Introduction
Thank you for choosing the DIXSG Wooden Headphones Stand Holder. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new headphone stand. Please read this manual thoroughly before installation and keep it for future reference.
This headphone stand features a combination of solid wood and integral aluminum alloy, designed for durability and an elegant aesthetic. It offers a stable and convenient solution for storing your headphones, keeping your desk tidy and your headset easily accessible.
Package Contents
Please verify that all components are present and in good condition:
- 1 x Headphone Bracket (wooden rest attached to metal plate)
- 1 x Desk Clamp (aluminum alloy)
- 4 x Screws (for attaching bracket to clamp or for direct mounting)
- 1 x Hex Key (for tightening screws)
Setup and Installation
The DIXSG Headphone Stand offers versatile installation options: a desk clamp for temporary or flexible placement, and a screw-fixed method for permanent mounting.
Method 1: Desk Clamp Installation
- Attach the Bracket to the Clamp: Align the metal plate of the headphone bracket with the top part of the aluminum alloy desk clamp. Use the provided screws and hex key to securely fasten the bracket to the clamp.
- Select Installation Position: Choose a suitable edge on your desk or table. The clamp is compatible with surfaces between 12mm and 63mm thick.
- Secure the Clamp: Place the clamp onto the chosen edge. Turn the tightening screw on the clamp until it is firmly secured to the desk. Ensure it is stable and does not wobble.
Method 2: Screw-Fixed Installation (Optional)
If you prefer a permanent fixture, the headphone bracket can be directly screwed onto a suitable surface.
- Mark Drilling Points: Hold the metal plate of the headphone bracket against the desired surface (e.g., underside of a shelf, wall). Mark the positions for the two screw holes.
- Drill Pilot Holes: Carefully drill pilot holes at the marked positions.
- Secure the Bracket: Align the bracket with the pilot holes and use the provided screws to fasten it securely to the surface. Ensure it is stable.
Operation
Once installed, the headphone stand is ready for use:
- Placing Headphones: Gently place your headphones over the U-shaped wooden rest. The double arc design is crafted to fit the head beam naturally, reducing pressure and preventing accidental slipping.
- Versatile Storage: While primarily designed for headphones, the stand can also be used to hang other items such as necklaces, cables, or hats, helping to keep your space organized.
Video 1: Product Assembly and Usage Demonstration
Maintenance
- Cleaning: Wipe the wooden and metal surfaces with a soft, dry cloth to remove dust and fingerprints. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals, as these can damage the finish of the wood or metal.
- Environmental Conditions: Keep the stand in a dry environment. While the wood is anti-corrosion and moisture-resistant, prolonged exposure to extreme humidity or direct sunlight may affect its longevity.
Troubleshooting
- Stand feels unstable:
- For clamp installation: Ensure the tightening screw is fully tightened and the clamp is securely gripping the desk surface. Verify the desk thickness is within the 12mm-63mm range.
- For screw-fixed installation: Check that all mounting screws are firmly tightened.
- Headphones slipping off:
- Ensure headphones are placed centrally on the U-shaped rest. The design is intended to prevent slipping, but extreme angles or very narrow headbands might require careful placement.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | DIXSG |
| Product Name | Clip-on Headphone Holder |
| Material | Solid Wood (Walnut/Beech), Integral Aluminum Alloy |
| Origin | Mainland China |
| Compatibility (Clamp) | Desktops/Table legs with thickness 12mm-63mm |
| Product Weight | Approx. 150g |
| Headphone Rest Dimensions | 8cm (Width) x 5.9cm (Depth) |
| Bracket Plate Dimensions | 3cm (Width) x 8.6cm (Height) |
| Clamp Dimensions | 3cm (Width) x 8cm (Height) |
User Tips
- Maximize Space: Utilize the clamp feature to free up valuable desk space, keeping your headphones off the surface and out of the way.
- Beyond Headphones: Don't limit its use to just headphones. Its sturdy design makes it suitable for hanging other small items like VR headsets, cables, or even light bags.
- Aesthetic Integration: The natural wood and sleek aluminum design complement various desk setups, adding a touch of elegance.
Frequently Asked Questions (FAQ)
- Q: In what ways can this item be utilized?
- A: This item is primarily designed as a holder for headphones, which can be clamped to a desk or table edge. It helps organize your workspace and keep your headphones easily accessible. It can also be used for hanging other small accessories.
Warranty and Support
For warranty information, returns, or technical support, please refer to the seller's specific policies or contact their customer service directly.
A user manual in PDF format may also be available from the seller: View User Manual (PDF)