1. Introduction
The Navceker 4K 60Hz HDMI DisplayPort KVM Switch is designed to enhance productivity by allowing you to control two computers (PC, laptop, game console) using a single set of peripherals: one USB keyboard, one USB mouse, one HDMI monitor, and one DisplayPort monitor. This device facilitates seamless switching between two computers, eliminating the need for multiple keyboards, mice, and monitors.
This manual covers two models: ZY-AHDK2 (Black) and ZY-AK3 (White). While both offer core KVM functionality, they have slight differences in USB versions and switching methods:
- ZY-AHDK2 (Black): Features DisplayPort 1.2 / HDMI 2.0 and HDCP 2.2, supports 4K@60Hz, 2K@144Hz, 1080@165Hz. Includes USB 2.0 ports and supports one-button switching and an external extend switch.
- ZY-AK3 (White): Features HDMI 2.0b and HDCP 2.2, supports 4K@60Hz, 2K@120Hz, 1080@144Hz. Includes USB 3.0 ports and supports one-button switching, hotkey control, and IR remote control.
2. Key Features
- Dual Monitor Support: Control 2 computers with one HDMI and one DisplayPort monitor.
- High Resolution: Supports up to 4K@60Hz, 2K@144Hz/120Hz, 1080P@165Hz/144Hz.
- Video Standards: Compatible with HDMI 2.0b (ZY-AK3) / HDMI 2.0 (ZY-AHDK2) and DisplayPort 1.2 (ZY-AHDK2), HDCP 2.2.
- USB Hub: Integrated USB 2.0 (ZY-AHDK2) or USB 3.0 (ZY-AK3) ports for sharing USB devices like scanners, printers, U-disks, etc.
- Advanced K&M Compatibility: Supports keyboard and mouse pass-through mode (Semi-DDM USB) for near-zero latency and extended functionality.
- Audio Support: 3.5mm audio jack for 2.0CH PCM audio extraction to sound systems and microphone input.
- Display Modes: Supports both Mirror Mode (duplicate display) and Extended Mode (different images on each monitor).
- Multiple Switching Methods: Front panel button switch, hotkey control (ZY-AK3), IR remote control (ZY-AK3), or external switch (ZY-AHDK2).
- Plug and Play: No driver installation required.
- Wide Compatibility: Adaptive EDID, compatible with Windows, macOS, Linux, UNIX.
- Durable Design: Aluminum alloy shell for anti-rust, anti-corrosion, and anti-interference.
- Safety: Built-in ESD electrostatic protection circuit.
3. Package Contents
Please check the box for the following items:
- 1 x Navceker HDMI DisplayPort KVM USB Switch (ZY-AHDK2 or ZY-AK3)
- 2 x USB Data Cables
- 1 x USB Power Cable
- 1 x External Switch Control (for ZY-AHDK2 model)
- 1 x User Manual

4. Setup and Connections
Follow these steps to connect your KVM switch:
- Power Connection: Connect the provided USB power cable to the KVM switch's DC 5V port and a suitable power source.
- Monitor Connections: Connect your HDMI monitor to the KVM's HDMI OUT port and your DisplayPort monitor to the KVM's DP OUT port.
- Computer 1 (PC1) Connection:
- Connect PC1's HDMI output to the KVM's HDMI IN1 port.
- Connect PC1's DisplayPort output to the KVM's DP IN1 port.
- Connect one of the provided USB data cables from PC1's USB port to the KVM's USB IN1 port.
- Computer 2 (PC2) Connection:
- Connect PC2's HDMI output to the KVM's HDMI IN2 port.
- Connect PC2's DisplayPort output to the KVM's DP IN2 port.
- Connect the second USB data cable from PC2's USB port to the KVM's USB IN2 port.
- Peripheral Connections: Connect your USB keyboard, USB mouse, and any other USB devices (e.g., U-disk, printer) to the KVM's USB OUT ports.
- Audio Connections: Connect your headphones to the 3.5mm Audio Out jack and your microphone to the 3.5mm Mic In jack on the KVM switch.
- External Switch (ZY-AHDK2 only): Connect the external switch control cable to the dedicated port on the KVM unit.
Important Note:
- To achieve dual monitor display, each computer/laptop requires two video connections (one HDMI, one DisplayPort) to the KVM switch.
- Ensure that HDMI IN1, DP IN1, and USB IN1 are connected to PC1, and HDMI IN2, DP IN2, and USB IN2 are connected to PC2. Mixed insertion is not supported.
- If your computer only has one HDMI interface, you may need a converter or conversion cable (e.g., VGA/DVI/DP to HDMI) for the second video input.
- Reliable adapters for DVI, VGA, DisplayPort (DP), or USB Type-C video outputs are needed but not included. Please ensure you have the necessary adapters for your setup.




