1. Product Overview
The Retekess TM101 is a wireless intelligent responder system designed for interactive quiz games, classroom competitions, game shows, family parties, and team gatherings. It features a main display unit, multiple answer buttons, and a remote control, offering various answer modes and adjustable settings for an engaging experience.
Video: Retekess TM101 Wireless Intelligent Responder System Overview

Image: The Retekess TM101 system components, including the main display, multiple answer buttons, and remote control.
2. Safety Information
RF Energy Exposure and Product Safety Guide
This radio uses electromagnetic energy in the radio frequency (RF) spectrum. Improper use can cause biological damage. All Retekess radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. Users should be aware of and control their exposure to meet occupational requirements.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by certified technical personnel. Replacement of any transmitter component not authorized by the local government radio management departments could violate regulations.
Avoid Choking Hazard
The product contains small parts. Not suitable for children under 3 years.
Protect Your Hearing
- Use the lowest volume necessary.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
Avoid Burns
Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
Batteries
Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects, as conductive materials can cause short circuits and heat.
Safety Operation
- Do not use charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger; this may result in risk of electrical shock or fire.
- Do not operate the charger if it has been broken or damaged in any way.
- Do not place a portable radio in the area over an air bag or in the air bag deployment area.
- Pull by the plug rather than the cord when disconnecting the charger.
- Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- The adapter shall be installed near the equipment and shall be easily accessible.
- The operating temperature of the EUT can't exceed the specified range.
3. Package Contents
The actual delivery is subject to the option selected by the customer. A typical package may include:
- 1 x Host (Display Unit)
- 1 x Remote Control
- Answer Buttons (quantity varies by package, e.g., 1, 2, 4, 6, 8, 10, or 12 buttons)
- 1 x Power Adapter (for Host)

Image: A single answer button, typically included in various package configurations.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | retekess |
| Model Number | TM101 |
| Origin | Mainland China |
| Certification | CE, FCC |
| Battery Included | Yes (for remote) |
| High-concerned chemical | None |
| Display Power Supply (Input) | AC100-240V |
| Display Power Supply (Output) | DC 9V/1A |
| Display Size | 266*150*20mm |
| Display Weight | 404g |
| Button Size | 100*100*30mm |
| Button Weight | 84g |
| Button Power Supply | 2 x AA battery (not included) |
| Remote Control Size | 105*42*28mm |
| Remote Control Weight | 62g |
| Remote Control Power Supply | 2 x 12V/23A battery (included) |
| Working Distance | About 80m (262ft) |

Image: Detailed specifications for the TM101 Host, Button, and Remote Control.
5. Setup
5.1 Powering the Display and Buttons
- Display Unit (Host): Connect the provided AC adapter to the display unit and plug it into a standard AC100-240V power outlet.
- Answer Buttons: Each button requires 2 x AA batteries (not included). Open the battery compartment on the underside of the button and insert the batteries, ensuring correct polarity.
- Remote Control: The remote control uses 2 x 12V/23A batteries (included).

Image: Powering the display unit via AC adapter and installing AA batteries in an answer button.
5.2 Screen Placement
The display unit is equipped with a detachable stand, allowing for two placement options:
- Desktop Placement: Use the stand to place the display unit on a flat surface.
- Wall Mounting: The stand can be removed, and the display unit can be mounted on a wall using appropriate hardware (not included).

Image: The TM101 display unit can be used on a desktop or mounted on a wall.
5.3 Pairing Buttons (Learning Number - F2)
- Short press the [Function Key] (►) on the display to enter the system menu.
- Navigate to F2 using the [Up ▲/Down ▼] buttons and press [Function Key] again to enter the setting mode. The default flashing display shows "01".
- Set the desired number of buttons (1-32) using the [Up ▲/Down ▼] buttons. Use the [Function Key] to shift the cursor.
- For each button, press and hold the responder button for about 2 seconds until it flashes blue. This indicates it's matching the host code. Upon successful pairing, the responder will flash red.
- After all buttons are paired, press the [Reset button] (●) to exit the setting mode.

