1. Introduction
The ES32 PIR Sensor Stair Light Controller is a versatile device designed to manage lighting effects for staircases. It supports both single-color constant voltage LED strips and digital RGB pixel LED strips, offering a range of customizable lighting modes and features. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and safety.
2. Package Contents
Please check the package for the following items:
- 1 x ES32 Stair Light Controller
- 1 x Daylight sensor (30cm)
- 2 x PIR sensors
- 2 x PIR sensor extension wires (5m)
- 1 x User manual (This document)
Optional components, if purchased separately:
- COB LED Strip (e.g., 5M 12V COB LED Strip)
- Power Supply (e.g., 200W/300W/400W)

3. Key Features
- Daylight Sensor Integration: Prevents lights from turning on when ambient light is sufficient.
- Multi-Channel Output: 32 channels for constant voltage single-color LED strips (Max 1A/channel).
- Digital RGB Pixel Strip Support: 2 groups of SPI (TTL) signal output compatible with 27 types of IC digital RGB LED strips (Max 2x960 pixels). IC type and R/G/B order are configurable.
- User-Friendly Interface: OLED display and 3 buttons for easy operation and parameter adjustment.
- Multiple Lighting Modes: Four selectable work light modes with adjustable speed and brightness (1-8 grades).
- Scalability: Two controllers can be cascaded to support more steps/pixels.
- Flexible Input: Push switches can be used as inductive signal inputs.
- Self-Testing Function: Includes a fast self-checking function.
- Channel Management: Ability to disable damaged LED channels.
- Power Source: DC 5-24V.
- Material: Metal + ABS.
- Max. Load Power: 768W.
- Remote Distance: 3m.
4. Technical Specifications
| Category | Parameter | Value |
|---|---|---|
| Input and Output | Input Voltage | 5-24VDC |
| Output Voltage | 32 x (5-24)VDC | |
| Output Current | 32CH, 1A/CH | |
| Output Power | 32 x (5-24)W | |
| Output Type | Constant voltage + SPI(TTL) | |
| Environment | Operation Temperature | Ta: -30℃ ~ +55°C |
| Case Temperature (Max.) | Tc: +85°C | |
| IP Rating | IP20 | |
| Sensor Data | Sensitive Field | <3m |
| Sensitivity Angle | 120° | |
| Safety and EMC | EMC Standard | ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4 |
| Safety Standard | EN 62368-1:2020+A11:2020 | |
| Certification | CE, EMC, LVD | |
| Warranty and Protection | Warranty | 5 years |
| Protection | Reverse polarity |
5. Setup and Wiring
Before installation, ensure the power supply is disconnected. Connect all components according to the wiring diagrams provided. The controller supports both single-color constant voltage LED strips and digital RGB pixel LED strips.
5.1. Wiring Diagram

The diagram illustrates the connection points for the controller, power supply, PIR sensors (Up and Down direction), daylight sensor, and LED strips. Note that the RGB pixel strip can also use a separate power supply if needed.

This diagram shows how to connect 16 single color LED strips to the upper output terminals (01-16) and another 16 to the lower output terminals (17-32). The SPI signal for RGB pixel strips is connected to the CLK, DA, and GND terminals on the left side. The power supply (5-24VDC) connects to the controller's input terminals.
5.2. PIR Sensor Installation

Size of Detector: Refer to the diagram for dimensions (e.g., 27mm diameter, 19.2mm height, 14mm mounting hole).
PIR Sensor Detection Pattern:
- Wall mounting pattern: Detection range of 3m with a 120° angle.
- Ceiling mounting pattern: Detection range of 3-4m with a 120° angle.
Notice for Installation of PIR Sensor:
- If the sensor is exposed to direct sunlight, interference signals may be introduced.
- The sensor should be installed in a dry environment and kept away from windows, air conditioners, and fans.
- Ensure the sensor is away from heat sources (e.g., countertops, kitchen appliances, heating, refrigerators).
- Recommended wall-mounted installation height is 1-1.5 meters. Ceiling mounting height should not exceed 3 meters.
- There should be no obstructions (screen, furniture, large bonsai) within the range of detection.
6. Operating Modes and Settings
The ES32 controller offers four distinct work light modes, each with adjustable parameters. These modes can be selected and configured via the OLED display and buttons.

