Lifud LF-GIR024YS

Contents

Lifud LF-GIR024YS Series No Flicker LED Driver User Manual

Model: LF-GIR024YS

Brand: Lifud

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Lifud LF-GIR024YS Series No Flicker LED Driver. Please read these instructions carefully before use and retain them for future reference. This LED driver is designed to provide a stable, flicker-free power supply for LED modules, ensuring optimal performance and eye comfort.

Lifud LF-GIR024YS LED Driver and its internal components
Figure 1: Lifud LF-GIR024YS LED Driver and internal board.
Lifud LF-GIR024YS LED Driver with input and output labels
Figure 2: Lifud LF-GIR024YS LED Driver with clearly marked input and output.
Video 1: Overview of the Lifud LF-GIR024YS LED Driver.

2. Important Safety Instructions

WARNING: Risk of electric shock. Always disconnect power before installation or servicing.

  • Power Disconnection: Always ensure the power supply is cut off before installing, removing, or performing any maintenance on the LED driver to avoid electric shock. Confirm the switch is in the OFF position before making any connections.
  • Product Inspection: Before installation, carefully inspect the product for any mechanical damage, deformation, broken lamp cover, or damage to the LED driver and LED beads. Do not install damaged components.
  • Professional Installation: Installation should ideally be performed by a certified electrician. Do not attempt installation on your own unless you are qualified and strictly follow this instruction manual.
  • Correct Wiring: When connecting, it is crucial to correctly differentiate and connect the live wire (L), neutral wire (N), and ground wire (PE) for both the product and the power supply. Incorrect wiring can cause permanent damage to the luminaire and pose a safety hazard.
  • Voltage Verification: Before energizing the system, ensure that the lamp's operating voltage is correct and matches the driver's specifications. Applying the wrong voltage will cause permanent damage to the LED driver and connected modules.
  • Static Electricity Precautions: LEDs are sensitive to static electricity. Take anti-static measures (e.g., wearing an anti-static wrist strap and anti-static shoes) when handling LED components.
  • Avoid Heat Sources: LED bulbs and drivers should not be exposed to excessive heat, as this can significantly reduce their service life. Ensure adequate ventilation.
  • Avoid Frequent Switching: Lamp cups that utilize high-voltage power supplies are not designed for frequent on/off operation, as this will shorten their lifespan.

This product conforms to CE, UKCA, FC, and RoHS standards.

3. Installation Guide

Follow these steps for proper installation of the Lifud LF-GIR024YS LED Driver:

  1. Prepare for Installation: Ensure the main power supply is turned off at the circuit breaker.
  2. Access Terminals: The LF-GIR024YS features a screw-free end cap design. To access the wiring terminals, gently remove the blue end caps. This design helps save labor costs during installation.
  3. Removing the end cap of the LED driver
    Figure 3: Illustration of removing the end cap to access terminals.
    LED driver with cover removed showing AC input and DC output terminals
    Figure 4: LED driver with cover removed, revealing AC input and DC output terminals.
  4. Connect AC Input: Connect the AC input wires (Live 'L' and Neutral 'N') from your mains power supply to the corresponding 'AC-L' and 'AC-N' terminals on the driver. Ensure a secure connection.
  5. Close-up of AC input terminals (AC-L, AC-N)
    Figure 5: Close-up view of the AC input terminals.
  6. Connect DC Output: Connect the DC output wires from the LED modules to the 'LED+' and 'LED-' terminals on the driver. Observe correct polarity (positive to LED+, negative to LED-).
  7. Close-up of DC output terminals (LED+, LED-)
    Figure 6: Close-up view of the DC output terminals.
  8. Secure Wiring: Double-check all connections to ensure they are tight and correctly wired according to the labels.
  9. Replace End Caps: Once wiring is complete, securely reattach the blue end caps to protect the terminals.
  10. Power On: Restore power to the circuit. The LED modules should now illuminate.

4. Operating Instructions

The Lifud LF-GIR024YS LED Driver is designed for straightforward operation. Once correctly installed and powered, it will automatically provide a constant current output to the connected LED modules.

  • Automatic Operation: The driver operates automatically when power is supplied. No user intervention is required for its basic function.
  • Flicker-Free Performance: This driver is engineered to provide a 'No Flicker' output, ensuring stable illumination and reducing eye strain.
  • Compatibility: Ensure your LED modules are compatible with the driver's output voltage (DC25-42V) and current (400mA, 500mA, 550mA, or 600mA, depending on the specific model variant).

