1. Introduction
Thank you for choosing the Staniot Smart Contact Sensor (Model DS200). This wireless magnetic sensor is designed to enhance the security of your home by detecting the opening and closing of doors and windows. It operates on a 433MHz frequency and is intended for use with a compatible Staniot alarm control panel, not as a standalone device.
Key features include:
- 5-Year Battery Life: Equipped with two CR2450 batteries for long-lasting operation.
- Instant APP Notifications: When paired with a Staniot security panel, it sends immediate alarm signals to the host and provides instant notifications via the mobile application.
- Easy Installation: Designed for simple installation on various types of doors and windows.
- Prying-Resistant Alarm: Features an anti-dismantling function to prevent tampering.
- Low Voltage Alarm: Notifies you when the battery needs replacement.
- Wireless Connection: Utilizes 433MHz, eV1527 wireless parameters for reliable communication with the security system.

2. Product Overview
The Staniot DS200 contact sensor consists of two main parts: a larger transmitter unit and a smaller magnetic unit. Both units are designed for discreet installation.

Components:
- Indicator: Provides visual feedback on sensor status.
- Setting Button: Used for pairing and configuration.
- Screw Holes: For optional screw-based installation.
- Magnet: The smaller unit that triggers the sensor when separated from the main unit.
- Battery: Two CR2450 lithium batteries power the device.
- Anti-tamper switch slot: Detects unauthorized removal of the sensor.

3. Setup and Installation
The contact sensor must be paired with a compatible Staniot alarm control panel to function. It is not a standalone device.
3.1 Physical Installation
The contact sensor should be installed on the door or window frame, with the magnetic unit on the moving part and the main transmitter unit on the stationary frame, or vice-versa.
- Clean the area on the door and window where the sensor will be installed.
- Apply double-sided tape to the bottom of both sensor units, or secure them with screws using the provided screw holes.
- Install the larger transmitter unit and the smaller magnetic unit separately, ensuring the distance between them is less than 0.7 inches (approximately 1.78 cm) when the door/window is closed.


3.2 Pairing with Staniot Security Panel
The sensor needs to be paired with your Staniot security panel. Refer to your security panel's manual for specific pairing instructions. Generally, the process involves putting the panel into pairing mode and then triggering the sensor.
Video 1: Demonstration of pairing the Staniot contact sensor with a security panel and triggering an alarm.
Once successfully paired, your protected area will be monitored 24/7, and you will receive instant notifications of any attempted break-in.
4. Operating Instructions
Once installed and paired with your Staniot security panel, the contact sensor operates automatically.
- Detection: When a protected door or window is opened, separating the two sensor units, the sensor will detect the change.
- Alarm Trigger: If the security system is armed, the sensor will immediately send an alarm signal to the host panel.
- Notifications: The security panel will then trigger a loud alarm and send instant notifications to your mobile application (if configured).
- Customization: You can customize the name and modes (e.g., Away/Home, Entry/Motion) for the sensor within your security panel settings.

5. Maintenance
5.1 Battery Replacement
The Staniot DS200 sensor is powered by two CR2450 lithium batteries, offering an estimated 5-year lifespan under normal conditions. The sensor features a low battery warning to alert you when replacement is needed.
- When a low battery warning is received from your security panel or mobile app, prepare two new CR2450 batteries.
- Carefully slide the back cover of the main sensor unit in the direction indicated by an arrow (if present) or gently pry it open.
- Remove the old batteries and insert the new CR2450 batteries, ensuring correct polarity.
- Replace the back cover securely.


6. Troubleshooting
- Sensor not triggering alarm:
- Ensure the sensor is correctly paired with your Staniot security panel.
- Verify the gap between the two sensor units is less than 0.7 inches when the door/window is closed.
- Check the battery level. Replace batteries if a low battery warning has been issued.
- Confirm the security panel is armed.
- No APP notifications:
- Ensure your Staniot security panel is connected to the internet (e.g., Wi-Fi).
- Check your mobile application settings for notification permissions.
- Verify the sensor is correctly configured within the security panel to send notifications.
- Sensor not responding:
- Re-pair the sensor with the security panel.
- Replace the batteries.
- Important Note: This is not a Wi-Fi entry sensor. It requires connection to a Staniot security host/panel to function. It cannot operate standalone or connect directly to Wi-Fi for notifications.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | DS200 |
| Brand Name | staniot |
| Battery Specification | CR2450 × 2 (3V Lithium Battery) |
| Battery Life | Approximately 5 years |
| Standby Current | ≤1μA |
| Alarm Current | ≤20mA |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% |
| Wireless Parameters | 433MHz, eV1527 |
| Product Size (Large Unit) | 70 × 31.5 × 15.5 mm |
| Product Size (Small Unit) | 70 × 11 × 13.5 mm |
| Origin | Mainland China |
| Certification | CE, RoHS |
8. User Tips
- For optimal performance, ensure the sensor units are installed with a gap of less than 0.7 inches when the door/window is closed.
- Remember that this sensor is designed to work exclusively with a Staniot Home Security System. It is not a standalone device and does not connect directly to Wi-Fi.
- Regularly check the battery status through your Staniot security panel or mobile app to ensure continuous protection.
- The easy installation allows for flexible placement on various doors and windows throughout your home.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official Staniot website or contact your retailer. Keep your purchase receipt for warranty claims.
A user manual in PDF format is available for download: Staniot Contact Sensor User Manual (PDF).