NEWBOLER EOS640

Contents

NEWBOLER EOS640 Bicycle Front Light User Manual

Model: EOS640

1. Introduction

Thank you for choosing the NEWBOLER EOS640 Bicycle Front Light. This high-performance bicycle light is designed to provide superior illumination for your cycling adventures, featuring a powerful 6000 lumens output, an 8000mAh battery, and a convenient USB charging function. It also doubles as a power bank to charge your mobile devices. Please read this manual carefully before use to ensure proper operation and safety.

NEWBOLER EOS640 Bicycle Front Light

Image: The NEWBOLER EOS640 Bicycle Front Light mounted on a handlebar, illuminating the path ahead.

2. Safety Warnings

  • Always use a 5V/2A charger for the bicycle light. Fast charging is not supported and may damage the battery.
  • Do not look directly into the light beam or shine it into the eyes of others, as this can cause temporary vision impairment or eye damage.
  • The light is rated IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. However, it is not 100% waterproof. Do not soak the light in water or use it for extended periods in heavy rain.
  • If the internal temperature of the light reaches 65°C, the lumen output will automatically decrease. This is a normal protective mechanism to prevent battery damage from overheating.
  • Ensure the light is securely mounted to your bicycle handlebar before riding.

3. Package Contents

Please check the package for the following items:

  • NEWBOLER EOS640 Bicycle Front Light (LIG008-8000mAh)
  • Handlebar Mounts (typically 2 holders are included)
  • USB Charging Cable
  • OTG Connector (for power bank function)

Video: Unboxing and demonstration of the NEWBOLER LIG008 Bicycle Light, showing its components and features.

4. Installation

Follow these steps to install your NEWBOLER EOS640 Bicycle Front Light:

  1. Attach the Mount: Secure the handlebar mount(s) to your bicycle handlebar. The mount is adjustable to fit handlebars with a diameter between 22.2mm and 33mm. Use the screw to tighten the mount firmly.
  2. Slide in the Light: Slide the bicycle light onto the installed mount until it clicks securely into place. Ensure the light is facing forward and is horizontally aligned.
  3. Adjust Angle: Adjust the angle of the light to ensure optimal visibility without dazzling oncoming traffic.
Bracket installation steps

Image: Step-by-step visual guide for attaching the light to the bicycle handlebar using the provided bracket.

New holder B installation display

Image: Demonstration of the 'new holder B' installation, showing how the light can be adjusted and a bicycle computer can be installed.

5. Operating Instructions

The EOS640 Bicycle Front Light features multiple lighting modes for various riding conditions:

  • Power On/Off: Press the power button to turn the light on or off.
  • Mode Switching: While the light is on, press the power button repeatedly to cycle through the following modes:
    • Near Light (1000 Lumens, approx. 7.5 hours runtime)
    • High Beam Bright (5000 Lumens, approx. 3 hours runtime)
    • Far and Near Full Light (6000 Lumens, approx. 2 hours runtime)
    • Flashing
Max 6000 Lumens Brightness comparison

Image: Visual comparison of different brightness levels: High Beam (1000 Lumens), Low Beam (5000 Lumens), and High Light (6000 Lumens) with their approximate runtimes.

Anti-Glare Feature

The light is designed with a cut-off line to prevent dazzling oncoming pedestrians and drivers, enhancing safety for everyone on the road.

Anti-glare Bicycle light with cut-off line design

Image: Illustration of the anti-glare design, showing a clear cut-off line to avoid blinding others.

6. Charging and Power Bank Function

Charging the Light

To charge the bicycle light:

  1. Connect the provided USB charging cable to the light's Type-C interface.
  2. Connect the other end of the cable to a 5V/2A USB power adapter (not included).
  3. The indicator lights will show the charging status: flashing blue for low battery/charging, and solid blue when fully charged.

Charging time for the 8000mAh battery is approximately 9 hours.

USB Charging with indicator lights

Image: Close-up of the light's rear, showing the USB Type-C charging port and blue indicator lights for battery status.

Power Bank Function

The EOS640 can also function as a power bank to charge your mobile devices:

  1. Use the provided OTG connector and your device's charging cable.
  2. Connect the OTG connector to the light's USB output port.
  3. Connect your device's charging cable to the OTG connector and then to your device.

The light provides a 5V/1A output for charging.

8000mAh Power Bank function, charging a phone

Image: The bicycle light acting as an 8000mAh power bank, charging a smartphone via its USB output and an OTG connector.

7. Maintenance

  • Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to about 50% every 3-6 months to prolong its lifespan.
  • Water Exposure: While IPX5 rated, avoid prolonged exposure to heavy rain or submersion in water. If the light gets wet, dry it thoroughly before charging or using.
IPX5 Waterproof feature, showing light in rain

Image: The bicycle light being exposed to water, demonstrating its IPX5 waterproof rating. Note: Avoid prolonged exposure to heavy rain.

8. Troubleshooting

  • Light not turning on: Ensure the battery is charged. If not, connect it to a 5V/2A charger.
  • Light output decreases during use: This is a normal protective feature. If the internal temperature reaches 65°C, the lumen output will automatically reduce to prevent battery damage. Allow the light to cool down.
  • Charging issues: Ensure you are using a 5V/2A charger. Fast chargers are not compatible and may prevent proper charging or damage the device. Check the USB cable for damage.
  • Light feels hot: High-lumen lights generate heat. The aluminum alloy body is designed for good heat dissipation. If the temperature exceeds 65°C, the light will automatically reduce output.

9. Specifications

NEWBOLER EOS640 (LIG008-8000mAh) Bicycle Front Light
Feature Specification
Model Number EOS640 (LIG008-8000mAh)
Lumens Max 6000 Lumen
Battery Capacity 8000 mAh
Waterproof Level IPX5
Body Material Aluminum alloy
Mounting Placement Handlebar (22.2~33mm diameter)
LED Type P9*5
Charging Time Approx. 9 hours
Working Time 2.5 - 7.5 hours (depending on mode)
Voltage 5V/2A
Power Bank Function Yes (5V/1A output)
Lighting Modes 4 Modes (Near light, High beam bright, Far and Near full light, Flashing)
Weight 393g
Size 164*45*38mm

Image: A table summarizing the key specifications of the NEWBOLER LIG008-6000LM bicycle light.

10. User Tips

  • Charging Indicator: When charging, the blue indicator lights will flash. Once fully charged, all blue lights will remain solid.
  • Handlebar Fit: The included mounts are designed for handlebars with a diameter between 22.2mm and 33mm. If your handlebar is 35mm or larger, you may need to purchase a compatible mount separately.
  • Heat Management: It's normal for the light to generate heat during high-lumen operation. The automatic lumen reduction feature protects the battery. If you notice excessive heat, consider using a lower brightness mode.

11. Warranty and Support

For warranty claims or technical support, please contact NEWBOLER Official Store directly through your purchase platform. Keep your proof of purchase for any warranty-related inquiries.

© 2024 NEWBOLER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.