Image: The four light colors of the answer buttons indicate their status: white (standby), green (success), blue (start), and red (failure).
5.4 Setting Local ID (F3)
- Short press the [Function Key] to enter the system menu, then navigate to F3 and press [Function Key] again to enter the setting mode. The default flashing display shows "01".
- Set the desired ID (1-15) using the [Up ▲/Down ▼] buttons. Use the [Function Key] to shift the cursor.
- Press the [Reset button] (●) to exit the setting mode.
Note: You need to relearn the number after changing the ID number. Do not change the local ID without special circumstances.
5.5 Setting Communication Channel (F6)
- Press the [Function Key] to enter the system menu, then navigate to F6 and press [Function Key] again to enter the setting mode. The default blinking screen displays the current channel.
- Set the desired channel (0-15) using the [Up ▲/Down ▼] buttons.
- After setting, press the [Reset button] (●) to exit the setting mode.
6. Operation
6.1 Display and Remote Control Buttons Overview
- Display Unit Buttons:
- ▲ (Up button): Navigates up or increases values.
- ▼ (Down button): Navigates down or decreases values.
- ► (Function key / Shift key): Enters menu, confirms selection, or shifts cursor.
- ● (Reset button / Exit button): Resets current state or exits menu.
- Remote Control Buttons:
- Start: Initiates countdown or game round.
- Timing: Activates timing function.
- Reset: Resets the current round or time.

Image: The remote control with Start, Timing, and Reset functions.
6.2 Answer Time Setting (F1)
- Short press the [Function Key] to enter the system menu, navigate to F1, and press [Function Key] again to enter the setting mode. The default flashing time will display the current answering time.
- Set the answer time (1-999 seconds) using the [Up ▲/Down ▼] buttons. Use the [Function Key] to shift the cursor.
- Short press the [Reset button] to exit the setting mode.
- After a successful answer, press the [Timing] button on the remote control. The display will show the specified answer time and start counting down.
Video: Demonstration of setting and using the answer time countdown.
6.3 Answer Modes (F4)
The TM101 offers three answer modes: Normal, Voice, and Elimination.
- Short press the [Function Key] to enter the system menu, then navigate to F4, and press [Function Key] again to enter the setting mode. The default flashing mode displays the current answer mode.
- Set the desired mode (1, 2, or 3) using the [Up ▲/Down ▼] buttons.
- Press the [Reset button] to exit the setting mode.

Image: The three available answer modes: Normal, Voice, and Elimination.
6.3.1 Normal Mode (1)
After pressing the [Start] button, players can directly answer. There is no 3-second countdown reminder, no voice reminder, and no foul judgment.
6.3.2 Voice Mode (2)
Press [Start] to begin a 3-second countdown with a voice reminder. If an answer is given within 3 seconds, it is considered a foul and needs to be restarted.
6.3.3 Elimination Mode (3)
Press [Start] to begin a 3-second countdown with a voice reminder. If an answer is given within 3 seconds, it is considered a foul, but it does not affect other players. The game continues until someone successfully answers, everyone fouls, or the time runs out. The winner's button lights green, foul buttons light red, and losers' buttons do not light up.
6.4 Adjustable Volume
The display unit features 15 levels of adjustable volume. This allows you to precisely control the audio output, suitable for various environments from quiet study sessions to lively parties.

Image: The TM101 offers 15 levels of adjustable volume.
6.5 Wireless Transmission
The system utilizes 2.4G wireless technology, ensuring stable transmission over long distances. The working distance is approximately 80m (262ft).

Image: The TM101 system provides an 80m/262ft wireless transmission range.
6.6 Light Colors Button Functionality
The answer buttons feature four distinct light colors to indicate different statuses:
- White: Standby
- Blue: Start (when a player presses the button to answer)
- Green: Success (correct answer or winner in elimination mode)
- Red: Failure (incorrect answer or foul in elimination mode)

Image: The four light colors of the answer buttons and their corresponding statuses.
6.7 Supported Participants
The TM101 system can support up to 32 participants simultaneously, making it suitable for both small and large group activities.

Image: The TM101 system supports up to 32 participants.
7. Maintenance
7.1 Battery Care
- When the responder is not in use, please turn off the power of the responder through the back switch to extend the battery life.
- Please remove the batteries from the answer buttons and remote control when not in use for a long time to prevent leakage and damage.
8. Troubleshooting
8.1 Button Sensitivity / Channel Issues
If a responder button is not sensitive or not responding, try changing the host channel (F6) to correct it. After changing the host channel, the code responder will flash three lights and automatically match the host channel. If a responder does not match the host, it will automatically enter low-power mode. You may need to manually press the responder to wake it up and re-match the channel.
9. User Tips
- Voice Mode Clarity: In Voice Mode, the system provides audible cues. Ensure the volume is set appropriately for your environment using the 15-level adjustment to clearly hear prompts like "Ready, Go!" and player numbers.
- No Software Required: The TM101 system operates independently without the need for external software, making it easy to set up and use for various activities.
10. Additional Resources
For more detailed instructions and information, please refer to the official user manual PDF: