PowMr POW-HVM H Series

Contents

PowMr Hybrid Solar Inverter Instruction Manual

Models: POW-HVM2H-12V-N, POW-HVM3.0KW-24V, POW-HVM3.2H-24V-N

1. Introduction

This PowMr Hybrid Solar Inverter is a multi-function inverter/charger designed to provide uninterruptible power support. It integrates the functions of an inverter, a solar charger, and a battery charger into a portable unit. The comprehensive LCD display allows for user-configurable settings, including battery charging current, AC/solar charger priority, and acceptable input voltage ranges, adapting to various application needs.

The inverter offers a pure sine wave output and bypass output, with a maximum power capacity of 3000W (for 3.0KW/3.2KW models) or 1600W (for 2.0KW model). It has a rated output voltage of 230V and supports a maximum charging current of 80A for both solar and AC power charging. It is compatible with various battery systems, including lithium-ion and lead-acid batteries, and features a wide MPPT voltage range of 30-400VDC (or 90-430VDC depending on model).

Video: Unboxing and overview of the PowMr Hybrid Solar Inverter, highlighting key features and package contents.

2. Features

  • Pure sine wave inverter output.
  • Configurable input voltage range for home appliances and personal computers via LCD setting.
  • Configurable battery charging current based on applications via LCD setting.
  • Configurable AC/Solar Charger priority via LCD setting.
  • Compatible with mains voltage or generator power.
  • Auto restart function when AC power is restored.
  • Overload, over temperature, and short circuit protection.
  • Smart battery charger design for optimized battery performance.
  • Cold start function.
  • WIFI/GPRS monitoring capability (optional module required).
  • Can connect to various battery types, including lithium batteries.

3. Package Contents

Upon opening the package, you should find the following items:

  • PowMr Hybrid Solar Inverter unit
  • User Manual

Please inspect all components for any damage during transit. If any items are missing or damaged, contact your vendor immediately.

PowMr Hybrid Solar Inverter main product image

Figure 1: PowMr Hybrid Solar Inverter

4. Specifications

The following table details the specifications for the PowMr Hybrid Solar Inverter models:

SpecificationPOW-HVM2H-12V-NPOW-HVM3.0KW-24VPOW-HVM3.2H-24V-N
Rated Output Power2000VA/1600W3200VA/3000W3200VA/3000W
Output Voltage WaveformPure Sine Wave
Output Voltage Regulation230Vac±5%
AC Charging Current (Max)60 Amp
Max. PV Array Power2000W3000W3000W
PV Array MPPT Voltage Range30~400Vdc90~430Vdc30~400Vdc
Max. PV Array Open Circuit Voltage400Vdc450Vdc400Vdc
Max Charging Current (AC+Solar)80Amp
Safety CertificationCE
Operating Temperature Range-10°C to 50°C
Humidity5% to 95% Relative Humidity (Non-condensing)
Nominal Input Voltage230Vac
Output Frequency50Hz/ 60Hz (Auto-detection)
Size (L x W x H)348 x 270 x 95 mm
Weight5.8KG
Is Smart DeviceYes (Supports WIFI module)
Battery Type CompatibilityLifepo4, Lithium, Flooded, Gel, Lead-acid Batteries
Detailed specifications table for PowMr Hybrid Solar Inverter

Figure 2: Detailed Specifications Table

5. Setup and Installation

The PowMr Hybrid Solar Inverter is designed for integration into a comprehensive hybrid power system. Proper installation is crucial for safe and efficient operation.

5.1 System Overview

The inverter acts as the central component, managing power flow between solar panels, utility grid, generator, batteries, and connected home appliances.

Hybrid Power System diagram showing connections for solar, utility, generator, battery, and home appliances

Figure 3: Hybrid Power System Diagram

5.2 Connection Points

The inverter features clearly labeled terminals for all connections:

  • AC IN: Connects to the utility grid or a generator.
  • AC OUT: Connects to your home appliances/load.
  • BATTERY (+/-): Connects to your 12V or 24V battery bank.
  • PV IN (+/-): Connects to your solar panel array.
  • COMM Port: For optional WiFi module connection.
  • Power Switch: To turn the inverter ON/OFF.
Close-up of the inverter's back panel, showing AC IN/OUT terminals, battery terminals, PV IN terminals, and cooling fans

Figure 4: Inverter Back Panel Connections

Close-up of the inverter's side with the power switch

Figure 5: Inverter Power Switch

Close-up of the inverter's side with the COMM port

Figure 6: Inverter COMM Port

WARNING: All electrical installations should be performed by qualified personnel in accordance with local electrical codes and regulations. Ensure all power sources are disconnected before making any connections.

6. Operating Modes

The inverter supports various charging and output modes to optimize power usage based on availability and user preference.

