1. Introduction and Overview
The PowMr Hybrid Solar Inverter is an all-in-one solution designed for efficient and reliable power conversion. It integrates a pure sine wave inverter, an MPPT solar charger, and a battery charger into a single unit. Available in 1.6KW and 3KW models, it supports 12V or 24V battery systems and provides a 220V AC output. This inverter is ideal for various applications, from household use to off-grid systems.

2. Product Features
- Pure sine wave inverter output.
- Configurable input voltage range for home appliances and personal computers via LCD setting.
- Configurable battery charging current based on applications via LCD setting.
- Configurable AC/Solar Charger priority via LCD setting.
- Compatible with mains voltage or generator power.
- Automatic restart while AC is recovering.
- Overload, over-temperature, and short circuit protection.
- Smart battery charger design for optimized battery performance.
- Cold start function.
- Optional WIFI/GPRS communication.
- Can connect to lithium batteries.
3. Package Contents
Upon opening the package, you will find the PowMr Hybrid Solar Inverter unit and a user manual.
4. Setup
4.1. Battery Connection
The inverter is compatible with a wide range of batteries including Lithium, LiFePO4, AGM, Flooded, Sealed Lead Acid, and Gel batteries. Ensure the correct battery voltage (12V or 24V) matches your inverter model.

4.2. Solar Panel Connection
The MPPT charge controller supports a maximum PV array power of 2000W (for 1.6KW model) or 3000W (for 3KW model). The PV array MPPT voltage range is 30-400Vdc, with a maximum open circuit voltage of 400Vdc.


4.3. AC Input/Output and Wiring
The nominal input voltage is 230Vac, and the output voltage is regulated at 230Vac±5%. Refer to the connection terminals on the inverter for AC IN, AC OUT, Battery, and PV IN. Always observe the "Warning High Voltage" labels and ensure proper grounding.

4.4. Safety and Protection
The inverter includes multiple protection features such as overload, over-temperature, and short circuit protection to ensure stable and safe system operation.
5. Operating Modes
The inverter offers versatile power management with configurable charging and output modes:
5.1. Charging Modes
- Only Solar: Charges batteries solely from solar power.
- Mains First: Prioritizes charging from the utility grid.
- Solar First: Prioritizes charging from solar panels.
- Mains & Solar: Utilizes both utility grid and solar power for charging.
5.2. Output Modes
- Solar First: Prioritizes solar power for load supply.
- Utility First: Prioritizes utility grid power for load supply.


6. Maintenance
- Cleaning: Regularly clean the inverter's exterior to prevent dust buildup, especially around ventilation areas.
- Ventilation: Ensure adequate airflow around the unit. The intelligent fans help manage heat and prolong battery life.
- Temperature: Operate and store the inverter within the specified temperature ranges: Operating: -10℃ to 50℃; Storage: -15℃ to 60℃.
- Connections: Periodically check all wiring connections for tightness and signs of wear.
7. Troubleshooting
- Inverter not turning on: Check all power connections, battery voltage, and ensure the unit is switched on.
- Fluctuating Solar Input/Output at Sunset: It is normal for the inverter to connect and disconnect panels or show fluctuating output during low light conditions (e.g., sunset) as it tries to optimize power harvesting.
- Fan Noise: The inverter is equipped with intelligent fans for cooling. Some fan noise is normal, especially under high load, as they work to dissipate heat and maintain optimal operating temperature.
- Connecting Solar Panels: Ensure your solar panel array's total power and voltage (MPPT range 30-400Vdc, max 400Vdc open circuit) are within the inverter's specifications (2000W for 1.6KW model) or (3000W for 3KW model). Exceeding these limits is not recommended.
- Battery Compatibility: The inverter is designed to work with various battery types, including Lithium-ion (Li-NMC, LiFePO4), Lead-acid (Flooded, AGM, Sealed Lead Acid, Gel). Ensure the correct battery type is selected in the inverter settings (if applicable).
- Parallel Operation: The provided information does not explicitly state support for connecting multiple inverters in parallel for increased power output for this specific model. Consult the manufacturer for advanced configurations.
- Beeping/Alarms: Inverters often have audible alarms for various conditions (e.g., low battery, overload, fault). Refer to the user manual's specific alarm codes and troubleshooting steps, usually accessible via the LCD display.
8. Specifications
| Attribute | POW-HVM2H-12V-N (1.6KW) | POW-HVM3.2H-24V-N (3KW) |
|---|---|---|
| Output Current | MPPT 80A | |
| Model Number | POW-HVM2H-12V-N | POW-HVM3.2H-24V-N |
| Rated Output Power | 1600W (2000VA) | 3000W (3200VA) |
| Output Voltage Waveform | Pure Sine Wave | |
| Output Voltage Regulation | 230Vac±5% | |
| Output Frequency | 50Hz/60Hz (Auto-detection) | |
| Surge Capacity | 2*rated power for 5 seconds | |
| Nominal DC Input Voltage | 12Vdc | 24Vdc |
| No Load Power Consumption | <25W | <35W |
| Charging Algorithm | 3-Step | |
| AC Charging Current (Max) | 60Amp | |
| Floating Charging Voltage | 13.5Vdc | 27Vdc |
| Max. PV Array Power | 2000W | 3000W |
| PV Array MPPT Voltage Range | 30~400Vdc | |
| Max. PV Array Open Circuit Voltage | 400Vdc | |
| Max Charging Current (AC charger plus solar charger) | 80Amp | |
| Safety Certification | CE, FCC, RoHS | |
| Operating Temperature Range | -10℃ to 50℃ | |
| Storage Temperature | -15℃ to 60℃ | |
| Size | 348*270*95mm | |
| Weight | 5.8KG | |
9. User Tips
- Noise Management: While fans are necessary for cooling, some users may notice fan noise, especially under high load. Ensure the inverter is installed in a well-ventilated area, and consider its placement if noise is a concern.
- Verify Received Model: Always verify the model number and specifications of the inverter upon receipt to ensure it matches your order.
- Optimal Performance: For optimal performance, ensure all connections are secure and configured correctly according to the manual's specifications.
10. Warranty and Support
The PowMr Hybrid Solar Inverter comes with a 1-year warranty.
For technical support, warranty claims, or further assistance, please contact PowMr customer service or your authorized dealer.