K&F CONCEPT A255C2+BH-35L

Contents

K&F Concept Professional Carbon Fiber Tripod

Model: A255C2+BH-35L (KF09.103)

Product Overview

The K&F Concept A255C2+BH-35L is a professional-grade carbon fiber tripod designed for photographers seeking a compact, portable, and stable support solution. It features a 360° ball head, a detachable monopod function, and flexible height adjustments, making it suitable for various photography scenarios including video, action, 360° video, point & shoot, DSLR, and mirrorless system cameras.

Video: K&F Concept Tripod A255C2+BH-35L product demonstration, highlighting portability, carbon fiber construction, center column usage, load capacity, and 360 panoramic shooting capabilities.

K&F Concept Carbon Fiber Tripod and Monopod

Image: The K&F Concept A255C2+BH-35L Carbon Fiber Tripod in tripod and monopod configurations, showcasing its versatility.

Specifications

FeatureSpecification
Model NumberKF09.103 (A255C2+BH-35L)
MaterialCarbon Fiber (10x construction)
TypeProfessional Tripod
Weight1.323 kg / 2.9 lbs
Load Capacity15 kg / 33 lbs
Max Extended Length1560 mm / 61.4 inches
Folded Length490 mm / 19.3 inches
Minimum Working Height480 mm / 18.9 inches
Leg Sections5
Leg Diameter13-25 mm / 0.5-0.98 inches
Leg Lock TypeTwist Lock
Feet FeaturesCan be reversed 180° and folded
Tripod HeadBall Head BH-35L
Ball Head MaterialAluminum Alloy
Ball Head Load Capacity15 kg / 33.1 lbs
Ball Head Diameter3.5 cm / 1.38 inches
Ball Head Height8 cm / 3.15 inches
Ball Head Weight0.26 kg / 0.58 lbs
Ball Head Bottom Interface3/8 inch screw
Camera Connection1/4 inch screw
Tripod with camera and specifications

Image: K&F Concept A255C2+BH-35L Tripod with a camera, illustrating key specifications like max height, folded length, load capacity, and material.

Ball Head BH-35L specifications

Image: Detailed view of the BH-35L Ball Head with its specific load capacity, ball diameter, height, weight, material, and interface.

Setup Instructions

  1. Unpack and Inspect: Carefully remove all components from the packaging. Ensure all parts are present and undamaged.
  2. Extend Tripod Legs: Loosen the twist locks on each leg section. Extend the legs to your desired height and angle. Securely tighten all twist locks to ensure stability.
  3. Adjust Leg Angles: Each leg can be independently adjusted to different angles for uneven terrain or low-angle shooting. Press the leg angle adjustment tab near the top of each leg to change its position.
  4. Attach Ball Head: The BH-35L ball head is typically pre-attached. If not, screw the ball head onto the 3/8" screw at the top of the tripod's center column until secure.
  5. Mount Camera: Attach your camera to the quick release plate on the ball head using the 1/4" screw. Ensure the camera is firmly secured to the plate. Then, slide the quick release plate with the camera into the ball head clamp and lock it in place.
  6. Adjust Center Column (Optional): For additional height, loosen the center column lock knob and extend the center column. Tighten the knob firmly once the desired height is reached. For enhanced stability, it is recommended to shoot without extending the center column unless necessary.
    Enhanced Stability with and without center column

    Image: Comparison illustrating enhanced stability when using the tripod without the center column versus with the center column extended.

  7. Fold Tripod: To fold, reverse the process: loosen center column, retract it, loosen leg twist locks, retract leg sections, and fold the legs upwards 180° over the ball head for a compact form.
    Compact and Portable Tripod

    Image: Demonstrating the compact and portable nature of the tripod when folded, showing it is 30% smaller than traditional structures.

Operating Instructions

  1. Height Adjustment: Use the twist locks on the leg sections to adjust the tripod's height. Ensure all locks are fully tightened before use. The tripod offers a wide range from 48cm (18.9") to 156cm (61.4").
    Tripod height variations

    Image: Visual representation of the tripod's various height configurations, including monopod, folded, low-angle, and fully extended setups.

  2. Ball Head Operation:
    • Locking Knob: Loosen the main locking knob to adjust the camera's angle freely. Tighten it firmly to secure the camera in position.
    • Panning Base: The ball head features a 360° panning base. Loosen the panning lock knob to rotate the camera horizontally for panoramic shots. Tighten to lock.
    • Friction Control: Some ball heads may have a separate friction control knob to adjust the resistance of the ball movement.
  3. Monopod Conversion:
    • Unscrew the leg with the foam grip from the tripod body.
    • Unscrew the ball head from the center column.
    • Screw the ball head onto the top of the detached leg.
    • Extend the monopod sections using the twist locks to your desired height.

    This allows for flexible shooting angles, including low-angle and high-angle shots, and can also serve as a walking stick.

  4. Load Capacity: Always ensure your camera and lens combination does not exceed the maximum load capacity of 15kg (33lbs) to maintain stability and prevent damage.

Maintenance

  • Cleaning: After use, especially in dusty or sandy environments, wipe down the tripod legs and ball head with a soft, damp cloth. Avoid using harsh chemicals.
  • Lubrication: Periodically check the twist locks and ball head for smooth operation. If necessary, apply a small amount of silicone-based lubricant to moving parts, avoiding excessive application.
  • Storage: Store the tripod in a dry, clean place, preferably in its carrying bag, to protect it from dust and moisture.
  • Check Screws and Locks: Regularly inspect all screws and locking mechanisms to ensure they are tight and functioning correctly.

Troubleshooting

  • Tripod is unstable:
    • Ensure all leg twist locks are fully tightened.
    • Verify that the legs are spread evenly and the tripod is on a stable surface.
    • Avoid over-extending the center column if maximum stability is required.
    • Check that the camera is securely mounted to the quick release plate and the plate is locked into the ball head.
  • Ball head movement is stiff or loose:
    • If stiff, check for dirt or debris. Clean the ball head thoroughly.
    • If loose, ensure all locking knobs (main lock, panning lock, friction control if present) are properly tightened.
  • Leg sections do not extend/retract smoothly:
    • Clean the leg sections and twist locks to remove any accumulated dirt or sand.
    • Apply a small amount of silicone lubricant if necessary.

User Tips

  • Optimal Tripod Height: A general guideline for comfortable shooting is to set the tripod height so that the camera's viewfinder is roughly at your eye level when standing. Consider your height minus approximately 15cm (6 inches) and then subtract the camera's height. Adjust as needed for specific shots.
  • Choosing Load Capacity: Always select a tripod with a load capacity significantly higher than the combined weight of your heaviest camera body and lens setup. For example, if your equipment weighs 2kg, choose a tripod rated for at least 4kg to ensure safety and stability.
  • Twist Locks vs. Lever Locks: This tripod uses twist locks, which are known for their simple structure, ease of maintenance, and secure locking. Ensure they are fully tightened for maximum stability.
  • Low-Angle Shooting: Utilize the adjustable leg angles and the ability to reverse the center column for extremely low-angle shots, allowing for creative perspectives.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact K&F Concept customer service directly through their official website or the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.