5. Maintenance

The Lifud LF-GIR024YS LED Driver requires minimal maintenance. Adhering to these guidelines will help ensure its longevity and reliable performance:

  • Cleaning: Keep the driver clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.
  • Ventilation: Ensure the driver is installed in an area with adequate ventilation to prevent overheating. Do not cover the driver or obstruct its airflow.
  • Regular Inspection: Periodically inspect the wiring connections for any signs of loosening or damage. Address any issues promptly after disconnecting power.
  • Environmental Conditions: Operate the driver within the specified environmental conditions (temperature and humidity) to prevent premature failure.

6. Troubleshooting

If you encounter issues with your LED driver, refer to the following common problems and solutions:

ProblemPossible CauseSolution
LEDs do not light upNo power supply
Incorrect wiring
Faulty LED module
Incorrect voltage/current match
Check power connection and circuit breaker.
Verify AC input and DC output wiring (L/N, LED+/LED-).
Test LED module with a known good driver.
Ensure LED module voltage/current matches driver specifications.
LEDs flickerLoose connection
Incompatible dimmer (if applicable)
Driver fault
Check all wiring connections.
Ensure any dimmer used is compatible with LED drivers.
If flickering persists, the driver may be faulty and require replacement.
LEDs are dim or inconsistentUnder-powering
Overheating
Faulty LED module
Verify driver output current matches LED module requirements.
Ensure adequate ventilation around the driver and LEDs.
Test LED module.
Driver is hot to touchOverload
Poor ventilation
High ambient temperature
Ensure total LED load does not exceed driver's maximum output power.
Improve airflow around the driver.
Relocate driver to a cooler environment if possible.

If the problem persists after attempting these solutions, please contact customer support.

7. Technical Specifications

The Lifud LF-GIR024YS series LED drivers offer robust performance for various LED lighting applications.

ParameterSpecification
Model NumberLF-GIR024YS
Input VoltageAC220-240V
Operating Voltage Limit198-264Vac
Input Frequency47Hz-63Hz
Output VoltageDC25-42V
Output Current Options400mA, 500mA, 550mA, 600mA (model dependent)
Output Power16.8W - 23.4W (model dependent)
Power Factor (PF)≥0.5
Power Efficiency88%
FeaturesNo Flicker, Flicker Free, Isolation Constant Current, Screw-free end cap
THD≤20%
Flicker IndexConforms to IEEE 1789
CIE SVM≤0.4
IEC-Pst≤1
Current Tolerance±5%
Temperature Drift±10%
Start-up Time<0.5s
Input Current0.25A Max
Inrush Current≤35A@100uS@220Vac
Leakage Current≤0.7mA
Standby Power Consumption≤0.5W
ProtectionOpen Circuit Protection (<63V), Short Circuit Protection (Hiccup mode, auto-recovery)
CertificationCCC, CE, ROHS, CB, RCM, TUV
MaterialPlastic ABS
Weight0.06kg
Dimensions (L*W*H)96*36*23.5 mm
Operating Temperature-30°C to +50°C
Operating Humidity20-90% RH (no condensation)
Storage Temperature/Humidity-40°C to +80°C (six months under class I environment) / 10-90% RH (no condensation)
Atmospheric Pressure86kPa-106kPa
Table of Electrical Characteristics for Lifud LF-GIR024YS LED Drivers
Figure 7: Detailed Electrical Characteristics for LF-GIR024YSxxxxH models.

8. User Tips

  • Verify Compatibility: Always double-check the output voltage and current requirements of your LED modules against the driver's specifications before purchase and installation. For example, this driver operates at DC25-42V, so it would not be suitable for LED modules requiring 50-70V.
  • Reliable Performance: Users have reported that this driver works perfectly and provides fast, reliable performance. Proper installation according to this manual will ensure optimal results.

9. Warranty and Support

The Lifud LF-GIR024YS LED Driver comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship under normal use.

For technical assistance, troubleshooting, or warranty claims, please contact our customer support. If you are unsure how to use the product or have any questions, our team is ready to assist you.

Service Hotline: +86 755 8373 9299

Website: www.lifud.com

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.