6.1 Charging Modes

  • Solar Charging: Prioritizes charging batteries from solar panels.
  • Utility Charge (Solar as backup power): Uses utility power to charge batteries, with solar as a backup.
  • Solar Priority (Utility as backup power): Prioritizes solar for charging, using utility only when solar is insufficient.
  • Solar+Utility Charging: Charges batteries simultaneously from both solar and utility sources.

6.2 Output Modes

  • PV Priority: Prioritizes power from solar panels to supply the load.
  • Utility Priority: Prioritizes power from the utility grid to supply the load.
  • Inverter Priority: Prioritizes power from the inverter (drawing from batteries) to supply the load.
Diagram illustrating four safe charging modes and three output modes

Figure 7: Charging and Output Modes

7. WiFi Monitoring (Optional)

The inverter supports an optional WiFi module for remote monitoring and parameter adjustment via a smartphone application. This allows users to view system performance in real-time without needing to check the inverter's LCD display.

Diagram showing WiFi monitoring capabilities with a smartphone app and optional WiFi module

Figure 8: WiFi Monitoring Setup

8. Battery Compatibility

This inverter is designed to be compatible with a wide range of battery types, ensuring flexibility for various energy storage solutions.

  • LiFePO4 Batteries
  • Lithium Batteries
  • Flooded Batteries
  • AGM Batteries
  • Sealed Lead Acid Batteries
  • Gel Batteries
Icons representing compatible battery types: LiFePO4, AGM, Lithium, Flooded, Sealed Lead Acid, Gel

Figure 9: Compatible Battery Types

9. Troubleshooting

This section provides guidance on common issues you might encounter with your PowMr Hybrid Solar Inverter.

9.1 Overload Protection

Symptom: The inverter goes into protection mode or makes beeping sounds when a high-power appliance (e.g., refrigerator) is connected or starts up.

Possible Cause: The connected load exceeds the inverter's rated output power or surge capacity.

Solution:

  • Reduce the total load connected to the inverter.
  • Ensure that the starting current of inductive loads (like refrigerators or motors) does not exceed the inverter's surge capacity.
  • Consider using a higher-capacity inverter if your typical load requirements are consistently high.

9.2 Solar Panel Charging Malfunction

Symptom: The inverter is not charging batteries from solar panels, even when solar panels are connected and exposed to sunlight.

Possible Cause:

  • Incorrect solar panel connections (polarity, loose wires).
  • MPPT settings are not configured correctly for your solar array.
  • Solar panel array voltage is outside the inverter's MPPT voltage range (30-400Vdc or 90-430Vdc, depending on model).
  • Damaged solar panels or wiring.

Solution:

  • Verify all solar panel connections for correct polarity and secure fastening.
  • Check the inverter's LCD display for MPPT settings and ensure they match your solar panel specifications.
  • Measure the open-circuit voltage (Voc) and short-circuit current (Isc) of your solar array to confirm it falls within the inverter's operational limits.
  • Inspect solar panels and wiring for visible damage.

9.3 Inverter Not Functioning Without Batteries

Symptom: The inverter does not operate when solar panels are connected but no batteries are present.

Possible Cause: This is a hybrid inverter designed to work with a battery bank for stable operation and energy storage. Direct solar-to-load operation without batteries may not be supported or may have limitations depending on the specific model and firmware.

Solution: Ensure a compatible battery bank (12V or 24V) is properly connected to the inverter. Refer to the specifications for recommended battery types and configurations.

10. User Tips

  • Voltage Mixing: The inverter supports voltage mixing from the electrical grid, allowing for flexible power management. Utilize the AC/Solar Charger priority settings to configure this feature according to your needs.
  • Load Capacity: The inverter models have rated output powers of 1600W (2KW 12V) and 3000W (3.0KW/3.2KW 24V). A 600W laser printer, for example, should operate well within these limits. Always ensure your total connected load does not exceed the inverter's continuous output power.
  • Battery Choice: This inverter is compatible with LiFePO4 batteries, which are known for their long cycle life and safety. Ensure your battery type is correctly selected in the inverter's settings for optimal charging and discharge performance.

11. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your inverter.

  • Cleaning: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow and cooling. Use a soft, dry cloth for cleaning the exterior. Do not use liquid cleaners.
  • Connections: Periodically check all electrical connections (AC IN/OUT, Battery, PV IN) for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
  • Environment: Ensure the inverter is installed in a dry, well-ventilated area, away from direct sunlight, moisture, and flammable materials. Maintain operating temperatures within the specified range (-10°C to 50°C).
  • Firmware Updates: If available, check the manufacturer's website for any firmware updates that may improve performance or add new features.

12. Warranty and Support

This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

Certificate of Conformity for PowMr Hybrid Solar Inverter

Figure 10: Certificate of Conformity

For specific warranty terms, technical support, or service inquiries, please contact your original point of purchase or the PowMr customer service directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.