1. Important Safety Instructions
WARNING:
This product does not feature an explosion-proof structure and must not be used in flammable environments, such as those containing flammable gases, liquids, or explosives.
SAFETY INFORMATION:
- Please use this product in accordance with the instructions in this manual.
- Do not disassemble this product by yourself.
- Pay attention to the rated voltage for use.
2. Product Description
The EARU D52-2066 is an instrument and equipment used to measure, record, display, and analyze parameters related to electric energy. It is widely applied in various stages of the power system, including power generation, transmission, distribution, and consumption.

3. Specifications
| Parameter | Value/Range |
|---|---|
| Accuracy | 1% ± 2 words |
| AC Voltage | AC 40.0-300.0V or AC 250.0-450.0V (Select one type) |
| AC Current | AC 0-100.0A (Resolution: 0.01A) |
| Frequency | 45.0Hz-65.0Hz |
| Power Factor | 0.00-1.00PF |
| Electric Power | 0-450000W (Resolution: 0.1W for 0-9999.9W, 1W otherwise) |
| Electric Energy | 0-99999kWh (Resolution: 0.01kWh for 0-999.99kWh, 0.1kWh for 1000.0-9999.9kWh, 1kWh for >9999.9kWh) |
| Measurement Speed | 2 times per second |
| Dimensions | 54mm x 80mm x 64mm |
| Installation | Din-Rail |


4. Installation & Wiring
The EARU D52-2066 meter is designed for Din-Rail installation.

4.1. Wiring for Built-in Current Transformer (CT)
- Connect the measure voltage to terminals 1 and 2 of the meter.
- For meters with a built-in current transformer, pass the wire through the hole in the meter. The direction of the wire through the hole can be chosen arbitrarily.



4.2. Wiring for External Current Transformer (CT)
- Connect the measure voltage to terminals 1 and 2 of the meter.
- Pass the main load wire through the external current transformer.
- Connect the two wires of the secondary transformer (external CT) to terminals 3 and 4 on the meter.


5. Operation
- Once powered on, the meter will display the measured parameters (Watt, kWh, Voltage, Frequency, Amperage, Power Factor).
- To reset the electric energy (kWh) accumulation: Press and hold the "RESET" button (labeled "SAM CK" in some diagrams) for 5 seconds. The electric energy value will reset to zero upon release, and accumulation will restart.
- The meter saves the accumulated electric energy value when powered off and resumes accumulating data when powered on again.
6. Maintenance
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the meter to extreme temperatures, humidity, or direct sunlight.
- Ensure all connections are secure and free from corrosion. Periodically check wiring for any signs of wear or damage.
- Do not use abrasive cleaners or solvents on the device.
7. Troubleshooting
- No Display: Check power connections to terminals 1 and 2. Ensure the input voltage is within the specified range (AC 40.0-300.0V or AC 250.0-450.0V, depending on model).
- Incorrect Current/Power Readings: Verify that the load wire is correctly passed through the CT (either built-in or external) and that the external CT is properly connected to terminals 3 and 4. Ensure the CT direction is consistent.
- Energy (kWh) Not Accumulating: Check if the meter is powered on. If the issue persists after a power cycle, try resetting the energy accumulation by holding the RESET button for 5 seconds.
- Inaccurate Readings: Ensure the meter is installed in a stable environment, free from strong electromagnetic interference. Verify that the correct voltage range model was selected for your application.
8. User Tips
Based on general user feedback for similar devices:
- For accurate readings, ensure stable power input and proper grounding.
- When installing, double-check all wiring connections to prevent short circuits or damage to the meter.
- Consider the specific voltage range (AC 40-300V or AC 250-450V) required for your application before purchasing to ensure compatibility.
9. Warranty & Support
For warranty information and technical support, please refer to the official EARU website or contact your point of purchase. Keep your purchase receipt as proof of purchase.
10. Additional Resources
A detailed user manual in PDF format is available for download. This document provides further in-depth information regarding the meter's features and advanced usage scenarios.
You can access the PDF manual here: EARU D52-2066 User Manual (PDF)