1. Introduction
Thank you for choosing the XCLEA P10 Cordless Vacuum Cleaner. This integrated wireless vacuum cleaner features antibacterial suction and mopping capabilities, designed to provide efficient and thorough cleaning for your home. This manual provides important information on safety, setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture (for electrical products).
- Handle with care to avoid cuts or injuries (for sharp/dangerous items).
3. Package Contents
Please check the package for the following items:
- XCLEA P10 Main Unit
- Extension Wand
- Soft Velvet Roller Brush
- Mop Cloth (QYXCCQTB01)
- Front HEPA Filter (QYXCQCBLX01)
- Rear Filter (QYXCQCBLX01)
- Pet Brush Attachment (QYXCQCBS01)
- Crevice Tool
- 2-in-1 Brush Tool
- Charging Dock / Storage Rack
- Power Adapter
- User Manual (this document)
Figure 3.1: XCLEA P10 Vacuum Cleaner and included accessories.
4. Product Overview
Familiarize yourself with the main components of your XCLEA P10 vacuum cleaner.
Figure 4.1: XCLEA P10 Main Unit.
Figure 4.2: XCLEA P10 Storage Rack with integrated storage for accessories and charging. Features include better material (anti-corrosion, anti-rust), stable standing, punch-free design, multiple storage positions (8-in-one), and high-quality wear-resistant rollers.
Figure 4.3: Detailed view of the storage rack, showing layered storage for various accessories including wall mount, hose, short suction nozzle, brush head/water tank, and long suction nozzle storage.
5. Assembly and Initial Setup
5.1 Before First Use
Remove all protective films from the device and its accessories before initial use.
5.2 Assembling the Vacuum Cleaner
- Attach the extension wand to the main unit until it clicks into place.
- Select the desired cleaning head (e.g., Soft Velvet Roller Brush for floors) and attach it to the end of the extension wand.
- For mopping, ensure the mop cloth is attached to the water tank assembly, then attach it to the main cleaning head.
5.3 Setting up the Storage Rack and Charging
- Place the storage rack on a flat, stable surface.
- Connect the power adapter to the charging port on the storage rack and plug it into a wall outlet.
- Dock the vacuum cleaner onto the storage rack. It will magnetically attach and begin charging. The display on the vacuum cleaner will indicate charging status.
Figure 5.1: The storage rack provides embedded storage for accessories and a convenient magnetic charging dock, keeping cables tidy.
6. Operation
6.1 Basic Operation
- Press the power button to turn on the vacuum cleaner.
- Select the desired power mode (e.g., Eco, Standard, Max) using the mode selection button.
- Begin vacuuming. The powerful suction (120,000 RPM motor) effectively picks up dust and debris from various surfaces, including carpets.
6.2 Using Attachments
The XCLEA P10 comes with multiple brush heads for different cleaning needs:
- Soft Velvet Roller Brush (QYXCRGS01): Ideal for hard floors and low-pile carpets. Features ionic antibacterial properties and nano-level waterproof fibers for deep cleaning and preventing hair entanglement.
- Pet Brush (QYXCQCBS01): Designed for grooming pets and removing pet hair from upholstery. It features a soft PET comb and an automatic hair brush-out function for easy cleaning.
- Crevice Tool: For narrow gaps and corners.
- 2-in-1 Brush Tool: For delicate surfaces, keyboards, and intricate items.
Figure 6.1: The Pet Brush attachment with its soft comb and flexible hose for grooming and cleaning.
Figure 6.2: Demonstration of the Pet Brush in use.
6.3 Mopping Function
The XCLEA P10 can vacuum and mop simultaneously. The mop cloth (QYXCCQTB01) is made of superfine fiber for uniform deep cleaning.
- Fill the water tank with clean water.
- Attach the mop cloth to the water tank assembly.
- Attach the water tank assembly to the main cleaning head.
- Adjust the water output level as needed. The floor will dry quickly after mopping.
Figure 6.3: The superfine fiber mop cloth designed for deep cleaning.
