1. Introduction
The Cloudray LiteMarker-M is a versatile and cost-effective fiber laser marking machine designed for high-precision engraving and marking on various materials. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your LiteMarker-M machine to ensure safe and efficient use.
2. Safety Information
Always prioritize safety when operating laser equipment. Failure to follow safety guidelines can result in serious injury or damage to the machine.
- Eye Protection: Always wear appropriate laser safety goggles when the machine is in operation.
- Ventilation: Ensure adequate ventilation in the work area to dissipate fumes and particles generated during marking.
- Material Safety: Only mark materials approved for laser processing. Avoid highly reflective or flammable materials without proper precautions.
- Emergency Stop: Familiarize yourself with the location and operation of the emergency stop button.
- Protective Cover: Consider purchasing and using an optional laser protective cover for enhanced safety.
3. Product Overview and Components
The LiteMarker-M machine consists of several key components:
- Cabinet: Houses the laser unit and control board (FBLI-B-LA4V).
- Switch Button: Main power switch for the machine.
- Galvo Head: Directs the laser beam for marking.
- Light Path: Integrated optical system.
- F-theta Lens: Focuses the laser beam onto the work surface.
- Lifting Column: Allows adjustment of the working distance.
- Workbench: Stable platform for placing materials.
4. Setup
- Unpacking: Carefully remove all components from the packaging. Verify that all items listed in the 'Package Contents' section are present.
- Assembly:
- Place the main unit (cabinet) and the marking head assembly on a stable workbench.
- Connect the galvo head to the cabinet via the provided cables.
- Ensure the F-theta lens is securely attached to the galvo head.
- If using a rotary attachment, connect it according to its specific instructions.
- Power Connection: Connect the power cable to the machine and a suitable power outlet (110-230V AC, 50/60Hz, single-phase). The machine is designed to operate within this voltage range.
- Computer Connection: Connect the machine to your computer using the provided USB cable.
- Software Installation: Install the EZCAD2 or Lightburn software on your computer. The machine is compatible with both.
- Initial Power On: Flip the main power switch on the machine. The power indicator should illuminate.
5. Operation
This section outlines the general steps for operating your LiteMarker-M machine.
- Software Launch: Open EZCAD2 or Lightburn software on your computer.
- Design Creation/Import: Create your desired marking design or import an existing file.
- Material Placement: Place the material to be marked on the workbench.
- Focusing: Adjust the lifting column to achieve the correct focal distance. The machine features a high brightness red light for precise positioning and framing of the marking area.
- Parameter Settings: Set the appropriate laser parameters (power, speed, frequency, etc.) based on the material and desired effect. Refer to the 'Technical Data' section for general guidelines.
- Framing: Use the software's framing function to preview the marking area on your material. The red light will outline the path the laser will take.
- Start Marking: Initiate the marking process from the software.
5.1. Marking Capabilities
- High Speed & Precision: The machine boasts an 8000mm/s marking speed and 0.01mm precision, ensuring fast and accurate results.
LiteMarker-M offers superior marking speed and precision. - Engraving Depth: The engraving depth varies by laser power:
- 30W: 0.5mm
- 50W: 1mm
- 60W: 1.5mm
Engraving depth capabilities based on laser power. - Material Compatibility: Suitable for a wide range of materials including copper plate, stainless steel, steel bottle, steel ornament, steel pendant, aluminum hangtag, metal card, gold bracelet, aluminum buttons, ceramic cup, bottle opener, steel kettle, pottery, and more.
Endless application possibilities on diverse materials. - Color Marking: The 60W JPT M7 Series supports color marking on certain materials.
Color marking examples using the 60W JPT M7 Series.
5.2. Expanding Working Area
The scanning working area can be upgraded with an optional F-theta lens and column heightening block.
- Standard: 110*110mm
- Upgradable to: 175*175mm, 200*200mm
6. Maintenance
- Cleaning: Regularly clean the F-theta lens and galvo head with a soft, lint-free cloth and appropriate lens cleaning solution.
- Dust Removal: Keep the machine free from dust and debris, especially around ventilation openings.
- Cable Inspection: Periodically check all cables for wear or damage.
- Software Updates: Keep your EZCAD2 or Lightburn software updated to the latest version.
7. Troubleshooting
If you encounter issues with your LiteMarker-M, consider the following general troubleshooting steps:
- No Power: Check power cable connections and ensure the main switch is ON.
- Laser Not Firing: Verify software settings, ensure the laser is enabled, and check for any error messages.
- Poor Marking Quality: Check focal distance, laser parameters, and cleanliness of the lens.
- Software Communication Issues: Ensure USB cable is securely connected and drivers are correctly installed. Restart both the machine and computer.
For persistent issues, contact Cloudray customer support.
