Introduction
The UGREEN 240W USB C Gen2 Cable is a high-performance accessory designed for fast charging, rapid data transfer, and 4K video output. This cable supports Power Delivery (PD) up to 240W, offers data transfer speeds of up to 10Gbps, and can output 4K video at 60Hz. It is built with durability in mind, featuring an aluminum shell, reinforced connectors, and a braided cable, and incorporates a Smart E-Marker Chip for enhanced safety and performance.
Figure 1: UGREEN 240W USB C Gen2 Cable overview, highlighting 4K UHD, 240W Power Delivery, 1000MB/s data, and QC4.0 compatibility.
Setup
Connecting your UGREEN USB C cable is straightforward. Ensure both your source and destination devices have compatible USB-C ports.
- Identify Ports: Locate the USB-C ports on your devices (e.g., laptop, smartphone, monitor, charger).
- Connect Cable: Insert one end of the UGREEN USB C cable into the USB-C port of your source device (e.g., power adapter, computer).
- Connect to Destination: Insert the other end of the cable into the USB-C port of your destination device (e.g., smartphone, external display, external SSD).
- Verify Connection: For charging, ensure the charging indicator appears on your device. For data transfer, verify the device is recognized. For video output, ensure the display is detected.
Figure 2: Example of connecting the cable for high-power charging, illustrating faster charging with 240W compared to 60W.
Operating Instructions
This versatile USB C cable supports three primary functions:
1. High-Speed Charging (Up to 240W)
- Connect the cable between a compatible USB-C power adapter and your USB-C device.
- The cable supports Power Delivery (PD) up to 240W, allowing for rapid charging of laptops, tablets, and smartphones.
- Ensure your power adapter and device also support the desired wattage for optimal charging speed.
Figure 3: Charging performance comparison for MacBook Pro 14", showing UGREEN 240W cable charging to 88% in 35 minutes compared to 68% with a 100W cable.
2. 10Gbps Data Transfer
- Connect the cable between two USB-C devices that support USB 3.2 Gen 2 for high-speed data syncing.
- Achieve data transfer rates of up to 10Gbps, significantly faster than older USB standards.
- Ideal for transferring large files, such as HD movies or extensive document archives, in seconds.
Figure 4: Data transfer speed comparison, showing 10Gbps for USB 3.1 Gen 2, 5120Mbps for USB 3.1 Gen 1, and 480Mbps for USB 2.0.
3. 4K@60Hz Video Output
- Use the cable to connect a compatible USB-C device (e.g., MacBook, laptop) to an external monitor or display.
- The cable supports 4K video output at 60Hz (Max 3840x2160).
- Important Note: The video output function requires your source device's USB-C port to support DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3/4.
Figure 5: Connecting for 4K video output, showing a laptop connected to a large screen TV.
Maintenance
To ensure the longevity and optimal performance of your UGREEN USB C cable, follow these maintenance guidelines:
- Handle with Care: Avoid excessive bending, twisting, or pulling on the cable, especially near the connectors. The cable is designed for durability with reinforcement and braided nylon, but extreme stress can still cause damage.
- Proper Storage: When not in use, coil the cable loosely. Avoid tightly wrapping it around objects or sharp corners.
- Keep Clean: Periodically wipe the cable and connectors with a dry, soft cloth to remove dust and debris. Do not use liquid cleaners directly on the connectors.
- Avoid Extreme Conditions: Do not expose the cable to extreme temperatures, direct sunlight for prolonged periods, or corrosive liquids.
- Inspect Regularly: Check the cable and connectors for any signs of wear, fraying, or damage. If damage is observed, discontinue use to prevent potential hazards.
Figure 6: Durable construction of the UGREEN USB C cable, featuring an aluminum shell, reinforcement, and braided cable for enhanced lifespan.
Troubleshooting
If you encounter issues with your UGREEN USB C cable, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging or charging slowly. |
|
|
| Data transfer is slow or not working. |
|
|
| No video output to external display. |
|
|
| Cable appears damaged. | Physical wear and tear. | Discontinue use immediately. Replace with a new cable. |
Specifications
| Feature | Specification |
|---|---|
| Brand | UGREEN |
| Model Name | US355 5A Type C Cable (USB3.1 Gen2 USB C to USB C Cable) |
| Connector A | Type-C |
| Connector B | Type-C |
| Maximum Current | 5A |
| Output Power | 240W (Max), compatible with 140W, 100W, 87W, 61W, 45W, 30W, 18W PD |
| Data Transfer Speed | 10Gbps (USB 3.2 Gen 2) |
| Video Output | 4K/60Hz (Max 3840x2160), compatible with Thunderbolt 3 |
| Features | Fast Charge, E-Marker Chip, Aluminum Shell, Reinforced, Braided Cable |
| Certifications | FCC, CE, RoHS |
Figure 7: Key features and specifications of the cable, including 10Gbps sync, 3-year lifespan, 4K@60Hz video output, 240W fast charge, Smart E-Marker chip, and PD 3.1 support.
User Tips
- For optimal charging speeds, always pair this 240W cable with a power adapter that can deliver high wattage (e.g., 100W, 140W, or 240W).
- When using for video output, confirm your device's USB-C port supports DisplayPort Alternate Mode (DP Alt Mode) for successful display mirroring or extension.
- To maximize data transfer speeds, ensure both the source and destination devices are equipped with USB 3.2 Gen 2 compatible ports.
- The E-Marker chip provides built-in safety features. While robust, avoid exposing the cable to physical damage or extreme environments to maintain its integrity.
Warranty and Support
UGREEN products are manufactured to high-quality standards. For any technical assistance, warranty claims, or product support, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty purposes.