6.4 Product Demonstration Video
Watch this video for a visual guide on the XCLEA P10's features and operation:
Video 6.1: A demonstration of the XCLEA P10 vacuum cleaner's features, including vacuuming, mopping, self-cleaning of the mop, magnetic charging, and various attachments for different cleaning tasks.
7. Maintenance
7.1 Emptying the Dust Cup
When the dust cup is full, empty it to maintain optimal suction performance. The visual display will indicate when the dust cup needs attention.
7.2 Cleaning and Replacing Filters
The XCLEA P10 features both front HEPA and rear filters for efficient air purification. The HiLink smart linkage system provides real-time updates on filter usage and replacement reminders.
- Front HEPA Filter (QYXCQCBLX01): This filter is washable and reusable. It can be cleaned in two ways: by gently tapping to remove dust or by rinsing with water. Ensure it is completely dry before re-installing.
- Rear Filter (QYXCQCBLX01): This filter also includes a built-in cleaning brush for easier maintenance.
Figure 7.1: The front high-efficiency HEPA filter, designed to filter tiny dust and harmful particles. It is washable and reusable.
Figure 7.2: The antibacterial rear filter with a built-in cleaning brush for easy maintenance.
7.3 Cleaning the Mop Cloth
After mopping, the mop cloth can be automatically cleaned and spun dry by placing the vacuum cleaner back into its cleaning bucket/station. This eliminates the need for manual washing.
7.4 Cleaning Roller Brushes
Regularly check the roller brushes for tangled hair or debris. The Soft Velvet Roller Brush is designed to prevent hair entanglement, but occasional cleaning may still be necessary.
8. Troubleshooting
If you encounter issues, the visual color screen on the vacuum cleaner will provide prompts for common problems such as:
- Filter replacement needed
- Dust cup full
- Charging issues
- Blocked metal pipe
- Operation errors
Refer to the on-screen prompts for specific instructions. If the issue persists, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | XCLEA P10 |
| Type | Vacuum Cleaner Parts (Accessories) |
| Material | Silicone (for some parts) |
| Vacuum Part Type | Mop Cloths |
| High-concerned chemical | None |
| Origin | Mainland China |
| Storage Rack Dimensions | 116 x 38 x 22 cm (Height x Width x Depth) |
| Storage Rack Weight | 3.5 kg |
| Front HEPA Filter Model | QYXCQCBLX01 |
| Front HEPA Filter Size | 84.2 x 24.5 mm |
| Front HEPA Filter Weight | 19g |
| Rear Filter Model | QYXCQCBLX01 |
| Rear Filter Size | 87 x 37 mm |
| Rear Filter Weight | 21g |
| Mop Cloth Model | QYXCCQTB01 |
| Mop Cloth Size | 253 x 56 mm |
| Pet Brush Model | QYXCQCBS01 |
| Pet Brush Size | 170 x 95 mm |
| Pet Brush Weight | 359g |
| Soft Velvet Roller Brush Model | QYXCRGS01 |
| Soft Velvet Roller Brush Size | 235 x 48 mm |
| Soft Velvet Roller Brush Weight | 150g |
10. User Tips
- For best mopping results, ensure the mop cloth is damp but not soaking wet. Adjust the water output as needed for different floor types.
- Regularly check and clean the roller brushes, especially if you have pets, to prevent hair entanglement and maintain cleaning efficiency.
- Utilize the various attachments for specialized cleaning tasks to maximize the versatility of your XCLEA P10.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer. Keep your purchase receipt as proof of purchase.
Manufacturer & EU Representative Information:
- Manufacturer: Dreame Trading (Tianjin) Co.,Ltd.
- Manufacturer Address: No.1688 Songwei Road, Guoxiang Street, Wuzhong Economic Development Zone, Suzhou, China, 751100
- Manufacturer Phone: 86-051267074287
- Manufacturer Email: admin@dreami.tech
- EU Responsible Person: La nuit lighting SARL
- EU Country: France
- EU Address: 253 RUE SAINT HONORE Isere Auvergne-Rhone-Alpes
- EU Phone: 33-769779007
- EU Email: yldyx112@outlook.com
A user manual in PDF format is available for download: XCLEA P10 User Manual (PDF)