6.1. System Parameters Setting
To enter the system parameters setting state, long press the 'M' key for 2 seconds. Once in this state, you can switch between different parameters by short pressing the 'M' key, and adjust values using the '<' or '>' keys. To exit, long press 'M' again or wait 15 seconds.
6.1.1. Work Modes:
- White_Step: For multiple constant voltage LED strip lights.
- Color_Flow: For 1 or 2 straight-line digital pixel LED strip lights.
- Color_Step: For multiple Z-shape digital pixel LED strip lights.
- Step+Flow: Combines multiple constant voltage LED strips with 1 or 2 straight-line digital pixel LED strip lights.
6.1.2. Light Off Mode ('Off'):
- Delay sync: All lights turn off simultaneously after a set delay.
- One by one: Lights turn off sequentially from head to tail after a set delay.
6.1.3. Daylight Sensor Threshold ('LuxSet'):
Set the ambient light threshold (e.g., 10, 30, 50, 100, 150, 200lux, OFF). If the current detected LUX value (indicated by '*' on the display) is below the threshold, the PIR sensor will activate the lights. If sufficient ambient light is present, the PIR sensor will not turn on the light.
6.1.4. Chip Type ('Chip') and RGB Order ('DefRGB'):
For digital pixel LED strips, select the appropriate IC type from the compatible list and define the RGB hex value for user-defined colors. These parameters are only valid for work modes using SPI signals.
| No. | IC Type | Output Signal |
|---|---|---|
| 1 | TM1809, TM1804, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811, WS2812 | DATA |
| 2 | TM1829 | DATA |
| 3 | TM1914A | DATA |
| 4 | GW6205 | DATA |
| 5 | GS8206, GS8208 | DATA |
| 6 | LPD6803, LPD1101, D705, UCS6909, UCS6912 | DATA, CLK |
| 7 | LPD8803, LPD8806 | DATA, CLK |
| 8 | WS2801, WS2803 | DATA, CLK |
| 9 | P9813 | DATA, CLK |
| 10 | SK9822 | DATA, CLK |
6.2. Work Mode Details
Each work mode has specific parameters for customization:
- White Step Mode:
- Step: Total step number (008-032).
- Bri: Brightness grade (1-8, 8 is brightest).
- Mode: White mode number (01-03).
- Speed: Speed grade (1-8, 8 is fastest).
- Color Flow Mode:
- Dot: Pixel dot number (032-960).
- Bri: Brightness grade (1-8, 8 is brightest).
- Mode: Color mode number (01-12).
- Speed: Speed grade (1-8, 8 is fastest).
- Color Step Mode:
- Step: Total step number (008-160).
- Dot: Pixel dot number of each step (002-120). The Step number x Dot number must be < 960.
- Mode: Color mode number (01-12).
- Speed: Speed grade (1-8, 8 is fastest).
- White Step + Color Flow Mode:
- Combines constant voltage LED strips with straight-line digital pixel LED strips.
- Parameters for Step, Dot, Bri, Mode, and Speed are available, similar to the individual modes.
Color Mode List (for Color Flow, Color Step, White Step + Color Flow modes):
| No. | Name |
|---|---|
| 01 | Red |
| 02 | Orange |
| 03 | Yellow |
| 04 | Green |
| 05 | Cyan |
| 06 | Blue |
| 07 | Purple |
| 08 | White |
| 09 | Color queue (7 color + White) |
| 10 | Color chase (7 color + White) |
| 11 | Color fade (6 color flow) |
| 12 | Rxxx Gxxx Bxxx (User define) |
7. Advanced Functions
7.1. LED Channel Output Disable Setup
If any of the 32 constant voltage LED output channels are damaged, you can disable them. Long press the 'M', '<', and '>' keys simultaneously for 2 seconds to enter the LED disable setting interface. Here, you can change the status of each channel (e.g., '04') from '1' (enable) to '0' (disable). This allows the controller to ignore the damaged channel.
7.2. Push Switch Control

Two push switches can be connected as up/down sensing signal inputs. Pressing a push switch will override the daylight sensor threshold setting. If the push switch function is set as 'button input', a push operation will turn on all lights, and they will turn off synchronously after a delay (delay time depends on speed grade).
7.3. Cascade Connection of Two Stair Light Controllers
Two stair light controllers can be connected in cascade via the UP/DW interface to increase the number of steps and pixel dots. The upstair controller connects to the Down direction PIR sensor and daylight sensor, while the downstair controller connects to the Up direction PIR sensor and daylight sensor. When the push switch function is set as 'cascade input/output', the push operation will start the induction light control process. When the induction light control process is over, the lights will turn off after 10 seconds automatically. For speed grades 1-8 (cascade input), the turn-off delay times are 90/80/70/60/50/40/30/20 seconds respectively.
8. Maintenance
- Keep the controller and sensors clean and free from dust.
- Ensure all connections are secure and free from corrosion.
- Avoid exposing the device to extreme temperatures or moisture.
- Do not attempt to repair the device yourself; contact qualified personnel for service.
9. Troubleshooting
- Lights not turning on: Check power supply, sensor connections, and daylight sensor threshold settings. Ensure the PIR sensor is not exposed to direct sunlight or heat sources.
- Incorrect lighting effects: Verify the selected work mode, brightness, speed, and pixel dot number settings. For digital pixel strips, confirm the correct IC type and RGB order.
- Lights not turning off: Check the 'Off' mode setting (Delay sync or One by one) and ensure the delay time is appropriate.
- Damaged LED channel: Use the LED channel output disable setup to bypass the faulty channel.
- Intermittent operation: Ensure all wiring is secure and there are no loose connections. Check for any obstructions near the PIR sensors.
10. User Tips
- Brightness Adjustment: The brightness of constant voltage LED strips can only be set in the CV-Step interface. The brightness of pixel strips can only be set in the SD-Line interface.
- Motion Sensor Sensitivity: While there isn't a direct sensitivity adjustment for the motion sensor, proper placement and avoiding interference sources (direct sunlight, heat, windows, fans) are crucial for optimal performance.
- Power Loss Memory: The controller is designed to retain its programming after power is lost, ensuring your settings are preserved.
- Step Number and Pixel Dots: When configuring Color Step mode, ensure that the total step number multiplied by the pixel dot number per step does not exceed 960.
11. Warranty and Support
This product comes with a 5-year warranty. For technical support or warranty claims, please refer to the seller's contact information or the official product page. Ensure you retain your proof of purchase.
For additional information and detailed diagrams, you may consult the official user manual PDF: User Manual (PDF).