1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your DUMBORC X6 6CH 2.4G RC Radio Controller Transmitter, P6DC Receiver, and DC LED Set. Please read this manual thoroughly before use to ensure proper setup and to maximize your enjoyment of the product.
2. Safety Information
- Always operate your RC vehicle in a safe and open area, away from people, pets, and obstacles.
- Keep the transmitter and receiver away from water and moisture to prevent damage.
- Avoid exposing the product to high temperatures or direct sunlight for extended periods.
- Ensure all connections are secure before operation.
- Remove batteries from the transmitter if not in use for a long time.
- This product is recommended for users aged 14 and above.
3. Package Contents
Verify that all items are present in your package:
- 1 x DUMBORC X6P 6CH 2.4G RC Radio Controller Transmitter
- 1 x DUMBORC P6DC Receiver
- 1 x DC LED Light Set (12 LED bulbs: 2 yellow, 1 blue, 1 red, 2 white; 6 lamp wires, 12 lamp beads)
4. Product Overview
4.1. Transmitter (X6P)
The X6P is a 6-channel 2.4G radio controller featuring FHSS (Frequency-Hopping Spread Spectrum) technology across 67 channels, providing high resistance to interference. It offers smooth and highly sensitive control, maintaining stability at distances of 400-500 meters. It is compatible with various RC vehicles including cars, boats, and tanks. The transmitter includes brake and fail-safe functions for out-of-control protection. Channels 5 (CH5) and 6 (CH6) are push-button operated, each with an LED indicator for activation status.
4.2. Receiver (P6DC)
The P6DC receiver is designed to work seamlessly with the X6P transmitter. It supports high voltage servos and has a dedicated 'BIND' button for pairing.
4.3. DC LED Light Set
This set includes 12 LED bulbs designed to provide realistic lighting for your RC vehicle, mimicking real car lamps.
5. Setup
5.1. Transmitter Battery Installation
The X6P transmitter requires 4x AA batteries (not included).
- Open the battery compartment cover located at the bottom of the transmitter.
- Insert 4 AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
5.2. Receiver Connection
Connect the P6DC receiver to your RC vehicle's electronic components:
- Connect your Electronic Speed Controller (ESC) to Channel 2 (CH2) for throttle control.
- Connect your steering servo to Channel 1 (CH1).
- Connect other servos or accessories to Channels 3, 4, 5, and 6 as needed.
- Ensure correct polarity for all connections.
5.3. Binding Procedure
To establish communication between the transmitter and receiver:
- Ensure both the X6P transmitter and P6DC receiver are powered off.
- Connect the receiver to power (e.g., via the ESC).
- Press and hold the 'BIND' button on the P6DC receiver.
- While holding the 'BIND' button, power on the X6P transmitter.
- Observe the LED indicator on the receiver. Once it changes from flashing to solid (or as indicated by the receiver's specific binding sequence), release the 'BIND' button.
- Power cycle both the transmitter and receiver. The receiver's LED should now be solid, indicating a successful bind.
- Test all controls to ensure proper functionality.
5.4. LED Light Installation
Connect the DC LED Light Set to the appropriate channels on your P6DC receiver or a dedicated LED controller if available. The LED set includes 6 lamp wires with 12 lamp beads, with a total length of 410mm per wire. The headlights are 5mm in diameter, and the remaining lights are 3mm.
6. Operating Instructions
6.1. Basic Controls
- Steering Wheel: Controls the direction of your RC vehicle (left/right).
- Throttle Trigger: Pull to accelerate forward, push to brake/reverse.
6.2. Advanced Features
- CH5 (Push-Button): Pressing CH5 will turn the rudder to the left. Pressing it again will return the rudder to the center position. An LED indicator on the transmitter will show if CH5 is activated.
- CH6 (Push-Button): Similar to CH5, pressing CH6 will turn the other rudder to the right. Pressing it again will return it to the center. An LED indicator will confirm activation.
- Throttle Speed Limit: The transmitter features a unique throttle speed limit adjustment function, ideal for beginners to practice at a safe and controlled speed. Refer to the transmitter's specific controls for adjusting this limit.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the transmitter and receiver. Do not use solvents or harsh chemicals.
- Storage: Store the product in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: Always remove batteries from the transmitter if it will not be used for an extended period to prevent leakage and damage.
- Inspection: Regularly inspect all wires, connectors, and the casing for any signs of wear, damage, or loose connections.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Transmitter does not power on | Dead or incorrectly installed AA batteries | Replace batteries with fresh ones, ensuring correct polarity. |
| No control or intermittent control | Not bound, out of range, interference | Perform binding procedure again. Ensure operation within 400-500m range. Avoid areas with strong radio interference. |
| LED lights not working | Incorrect connection, damaged LED, insufficient power | Check all connections to the receiver/LED controller for correct polarity and secure fit. Inspect LEDs for visible damage. |
| Low voltage warning on transmitter | Transmitter battery voltage is low | Replace or recharge transmitter batteries. The warning activates at 7.4V (for 2S LiPo) or 4.8V (for 4x AA). |
9. Specifications
9.1. Transmitter (X6P)
- Item Brand: DumboRC
- Item Number: X6P
- Material: Plastic and metal
- Color: Silver grey
- Product Size: 160 x 100 x 205mm
- Battery: 4x AA (not included)
- Channel: 6CH
- Fit For: RC Car, Boat, Tank Model
- Modulation Mode: GFSK
- Spreading Mode: FHSS 67 channel pseudo-random frequency hopping
- Control Distance: 400-500 meters
- Remote Control Voltage Range: 4.8-12V (supports 1S-3S)
- Remote Control Working Current: 80-120mA
- Data Resolution: 4096 levels, 0.5us per level
- Voltage Alarm: 7.4V / 4.8V
- Transmission Frequency: 2.4GHz ISM band (2400MHz~2483.5MHz)
- Support Receiver: P6DC
9.2. Receiver (P6DC)
- Item Number: P6DC
- Receiver Size: 35 x 20 x 13mm
- Receiver Voltage Range: 3.3-10V
- Receiver Operating Current: 30mA
- RF Power: <20dbm
- Features: Supports high voltage servos
9.3. DC LED Light Set
- Brand: DUMBORC
- Item Name: DC Normal LED set
- Material: Plastics
- Number of LED bulbs: 12
- Lights and Colors: 2x Yellow, 1x Blue, 1x Red, 2x White
- Lamp Bead Diameter: 5mm for 2 headlights, 3mm for the rest
- Wiring: 6 lamp wires and 12 lamp beads, total length of each wire: 410mm
10. User Tips
- Battery Choice: For optimal performance and to avoid low voltage warnings, ensure your transmitter batteries (4x AA) are fresh or use a compatible 1S-3S LiPo battery within the 4.8V-12V range.
- Channel 5 & 6 Usage: Remember that CH5 and CH6 are momentary push-buttons. A single press activates the function (e.g., rudder movement), and a second press returns it to the neutral position. The LED indicators on the transmitter help confirm their active state.
11. Certifications
This product has passed the certification of CE and ROHS. The manufacturer's quality management system is ISO 9001 certified, ensuring high standards in design and manufacturing.
12. Warranty & Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.