1. Introduction
The S8602 is a sophisticated 3-in-1 digital radiation detector designed to provide comprehensive environmental monitoring. This device accurately measures electric field radiation, magnetic field radiation, and ambient temperature. Given the prevalence of electromagnetic radiation from everyday electronics such as mobile phones, televisions, computers, and refrigerators, understanding your exposure levels is crucial. The S8602 helps you assess the electromagnetic environment in your home, office, and various indoor and outdoor settings, ensuring a safer living and working space.
Its compact and portable design makes it an ideal tool for both professional and personal use, allowing for easy handling and on-the-go measurements.

2. Key Features
- 3-in-1 Functionality: Detects electric field radiation, magnetic field radiation, and temperature with a single device.
- Sound & Light Alarm: Emits audible and visual alerts when detected radiation data exceeds predefined safety thresholds.
- Data Lock Function: Allows for one-button locking of radiation values for convenient reading and analysis of detected data.
- Portable Size: Designed for easy handling and everyday use, fitting comfortably in one hand.
- LCD Display with Backlight: Features a clear LCD screen with an adjustable backlight, providing easy readability and graphical display of radiation trends.
- Wide Applications: Suitable for use in various environments including homes, offices, and both indoor and outdoor settings, for monitoring radiation from computers, TVs, refrigerators, and other electronic devices.

3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the S8602 detector.
- Slide or unclip the cover to open the compartment.
- Insert three (3) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Batteries are NOT included with the device.
- Replace the battery compartment cover securely.

4. Operating Instructions
4.1 Device Layout and Controls

- Front Induction Detection Area: The top part of the device where sensors are located for detecting electromagnetic fields.
- LCD Display: Shows readings, mode, alarm status, and battery level.
- MODE Button: Cycles through different measurement modes (Electric Field, Magnetic Field, Temperature).
- Backlight Key: Toggles the LCD display backlight on/off for better visibility in various lighting conditions.
- Power On/Off Key: Press and hold to turn the device on or off.
- RANGE Button: Used to switch between different measurement ranges or units if applicable (e.g., average/maximum/minimum).
- HOLD Button: Locks the current reading on the display for easier data recording.
4.2 Basic Operation
- Power On: Press and hold the Power On/Off key until the LCD display illuminates.
- Select Mode: Press the MODE button to cycle through Electric Field (V/m), Magnetic Field (μT), and Temperature (°C/°F) measurement modes. The active mode will be indicated on the display.
- Take Readings: Point the front induction detection area towards the object or area you wish to measure. The readings will be displayed on the LCD screen.
- Data Hold: To freeze the current reading on the display, press the HOLD button. Press it again to resume live measurements.
- Backlight Control: Press the Backlight key to turn the display backlight on or off as needed.
- Alarm Function: If the detected radiation exceeds the preset safety threshold (40 V/m for electric field, 0.04 μT for magnetic field), the device will emit a sound and light alarm.
- Power Off: Press and hold the Power On/Off key until the display turns off.

5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Battery Replacement: Replace batteries promptly when the low battery indicator appears on the display to ensure accurate readings.
- Avoid Impact: Protect the device from drops and strong impacts, which can damage internal components.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Batteries are dead or incorrectly installed. | Check battery polarity; replace with fresh AAA batteries. |
| Inaccurate readings. | Low battery; interference from other devices; device malfunction. | Replace batteries; move away from other electronics; contact support if problem persists. |
| Alarm sounds frequently. | High radiation levels detected. | Move away from the source of radiation; verify the source of high EMF. |
| Display is dim or unreadable. | Backlight is off; low battery. | Press the Backlight key; replace batteries. |
7. Specifications
| Parameter | Value |
|---|---|
| Material | ABS |
| Reading Display | 3-1/2 digit display |
| Electric Field Precision | 1 V/m |
| Magnetic Field Precision | 0.01 μT |
| Temperature Precision | 0.01 ℃/℉ |
| Electric Field Range | 1 V/m ~ 1999 V/m |
| Magnetic Field Range | 0.01 μT ~ 99.99 μT |
| Temperature Range | -10 ℃ ~ 70 ℃ |
| Electric Field Alarm Threshold | 40 V/m |
| Magnetic Field Alarm Threshold | 0.04 μT |
| Test Bandwidth | 5 Hz ~ 3500 Hz |
| Sampling Time | Approximately 0.4 S |
| Operating Temperature | 0 ℃ ~ 50 ℃ |
| Operating Humidity | ≤ 80% RH |
| Working Voltage | Direct current 4.5 V |
| Power | 3 * AAA batteries (NOT INCLUDED) |
| Dimensions (L x W x T) | 152mm x 52mm x 26.5mm |
| Weight | 125g / 4.4 ounces |

8. User Tips
- For best results, perform measurements in a quiet environment to clearly hear the sound alarm.
- When measuring, try to keep the device still and avoid sudden movements to ensure stable readings.
- Remember that the device measures ambient radiation; readings can fluctuate based on proximity to electronic devices and power lines.
- Utilize the data hold function when moving the device or when readings are unstable to capture specific values.

9. Warranty and Support
For detailed warranty information, technical support, or service inquiries regarding your S8602 Digital Radiation Detector, please refer to the official product page or contact the seller directly. Keep your purchase records for any warranty claims.