yieryi BLE-9100

Contents

YIERYI BLE-9100 Smart Bluetooth Dissolved Oxygen Meter Instruction Manual

Model: BLE-9100

Introduction

The YIERYI BLE-9100 is a smart Bluetooth dissolved oxygen meter designed for professional measurement of dissolved oxygen concentration and temperature. It features mobile phone APP intelligent control, real-time data transmission, and cloud-based data management, making it suitable for various applications including drinking water analysis, aquarium monitoring, fish tank maintenance, swimming pools, farmland irrigation, and laboratory use.

Safety Precautions

  • Keep the device away from children.
  • Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure the probe protective cover is in place when not in use to prevent damage.
  • Handle the electrode with care to avoid breakage.
  • Use only specified batteries (3*1.5V button battery).

Package Contents

The BLE-9100 package typically includes:

  • 1 x BLE-9100 Bluetooth Dissolved Oxygen Meter
  • 1 x Dissolved Oxygen Probe (with specified wire length: 1M, 3M, or 5M depending on model)
  • Electrolyte solution (for probe filling)
  • Probe protective covers (6 pieces)
  • Instruction Manual
BLE-9100 Dissolved Oxygen Analyzer package contents including meter, probe, electrolyte, and manual.
BLE-9100 Dissolved Oxygen Analyzer and its accessories.

Product Overview

Diagram of BLE-9100 Dissolved Oxygen Meter with labeled parts: LCD display, Lock/temperature switch key, Mode key/calibration key, Power button, Electrode interface, Battery compartment, Probe wire, and Probe.
Key components and dimensions of the BLE-9100 meter and probe.

Meter Components:

  • LCD Display: Shows dissolved oxygen (DO) and temperature (TEMP) readings.
  • Lock/Temperature Switch Key (HOLD/TEMP): Locks the current reading or switches between temperature units.
  • Mode Key/Calibration Key (MODE/CAL): Changes measurement mode or initiates calibration.
  • Power Button (ON/OFF): Turns the device on/off.
  • Electrode Interface: Connects the probe to the main unit.
  • Battery Compartment: Houses 3*1.5V button batteries.

Probe:

The dissolved oxygen probe is a thin-film type with aurora sensors and thermistors for temperature measurement and compensation. It separates the test solution from the sensing electrode, allowing oxygen to pass through for measurement.

Setup

1. Battery Installation

Open the battery compartment and insert 3*1.5V button batteries, ensuring correct polarity. Close the compartment securely.

2. Probe Connection

Connect the dissolved oxygen probe to the electrode interface on the main meter unit. Ensure a secure connection.

3. Electrolyte Filling (for Filling Probe models)

If your model includes a filling probe, carefully fill the probe with the provided electrolyte solution according to the instructions on the electrolyte bottle. Ensure no air bubbles are trapped inside the probe. This step is crucial for accurate dissolved oxygen measurements.

Bottle of electrolyte solution labeled 'ELECTROLYTE FILL'
Electrolyte solution for probe filling.

4. Mobile APP Download

Scan the appropriate QR code below to download and install the mobile APP software for your phone's operating system (Android or iOS).

QR codes for Android and iOS APP downloads
Scan to download the mobile application.

5. Bluetooth Connection

  1. Press and hold the power button on the meter for 5 seconds until the Bluetooth logo appears on the meter's display. This indicates Bluetooth is enabled.
  2. On your mobile phone, go to Bluetooth settings and turn on Bluetooth.
  3. Search for available devices and select 'BLE-9100' to pair.
  4. Open the downloaded APP. The meter data should now synchronize with the APP.
Video demonstrating Bluetooth connection and basic APP functions.

Operating Instructions

1. Basic Measurement

  1. Ensure the meter is powered on and the probe is connected.
  2. Immerse the probe into the water sample you wish to test.
  3. Wait for the readings on the LCD display to stabilize. The display will show dissolved oxygen (mg/L or %) and temperature (°C or °F).

2. Mobile APP Intelligent Control

The mobile APP provides a full-screen display of multiple parameters and enhanced control features:

  • Full Display of Reading: View DO (mg/L), DO (%), Temperature (°C), and Temperature (°F) simultaneously.
  • Backlight Control: Turn the screen backlight on or off directly from the APP.
  • Measurement Value Lock: Use the 'Hold Reading' function in the APP to freeze the current measurement.
  • Manual Data Saving: Save current readings manually via the 'Save Reading' button in the APP.
  • Calibration Record: View past calibration records within the APP.
  • Function Settings: Access advanced settings like auto-save interval, DO Max/Min limits, and altitude compensation.
Mobile APP interface showing full display of readings, product parameter view, automatic data storage, calibration record, and function settings.
Overview of mobile APP intelligent control features.

3. Data Synchronization and Storage

The meter's data is synchronized to the mobile APP, allowing multiple data points to be displayed simultaneously. This eliminates the need to frequently operate the meter directly to view data.

