Tuya GM25TEQ 1.1N

Contents

Tuya GM25TEQ 1.1N Wifi Rolling Smart Tubular Motor Instruction Manual

Model: GM25TEQ 1.1N

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya GM25TEQ 1.1N Wifi Rolling Smart Tubular Motor. This motor is designed for use with 38mm diameter tubes, commonly found in smart blinds and shades, offering control via Wi-Fi (Tuya/Smart Life App), voice commands (Alexa, Google Home), and an optional RF433 remote control.

Safety Information

  • Ensure all electrical connections are made by a qualified professional.
  • Disconnect power before performing any installation, maintenance, or troubleshooting.
  • Keep hands and loose clothing clear of moving parts during operation.
  • This device is for indoor use only.
  • Do not expose the motor to moisture or extreme temperatures.

Package Contents

Verify that all components are present before beginning installation:

  • Tuya GM25TEQ 1.1N Wifi Rolling Smart Tubular Motor
  • Mounting Brackets (if included with your specific purchase, check SKU)
  • Instruction Manual
  • (Optional) RF433 Remote Controller (if purchased separately)

Specifications

Close-up of the GM25TEQ 1.1N motor label showing electrical specifications.

Figure 1: Motor Label with Specifications

Diagram showing the motor with power cable, P1 setting key, signal receiving line, and overall length of 453mm.

Figure 2: Motor Dimensions and Key Components

Technical Specifications - GM25TEQ 1.1N
FeatureSpecification
Model NumberGM25TEQ 1.1N
Rated Torque1.1 Nm
Rolling Speed34 r/min
Working VoltageAC 100-240V, 50/60 Hz
Current0.1 A
Power12 W
Motor DiameterΦ25 mm (for 38mm tube)
Protection RatingIP44
FunctionWi-Fi Control, Electronic Stroke Memory
Built-in ReceiverYes (RF433)
Supported RemoteDooya 433MHz remote controller
Supported APPTuya / Smart Life APP
Voice ControlAlexa, Google Home
Motor Length453 mm
Motor Weight380 g
Package Dimensions (L x W x H)52 cm x 18 cm x 12 cm
Package Weight0.7 kg

Setup and Installation

1. Mechanical Installation

  1. Ensure the blind tube has an inner diameter suitable for a 25mm motor (typically a 38mm outer diameter tube).
  2. Insert the tubular motor into the blind tube. Ensure it fits securely.
  3. Mount the blind assembly with the motor into your window frame using appropriate brackets.

2. Electrical Wiring

WARNING: Electrical wiring should only be performed by a qualified electrician. Ensure power is disconnected before wiring.

Motor end with power cable (blue, brown wires) and signal receiving line.

Figure 3: Motor Wiring Connections

  • Connect the motor's power cable (typically brown and blue wires) to your AC 100-240V power supply.
  • The white thin wire is the signal receiving line for RF433 communication. Ensure it is not obstructed.

3. App Pairing (Tuya/Smart Life)

  1. Download the Tuya Smart or Smart Life app from your smartphone's app store.
  2. Register or log in to your account.
  3. Power on the motor. The motor should enter pairing mode (refer to app instructions for specific pairing steps, usually involving a reset or power cycle).
  4. In the app, tap '+' to add a new device. Select "Curtain Motor" or "Shade Motor" from the device list.
  5. Follow the on-screen instructions to connect the motor to your Wi-Fi network.
  6. Once connected, you can rename the device and assign it to a room.

4. Setting Upper and Lower Limits (Electronic Stroke Memory)

The motor features electronic stroke memory. Use the P1 setting key (refer to Figure 2 and 3) or the app to set the desired upper and lower limits for your blinds. Consult the Tuya Smart/Smart Life app's specific motor settings for detailed instructions on limit calibration.

5. RF433 Remote Control Pairing (Optional)

If you have a Dooya 433MHz remote controller (purchased separately), follow these steps to pair it:

Image showing the tubular motor and a Dooya 433MHz remote controller.

Figure 4: Motor with Dooya RF433 Remote Controller

  1. Ensure the motor is powered on.
  2. Press and hold the P1 setting key on the motor (or follow the remote's pairing instructions, which often involve pressing a button on the motor and then a button on the remote).
  3. Refer to your Dooya remote controller's manual for precise pairing instructions, as procedures may vary slightly between models (e.g., DC1650, DC2700).

Operating Instructions

1. Via Tuya/Smart Life App

Mobile app interface showing blind control with open percentages (75%, 50%, 25%).

Figure 5: App Control Interface for Blinds

  • Open the Tuya Smart or Smart Life app.
  • Select your motor from the device list.
  • Use the app interface to open, close, or set the blinds to a specific percentage (e.g., 75%, 50%, 25% open).
  • You can also set schedules, timers, and create smart scenes within the app.

2. Via RF433 Remote Control (Optional)

Diagram illustrating control via remote and mobile app, showing UPWARD, PAUSE, DOWN functions.

Figure 6: Remote and App Control Overview

  • Use the UP button to open the blinds.
  • Use the DOWN button to close the blinds.
  • Use the PAUSE/STOP button to stop the blinds at any desired position.

3. Via Voice Control (Alexa/Google Home)

  • Ensure your Tuya/Smart Life account is linked to your Alexa or Google Home app.
  • Use voice commands such as:
    • "Alexa, open [Blind Name]"
    • "Hey Google, close [Blind Name]"
    • "Alexa, set [Blind Name] to 50%"

Maintenance

  • Cleaning: Wipe the motor and exposed parts with a dry, soft cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the power cable and signal receiving line for any signs of damage. Ensure all mounting points are secure.
  • Software Updates: Keep the Tuya Smart/Smart Life app updated to ensure optimal performance and access to new features.

Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Motor not responding to app/remote.No power, Wi-Fi disconnected, remote not paired, motor in sleep mode.Check power supply. Verify Wi-Fi connection in app. Re-pair remote if necessary. Power cycle the motor.
Blinds not moving to correct positions.Limits not set or incorrectly set.Recalibrate the upper and lower limits using the app or P1 setting key.
Voice control not working.App not linked to Alexa/Google Home, incorrect device name, internet issue.Ensure Tuya/Smart Life is linked to your voice assistant. Check device name. Verify internet connection.
Motor making unusual noises.Obstruction in the blind mechanism, motor malfunction.Inspect the blind for obstructions. If noise persists, contact support.

User Tips

  • Strong Wi-Fi Signal: Ensure the motor is within good range of your Wi-Fi router for reliable smart control.
  • Regular Calibration: If you notice the blinds are slightly off their set positions over time, a quick recalibration of the limits can resolve this.
  • Group Control: For multiple smart blinds, use the Tuya/Smart Life app to create groups for simultaneous control.
  • Scene Automation: Leverage the app's automation features to link your blinds with other smart home devices or set them to operate based on time, weather, or other triggers.

Warranty and Support

This product comes with a 1-Year Manufacturer's Limited Warranty for defective items, excluding items damaged or misused after receipt. Accessories are covered by a 3-month warranty.

For warranty claims or technical support, please contact your retailer or the manufacturer directly, providing your order number and a detailed description of the issue.

© 2023 Tuya. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.