5. Operating Instructions
5.1 Switching Between Computers
You can switch between the connected computers using several methods:
- Front Panel Button Switch: Press the 'SWITCH' button on the front panel of the KVM unit to cycle between PC1 and PC2.
- External Switch Control (ZY-AHDK2 only): Use the provided external switch button to switch between computers.
- Hotkey Switch (ZY-AK3 only): Use keyboard hotkeys for quick switching:
- Press
Ctrl + Shift + 1to switch to PC1. - Press
Ctrl + Shift + 2to switch to PC2. - Alternatively, press
Ctrl + Ctrlto cycle between PC1 and PC2.
- Press
- IR Remote Control (ZY-AK3 only): Use the IR remote control to switch between computers.


5.2 Display Modes
The KVM switch supports both extended and duplicated display modes, depending on your computer's settings.
- Extended Mode: Allows one PC to display two different images across the two connected monitors. Your PC must support extended mode for this functionality.
- Mirror Mode: Allows one PC to display the same image on both connected monitors.


6. Troubleshooting
If you encounter issues, please refer to the following common problems and solutions:
- No Display on Monitors:
- Ensure all HDMI and DisplayPort cables are securely connected to both the KVM switch and your computers/monitors.
- Verify that the KVM switch is powered on.
- Confirm that each computer has two video outputs (one HDMI, one DisplayPort) connected to the KVM for dual monitor functionality.
- Check if your computer's display settings are configured for extended or duplicated display.
- Keyboard/Mouse Not Responding:
- Ensure the USB data cables from your computers are correctly connected to the KVM's USB IN ports (USB IN1 for PC1, USB IN2 for PC2).
- Connect your keyboard and mouse directly to the KVM's dedicated USB OUT ports.
- Standard 104-key wired USB keyboards and standard 2 or 3-button wired USB mice are recommended. Wireless or mechanical keyboards/mice may not be fully supported.
- Avoid using external USB hubs with the KVM switch.
- Audio Issues:
- Check all 3.5mm audio connections.
- Ensure your computer's audio output is set to the KVM switch.
- Incorrect Display Mode (Mirror/Extend):
- Adjust the display settings on your computer (Windows Display Settings, macOS System Preferences) to select the desired mode.
- Ensure your PC supports extended mode if you wish to use it.
- General Instability:
- Power cycle the KVM switch and all connected computers.
- Ensure all cables are of good quality and securely connected.
7. Specifications
| Feature | Description |
|---|---|
| Product Type | HDMI DisplayPort USB KVM Switch (2 In 2 Out) |
| Input Ports (ZY-AHDK2) | 2x HDMI 2.0, 2x DisplayPort 1.2, 2x USB 2.0 (Type-B), 3x USB 2.0 (Type-A), 1x MIC |
| Input Ports (ZY-AK3) | 2x HDMI 2.0b, 2x USB 3.0 (Type-B), 3x USB 3.0 (Type-A), 1x MIC |
| Output Ports | 1x HDMI 2.0, 1x DisplayPort 1.2, 1x L/R Audio (3.5mm) |
| Max Resolution (ZY-AHDK2) | 4K@60Hz, 2K@144Hz, 1080P@165Hz (RGB 4:4:4) |
| Max Resolution (ZY-AK3) | 4K@60Hz, 2K@120Hz, 1080P@144Hz (RGB 8:8:8, 7.1CH Dolby Atmos) |
| HDCP Support | HDCP 2.2 |
| Audio Output | 3.5mm headphone jack (2.0CH PCM audio) |
| Microphone Input | 3.5mm jack |
| Switching Methods | Front panel button, External switch (ZY-AHDK2), Hotkey (ZY-AK3), IR Remote (ZY-AK3) |
| Material | Aluminum Alloy shell |
| Dimensions | 111.8 x 63.2 x 24.5 mm |
| ESD Protection | Built-in electrostatic protection circuit |
| OS Compatibility | Windows, macOS, Linux, UNIX |
8. User Tips
- For optimal performance, always use high-quality HDMI and DisplayPort cables.
- If you experience any display or peripheral issues, try power cycling the KVM switch and the connected computers.
- Ensure your computer's graphics drivers are up to date to support the desired resolutions and display modes.
9. Warranty and Support
Navceker ensures long-term satisfaction with your purchase. For any issues or questions regarding your KVM switch, please contact customer service. We are committed to providing friendly and easy-to-reach support to resolve your problems timely.