yueqing City, Zhejiang Province, China

Phone: +86-15869652718

EU Authorized Representative

Representative: EUREPSTAR GmbH

Address: Schlüterstr. 3, 85057 Ingolstadt, Germany

Phone: +49-84188697744

Email: eurep@eurep-gmbh.de

Warranty & Technical Support

For warranty claims, technical assistance, or further inquiries, please contact your point of purchase or the manufacturer directly using the contact information provided above. Please have your product model number and purchase details ready when contacting support.

© 2024 yuyi. All rights reserved. Information in this manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.