1. Introduction
The SVBONY SV705C is a high-performance color planetary camera designed for astronomical imaging, including planetary, lunar, solar, and Electronically Assisted Astronomy (EAA). It features the advanced Sony IMX585 CMOS sensor, delivering high resolution and exceptional low-light performance with minimal readout noise. This manual provides essential information for setting up, operating, and maintaining your SV705C camera.
2. Safety Information
Always handle the camera with care. Avoid direct exposure to strong light sources, especially the sun, without proper solar filters when connected to a telescope, as this can damage the sensor and your eyes. Keep the device away from moisture and extreme temperatures. Do not attempt to disassemble the camera, as this will void the warranty and may cause damage.
3. Package Contents
Please verify that all items listed below are included in your package:
- SV705C Astronomy Camera X1
- M42-CS Adapter X1
- T2 Adapter X1
- CS-C Adapter X1
- 1.25-inch T-Adapter X1
- 2-inch Cover X1
- USB3.0 Cable X1
- ST4 Guiding Cable X1
- User Manual X1
- Cleaning Cloth X1

4. Product Features
4.1 SONY IMX585 CMOS Sensor
The SV705C utilizes the SONY IMX585 CMOS color sensor. This sensor has a large format of 1/1.2 inches, with a pixel size of 2.9µm x 2.9µm, and a high resolution of 8.30 Mega Pixels (3586x2180). Its back-illuminated structure and advanced pixel technology contribute to very low readout noise and a large full well capacity (38ke-), making it highly effective in low light conditions. It offers approximately 1.7 times improved sensitivity at 850nm wavelength compared to the IMX485 sensor.

4.2 Quantum Efficiency (QE) Peak
The camera boasts a Quantum Efficiency (QE) peak of approximately 90%. This high QE allows the sensor to capture high-quality images even in the near-infrared range.

4.3 No Amp Glow
The SV705C camera is designed to eliminate 'Amp Glow', ensuring completely high-quality 'dark' images even during long exposures or with high gain settings.

4.4 Low Readout Noise (HCG Mode)
Incorporating HCG (High Conversion Gain) digital noise reduction technology, the camera significantly reduces readout noise while maintaining a high dynamic range.

4.5 ST4 Guiding Port
Equipped with an ST4 guiding port, the camera supports PHD2 and ASCOM platforms, allowing connection to a mount via a guiding cable for precise control through computer software.

4.6 USB 3.0 & DDRIII Buffer 128MB
The SV705C features a USB 3.0 data transmission interface and a built-in 128MB DDR3 buffer. This ensures stable and high-speed data transmission, making the camera efficient for planetary, lunar, and solar imaging.

4.7 Supports ROI & BIN
The camera supports Region of Interest (ROI) and binning (1x1, 2x2). ROI allows for setting auto resolution, which increases the frame rate for planetary imaging. Binning 2x2 is useful for framing and focusing, as larger pixels gather light faster, enhancing sensitivity for faint objects in shorter exposures.

4.8 M42*0.75 Thread
The camera features an M42*0.75 thread. With an M42-CS adapter, it can connect to a CS lens for time-lapse photography or to a CCTV camera lens for surveillance applications like meteor shower monitoring.

4.9 Anti-reflection Coating & 1/4-20 Screw Hole
The protective window has an AR (Anti-reflection) coating, sensitive to visible and near-infrared light, allowing for various imaging techniques with different filters. A 1/4-20 screw hole is available for connecting the camera to a standard tripod, enabling its use for monitoring.

5. Setup Instructions
5.1 Connecting to a Telescope
The SV705C camera can be connected to a telescope using the provided adapters. Ensure the correct adapter (e.g., 1.25-inch T-Adapter, M42-CS Adapter) is used based on your telescope's focuser or imaging train. For guiding, connect the ST4 guiding cable from the camera to your mount's guiding port.



5.2 Computer Connection
Connect the camera to your computer using the provided USB 3.0 cable. The camera is compatible with Windows, Linux OS, Raspberry Pi, Mac OS, and Chrome OS. Ensure your computer meets the minimum specifications: Intel 4th generation i5 processor and 4GB RAM for desktops, or Intel 6th generation i5 processor and 8GB RAM for laptops.

5.3 Software Installation
Drivers and capture software are available on the SVBONY official website. Install the necessary drivers before connecting the camera. Popular software like AstroDMx Capture can be used for image acquisition.
6. Operating Instructions
6.1 Planetary, Lunar, and Solar Imaging
For planetary, lunar, and solar imaging, use appropriate filters (e.g., solar filter for solar imaging) to protect the camera sensor and your eyes. Utilize the camera's high frame rate and ROI feature to capture detailed images of celestial objects. Adjust exposure time and gain settings in your capture software for optimal results.