Mobile APP showing synchronized data display from the dissolved oxygen meter.
Data synchronization between the meter and the mobile APP.

Data can be saved automatically or manually. Saved data can be exported to Excel and shared with others. You can set the auto-save time interval in the APP settings and add notes when saving manually. Saved data can also be deleted.

Mobile APP interface showing automatic data storage, manual saving, and sharing options for data.
Automatic data storage and sharing features.

4. Maximum and Minimum Settings

You can set maximum and minimum limits for dissolved oxygen in the APP. If a test result falls outside this defined range, the value will be displayed in red on the APP, providing an immediate visual alert.

Mobile APP interface showing settings for maximum and minimum dissolved oxygen limits. A red value is displayed when the reading is outside the set range.
Setting maximum and minimum dissolved oxygen limits in the APP.

5. Language Switching

The APP supports both Chinese and English. To switch languages, click the globe icon in the upper right corner of the APP interface and select your preferred language.

Calibration

The BLE-9100 features automatic calibration. Refer to the APP's calibration section for detailed instructions on performing calibration. Typically, this involves placing the probe in a known calibration solution and following the on-screen prompts. The meter supports two sets of optional calibration points.

Maintenance

1. Probe Care

The probe is highly sensitive and replaceable. Always ensure the probe protective cover is used when the meter is not in operation to prevent damage. The device is equipped with 6 probe protective covers for convenience.

Image showing the detachable probe and multiple probe protective covers.
Detachable probe and protective covers.

2. Cleaning

After each use, rinse the probe with distilled water to remove any residue from the sample. Do not use abrasive materials or harsh chemicals to clean the probe or meter body.

3. Electrolyte Replacement (for Filling Probe models)

Over time, the electrolyte solution in the filling probe may deplete or become contaminated, affecting accuracy. Replace the electrolyte solution as needed, following the instructions provided with the electrolyte or in the APP.

4. Storage

Store the meter and probe in a cool, dry place with the probe protective cover securely in place. If storing for an extended period, remove the batteries to prevent leakage.

Troubleshooting

1. Bluetooth Connection Issues

If the meter does not connect to Bluetooth:

  • Ensure the meter's Bluetooth function is turned on (press and hold power button for 5 seconds until Bluetooth logo appears).
  • Verify your phone's Bluetooth is enabled and searching for devices.
  • Restart both the meter and your phone, then try connecting again.

2. Inaccurate Readings

  • Perform a calibration as described in the APP.
  • Check if the probe is clean and free from damage.
  • Ensure the electrolyte solution (if applicable) is fresh and properly filled.
  • Verify that the temperature compensation is functioning correctly.

3. Red Data Display in APP

If the measurement result is displayed in red in the APP, it indicates that the value is outside the maximum or minimum limits you have set in the APP's function settings. Review your set limits or the water sample conditions.

4. Meter Not Powering On

  • Check if the batteries are correctly installed and have sufficient charge.
  • Replace the batteries with new ones.

Specifications

FeatureSpecification
ModelBLE-9100
Dissolved Oxygen Range0.0~30.0 mg/L, 0.0-300.0%
Temperature Range0.1 ~ 40 °C, 32.1-104.0 °F
Dissolved Oxygen Accuracy±1.5% F.S
Dissolved Oxygen Saturation Accuracy±1.5% F.S
Temperature Accuracy±0.5 °C
Dissolved Oxygen Resolution0.1 mg/L
Oxygen Concentration Resolution0.1%
Temperature Resolution0.1 °C / 0.1 °F
Automatic Temperature Compensation0-40 °C
Use Environment0.1-40.0 °C, RH max: 90%
Meter Size155 x 35 x 35 mm
Probe Line Length1.5 m (available in 1M, 3M, 5M options)
Power Supply3*1.5V button battery (NOT INCLUDE)
Auto Shut-off TimeApprox. 8 minutes
Is Smart DeviceYes
With BacklightYes
Display TypeDIGITAL
CertificationCE

Warranty and Support

Warranty Information

This product is covered by standard AliExpress buyer protection policies, including:

  • Free Returns: Within 90 days of purchase.
  • Fast Delivery Guarantee: A $1.00 coupon code if delivery is delayed. Refunds are provided if the package is lost or items are damaged. Full refund if no delivery within 60 days.

Customer Support

For any issues or inquiries, please contact the seller directly through the AliExpress platform. Ensure you provide your order details for efficient assistance.

Brand Story (YIERYI)

The YIERYI brand, registered in 2016, specializes in precision measurement instruments such as refractometers, pH meters, TDS/EC pens, soil meters, and scales. The brand focuses on using high-precision imported chips from Taiwan and South Korea to ensure data accuracy. Products are designed to be portable, lightweight, and user-friendly. All products undergo rigorous testing and calibration to ensure quality before being released to the market. YIERYI aims to bring reliable and healthy measurement solutions to every household globally.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.