JUNCTEK UDB1008S

Contents

JUNCTEK UDB1008S 8MHz DDS Function Signal Generator User Manual

Model: UDB1008S | Brand: JUNCTEK

Introduction

The JUNCTEK UDB1008S is a single-channel Direct Digital Synthesis (DDS) function signal generator designed with FPGA technology, offering exceptional signal stability and ease of use. This versatile device can generate various waveforms including sine, square, triangle, saw tooth, pulse, and TTL digital signals. It is an ideal tool for electronics enthusiasts, educational institutions, and professional laboratories.

Key features include frequency sweep capabilities, computer communication control, precise frequency adjustment with a minimum resolution of 0.01Hz, and adjustable amplitude and DC offset. The unit also provides 10 memory locations for storing frequently used parameters and operates on a convenient DC 5V 1A power supply.

Front view of the UDB1008S DDS Function Signal Generator with LCD displaying frequency and function.

Front view of the UDB1008S DDS Function Signal Generator with LCD displaying frequency and function.

Product Overview Video

Video demonstrating the physical components and basic functions of the UDB1000 function signal generator, highlighting the LCD, function buttons, knob, channel interface, power interface, power switch, amplitude adjustment potentiometer, and bias adjustment potentiometer.

Image highlighting the function signal generator's capabilities: 0.01Hz to 5MHz, frequency meter/counter, and output waveforms (triangular, square, sine, TTL digital signal).

Image highlighting the function signal generator's capabilities: 0.01Hz to 5MHz, frequency meter/counter, and output waveforms (triangular, square, sine, TTL digital signal).

Setup

  1. Power Connection: Connect the provided DC 5V 1A power adapter to the power interface on the device.
  2. Identify Interfaces: Locate the output channel interface for connecting to external circuits.
  3. Power On: Use the power switch to turn on the device. The LCD screen should illuminate and display initial settings.
  4. PC Connection (Optional): For computer control, connect a USB-to-TTL serial data cable to the device. Ensure necessary drivers and communication software are installed on your computer.
UDB1008S DDS Function Signal Generator with a power adapter.

UDB1008S DDS Function Signal Generator with a power adapter.

Operating Instructions

Waveform Generation

  • Waveform Selection: Use the function buttons to cycle through and select the desired output waveform (sine, square, triangle, saw tooth, pulse, TTL digital signal).
  • Frequency Adjustment: Rotate the digital encoder knob to adjust the output frequency. The minimum resolution is 0.01Hz, allowing for precise control.
  • Amplitude and DC Offset: Use the adjustable resistors (potentiometers) to control the amplitude and DC offset of the output signal.
  • Square Wave Duty Cycle: For square waves, the duty cycle can be continuously adjusted from 1% to 99%.

Frequency Sweep Function

The UDB1008S supports frequency sweep mode, allowing the output frequency to automatically scan within a defined range.

  • Scan Mode: Select 'Sweep Frequency'.
  • Scan Time: Set the sweep duration from 1 second to 99 seconds.
  • Scan Range: Define the start (fM1) and end (fM2) frequencies for the sweep.

Frequency Meter and Counter

The device can also function as a frequency meter and counter for external signals.

  • Frequency Measurement Range: 1Hz to 60MHz.
  • Input Voltage: Minimum 0.5Vp-p, Maximum 20Vp-p.
  • Count Range: 0 to 4,294,967,295.
  • Counting Method: Manual.

Parameter Storage

The UDB1008S allows you to save and recall up to 10 sets of parameters (M0 to M9). The device will automatically load the M0 data upon startup.

PC Communication

For advanced control and data logging, the UDB1008S can be connected to a computer.

  • Interface: Use a USB-to-TTL serial data cable.
  • Communication Rates: Supports 19200bps and 57600bps.
  • Protocol: The communication protocol is open and operates in command mode. Computer software for control is provided free of charge.

Maintenance

  • Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
  • Environment: Store and operate the device in a dry environment, away from direct sunlight, extreme temperatures (-10℃ to 50℃), and high humidity (below 80%).
  • Power Supply: Always use the specified DC 5V 1A power supply to prevent damage.
  • Handling: Handle the device with care to avoid physical shock or damage to the components and interfaces.

Troubleshooting

  • No Display/Power: If the device does not power on or the LCD remains blank, check the power adapter connection and ensure it is supplying the correct voltage (DC 5V).
  • No Output Signal: Verify that the correct waveform type is selected, and that the frequency, amplitude, and DC offset settings are appropriate for your application. Ensure all output connections are secure.
  • Incorrect Frequency Reading (Counter Mode): Ensure the external signal connected to the input is within the specified voltage (0.5Vp-p to 20Vp-p) and frequency (1Hz to 60MHz) ranges for accurate measurement.
  • PC Communication Issues: Check the USB-to-TTL serial data cable connection. Confirm that the correct drivers are installed on your computer and that the communication software is configured with the correct baud rate (19200bps or 57600bps).

Specifications

FeatureSpecification
Model NumberUDB1008S
Brand NameJUNCTEK
DIY SuppliesElectrical
Display Size2.9 Inches & Under
Sine Wave Frequency Range0~8MHz
Square Wave Frequency Range0~1MHz
Triangle Wave Frequency Range0~1MHz
Frequency Sweep FunctionYes
Sweep ModeSweep Frequency
Sweep Time1S-99S
Sweep RangefM1-fM2
Frequency Measurement Range1Hz-60MHz
Count Range0-4294967295
Count ModeManual
Output Impedance50Ω±10%
Square Wave Rise/Fall Time≤100ns
Square Wave Overshoot≤5%
Square Wave Duty Cycle Range1%~99%
TTL Signal Output Level>3Vpp
TTL Signal Fanout Coefficient>20TTL negative number
Power SupplyDC5V±0.5V
Product Dimension95*65*25mm
Net Weight88g (Host) / 72g (Power Configuration)
Working Environment Temperature-10℃-50℃
Working Environment Humidity<80%

User Tips

Based on available information, no specific user tips or common usage advice were found in the provided reviews or Q&A. For optimal performance, always refer to the detailed operating instructions and specifications.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.