6.2 Deep-sky Imaging
For deep-sky objects, the camera's low readout noise and high QE are beneficial. Use longer exposure times and the ST4 guiding port for accurate tracking. The HCG mode helps in reducing noise for clearer images.

6.3 Software Usage
Familiarize yourself with your chosen astronomical capture software (e.g., AstroDMx Capture). This software allows you to control camera settings such as exposure time, gain, resolution (ROI), and binning. It also facilitates saving captured images and videos.


7. Maintenance
7.1 Cleaning the Sensor
If dust appears on the sensor, use a specialized air blower or a sensor cleaning kit designed for astronomical cameras. Avoid touching the sensor directly with your fingers or abrasive materials, as this can cause permanent damage.
7.2 Storage
Store the camera in a dry, dust-free environment within the recommended storage temperature of -20°C to +60°C and storage humidity of 20%-90%. Use the provided caps to protect the sensor and ports when not in use.
7.3 General Care
Avoid dropping the camera or subjecting it to strong impacts. Keep all ports clean and free from debris. Regularly check cables for any signs of wear or damage.
8. Troubleshooting
8.1 Camera Not Detected
- Ensure the USB 3.0 cable is securely connected to both the camera and the computer.
- Verify that the correct drivers are installed for your operating system.
- Try a different USB port or cable.
- Restart your computer and the imaging software.
8.2 No Image in Software
- Check if the camera is correctly selected as the imaging device in your capture software.
- Ensure exposure settings are appropriate for the light conditions (e.g., not too short for faint objects or too long for bright objects).
- Verify that the camera's protective cap has been removed.
8.3 Blurry Images
- Carefully adjust the focus of your telescope.
- Ensure the telescope and mount are stable and tracking accurately.
- Verify correct back focal length if using reducers/flatteners or other optical accessories.
8.4 Excessive Noise
- Adjust gain settings in your software; lower gain generally results in less noise.
- Ensure the camera is operating within its optimal temperature range.
- Utilize HCG mode if available in your software to reduce digital noise.
- Consider taking dark frames to calibrate and remove fixed pattern noise.
9. Specifications

| Attribute | Value |
|---|---|
| Model Number | SV705C |
| Sensor | IMX585 |
| Pixels | 8.3 Mega Pixels |
| Sensor Type | Color Sensor |
| Diagonal | 12.85mm |
| Max Resolution | 3856x2180 |
| Pixel Size | 2.9µm x 2.9µm |
| Chip Size | 11.2mmx6.3mm |
| Frame Rate | 45FPS |
| Shutter Type | Rolling Shutter |
| Exposure Time | 32µs-2000s |
| Readout Noise | 6.5e~0.7e |
| Full Well | 38ke |
| ADC bits | 12 bits |
| ROI | YES |
| BIN | 1X1 2X2 |
| Caching | 128M |
| Guiding Port | ST4 |
| Data Port | USB3.0 |
| Adapter | 1.25-in/2-in/ M42X0.75/CS/C |
| Back Focal Length | 6.5mm/12.5mm |
| Protective Window | AR Coating |
| Working Humidity | 30%-80% |
| Storage Humidity | 20%-90% |
| Operating Temperature | -10℃ to +50℃ |
| Storage Temperature | -20℃ to +60℃ |
| Support Telescope | Telescope with 1.25 inch aperture |
| Camera Interface Type | M42 interface |
| Gain value | 0-500dB |
| Operating System | Windows, Linux OS Raspberry Pi, Mac OS, Chrome OS |
10. User Tips
- Optimal Performance: For best results in planetary imaging, use short exposure times and high frame rates. For deep-sky objects, longer exposures with guiding are recommended to capture faint details.
- Software Exploration: Experiment with different settings in your capture software (e.g., gain, exposure, ROI, binning) to find what works best for various celestial targets and sky conditions. Many users find that fine-tuning these settings significantly improves image quality.
- Filter Usage: Utilize appropriate filters (e.g., UV-IR cut, IR pass) to enhance specific details or reduce light pollution, depending on your imaging goals. Research common filters for your target objects.
- Cable Management: Ensure all cables (USB, ST4 guiding) are neatly managed and secured to prevent snagging or accidental disconnections during imaging sessions.
11. Warranty and Support
For technical support, warranty information, or service inquiries, please contact SVBONY customer service through their official website or the contact details provided with your purchase. Keep your purchase receipt and product serial number for any warranty claims or support requests.