8. Specifications
| Feature | Description |
|---|---|
| Brand Name | Cloudray |
| Model Number | Litemarker-M Fiber Marking Machine |
| CLOUDRAY Model | LiteMarker-M |
| Operating System | EZCAD2 |
| Certification | CE |
| Origin | Mainland China |
| Application | Fiber Marking Machine, Laser engraving machine, Jewelry shop, pet tag, pendent, party decoration, 3C shop etc |
| Laser Type | Nominal Average Output Power | Central Wavelength | Frequency | Pulse Width | Cooling |
|---|---|---|---|---|---|
| MAX 30W | ≥30W | 1064 nm | 40-60khz | 100±10ns @45khz | Air cooled |
| MAX 50W | 51±1 | 1064 nm | 45-170khz | 100±10ns @45khz | Air cooled |
| JPT M7 60W | ≥60W | 1064 nm | 1~4000KHz | 2~500ns | Air cooled |
| Feature | Value |
|---|---|
| Marking Area | 110 x 110 mm / 175 x 175 mm / 200 x 200 mm |
| Repeatability | <13 µrad |
| Max Marking Speed | 8000 mm/s |
| Positioning Speed | 12 m/s with F=160 mm |
| Feature | Value |
|---|---|
| Computer System | Microsoft Windows XP, VISTA, Win7, Win10, Win11 |
| Interfaces | USB |
| Marking Software | BSL Lite / LightBurn |
| Correction Software | CorFile2 |
| Laser Power | Adjustable from 1 - 100% |
| Condition | Value |
|---|---|
| Operating Temperature | +5 to +35°C |
| Relative Humidity | max. 90% Non-condensing |
| Power Requirements | 110-230V AC, 50/60Hz, single-phase |
| Power Consumption | Max. 400 W |
| Equipment Protection (Marking head) | IP54 |
| Equipment Protection (Laser unit) | IP20 |
| EFL (mm) | SCAND FIELD (mm) | 30W | 50W | 60W |
|---|---|---|---|---|
| F=100 | 70*70 | A+ | A+ | A+ |
| F=163 | 110*110 | A+ | A+ | A+ |
| F=210 | 150*150 | A+ | A+ | A+ |
| F=254 | 175*175 | A+ | A+ | A+ |
| F=290 | 200*200 | B | A | A+ |
| F=420 | 300*300 | C | B | A |
Legend: A+: Very good effect, strong after laser focusing; A: Moderate effect, with efficiency lower than Atfield lens; B: The effect is average, suitable for materials with low energy density requirements; C: Weak light, not recommended for use.
9. Package Contents
The standard package includes the following items:
- Power Cable (x1)
- Allen Wrench Set (x1)
- Safety Goggles (x1)
- U Disk (x1)
- Aluminum Card (x1)
- Screwdriver (x2)
- USB Cable (x2)
- Positioning Bar (x2)
- Laser Test Report (x1)
- Machine Test Report (x1)
- Warranty Card (x1)
- User Manual (x1)
9.1. Optional Accessories
Depending on your order, additional accessories may be included or can be purchased separately:
Rotary Attachment Set
- D69M2 Rotary Attachment (x1)
- Power Cord (x1)
- USB Cable (x1)
Protective Cover Set
- Flange (x1)
- Philips Screwdriver (x1)
- Power Signal Cable (x1, for standard only)
- Top Cap (x1)
50W/60W Additional Package
- 200x200mm F-theta Lens (x1)
- Column Heightening Block (x1)
10. User Tips
- Quick Engraving: The machine's 8000mm/s marking speed and 0.01mm precision make it highly efficient for quick engraving tasks, such as adding names or initials to jewelry at events.
- Lens Compatibility: The scanning working area can be easily upgraded by using an optional F-theta lens. Refer to the provided F-theta lens compatibility table to select the best lens for your specific laser power and desired working area.
- Laser Source: The LiteMarker-M uses MAX 30W, MAX 50W, or JPT M7 60W laser types, as detailed in the technical specifications.
- Voltage Compatibility: The machine supports 110-230V AC, 50/60Hz, single-phase power. It is designed to adapt to these voltages.
- Marking Area Preview: Utilize the red light framing feature to accurately preview the laser's marking path on your material before starting the engraving process.
11. Warranty and Support
11.1. Warranty
Cloudray machines are equipped with high-quality parts and come with a 12-month warranty. Technical support is provided throughout the warranty period. Even after the warranty expires, a 10% discount is offered on replacement machine parts.
11.2. Customer Support
Cloudray offers one-on-one customer service. Do not hesitate to contact us if you have any questions or require assistance.
- Telephone: +86-17705182720
- WhatsApp: +86-17705182720
- Skype: +86-17705182720
- WeChat: 17705182720
- Email: service@cloudray.com