Tribit MaxSound Plus

Tribit MaxSound Plus Portable Wireless Bluetooth Speaker Instruction Manual

Model: MaxSound Plus

Brand: Tribit

Introduction

Thank you for choosing the Tribit MaxSound Plus Portable Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read it thoroughly before use.

Package Contents

1x MaxSound Plus Speaker
1x USB Micro-B Charging Cable (Note: Some models may include a Type-C cable)
1x AUX Cable
1x User Manual

Product Overview

The Tribit MaxSound Plus is a portable wireless Bluetooth speaker. This section will help you identify the various parts and controls of your speaker.

Speaker Components:

Front view of Tribit MaxSound Plus speaker

Figure 1: Front view of the Tribit MaxSound Plus speaker, showing the speaker grille and Tribit logo.

Top view of Tribit MaxSound Plus speaker showing control buttons

Figure 2: Top control panel. From left to right: Power button, Bluetooth button, Play/Pause button, Volume Down button, Volume Up button, XBass button.

Rear view of Tribit MaxSound Plus speaker showing charging and AUX ports

Figure 3: Rear panel. Under the protective flap, you will find the AUX input port and the charging port (either Micro-B or Type-C).

Video 1: A visual guide to the speaker's physical features, including the location of ports and the function of each button.

Setup Guide

1. Charging the Speaker

Before first use, fully charge your speaker. The charging port is located on the rear panel, protected by a rubber flap.

Connect the provided USB charging cable to the speaker's charging port (Micro-B or Type-C, depending on your model).
Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
The charging indicator light will show the charging status. A full charge takes approximately 4 hours.

Micro-B charging port on Tribit MaxSound Plus speaker

Figure 4: Micro-B Charging Port (for BTS25 model).

Type-C charging port on Tribit MaxSound Plus speaker

Figure 5: Type-C Charging Port (for BTS25S model).

2. Bluetooth Pairing

Press and hold the Power button for 2 seconds to turn on the speaker. The Bluetooth indicator will flash blue, indicating it's in pairing mode.
On your Bluetooth-enabled device (smartphone, tablet, laptop), go to the Bluetooth settings.
Search for "Tribit MaxSound Plus" in the list of available devices and select it to connect.
Once connected, the Bluetooth indicator will turn solid blue, and you will hear an audible confirmation.
If pairing fails, turn off the speaker and repeat the steps.

3. AUX Connection

For devices without Bluetooth, you can use the included 3.5mm AUX cable.

Connect one end of the AUX cable to the speaker's AUX port (located on the rear panel).
Connect the other end to the audio output jack of your device.
The speaker will automatically switch to AUX mode.

Operating Instructions

Basic Controls:

Button	Action	Function
Power	Press and hold for 2 seconds	Power On/Off
Bluetooth	Short press	Enter Bluetooth pairing mode (if not already connected)
Play/Pause	Single press	Play/Pause music
Play/Pause	Double press	Next track
Play/Pause	Triple press	Previous track
Volume Up (+)	Short press	Increase volume
Volume Down (-)	Short press	Decrease volume
XBass	Short press	Toggle XBass mode On/Off (enhances low frequencies)

Maintenance

Keep the speaker away from extreme temperatures, direct sunlight, and corrosive liquids.
Clean the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
Ensure the rubber flap covering the ports is securely closed when using the speaker near water to maintain its IPX7 waterproof rating.
Store the speaker in a cool, dry place when not in use for extended periods.

Troubleshooting

Speaker does not turn on:

Ensure the speaker is fully charged. Connect it to a power source and allow it to charge for at least 30 minutes before attempting to power on again.

Cannot pair with Bluetooth device:

Make sure the speaker is in pairing mode (Bluetooth indicator flashing blue).
Ensure your device's Bluetooth is enabled and within range (up to 100 feet/30 meters).
Forget "Tribit MaxSound Plus" from your device's Bluetooth list and try pairing again.
Turn off both the speaker and your device, then restart and attempt pairing.

No sound or low volume:

Check the volume levels on both the speaker and your connected device.
Ensure the speaker is properly connected via Bluetooth or AUX.
If using AUX, verify the cable is fully inserted and not damaged.

Sound distortion:

Reduce the volume on both the speaker and your connected device. Ensure the audio source is of good quality.

User Tips

The speaker delivers 2 x 12W of power for a total of 24W output.
Be aware that there are two versions of the MaxSound Plus: BTS25 uses a Micro-B charging port, and BTS25S uses a Type-C charging port. Check your specific model for the correct cable.
For optimal sound, experiment with the XBass feature to find your preferred audio profile.

Specifications

Feature	Detail
Brand Name	Tribit
Category	Speakers
Use	Camping
Bluetooth Version	5.0
Input Power(W)	<25 W
Impedance	4-8 Ohm
Voice Control	No
Frequency Range	80Hz-20KHz
Waterproof Rating	IPX7
Support APP	No
Material	Plastic
Inbox adaptor	No
Intelligent Personal Assistant	None
Built-in Microphone	Yes
Audio Crossover	Full-Range
Number of Loudspeaker Enclosure	1
Power Source	Battery
PMPO	25 W
Channels	2 (2.0)
Battery	Yes
Communication	AUX, USB
Speaker Type	Portable
Cabinet Material	PVC
Origin	Mainland China
Output Voltage	25 W
Certification	CE, FCC
Charging Time	4 hrs
Play Time	20 hrs
Charging Port	BTS25(Micro-B), BTS25S(Type-C)

Warranty and Support

For warranty information, technical support, or any product-related inquiries, please refer to the contact details provided with your purchase or visit the official Tribit website.

Related Documents - MaxSound Plus

	Tribit MaxSound Plus Portable Wireless Speaker User Manual User manual for the Tribit MaxSound Plus portable wireless speaker (BTS25S), detailing specifications, safety precautions, button functions, connections, Bluetooth pairing, and stereo mode. Includes declarations of conformity.
	Tribit MAXSound Plus Portable Wireless Speaker User Manual Comprehensive user manual for the Tribit MAXSound Plus portable wireless speaker (Model IC-BTS25), covering setup, operation, safety precautions, and specifications. Learn how to connect via Bluetooth or AUX and enjoy amplified audio.
	Tribit MAXSound Plus Portable Wireless Speaker User Manual User manual for the Tribit MAXSound Plus portable wireless speaker, detailing setup, features, safety precautions, and specifications.
	Tribit StormBox Mini BTS33 Bluetooth Speaker User Manual User manual for the Tribit StormBox Mini BTS33 Bluetooth speaker, detailing its features like 12W 360° sound, XBass, LED lights, 12-hour playtime, and IPX7 waterproof rating for outdoor use.
	Tribit StormBox Pro BTS31 Portable Wireless Speaker User Manual Comprehensive user manual for the Tribit StormBox Pro BTS31 portable wireless speaker, covering setup, features, controls, and specifications.
	How to Upgrade Firmware for Tribit MAXSound Plus A step-by-step guide on how to upgrade the firmware for the Tribit MAXSound Plus speaker using the Media product tool.