SIMICAM HLC-M510A/HLC-M810A/HLC-M510B/HLC-M810B

Contents

SIMICAM 4K/8MP POE Dome IP Security Surveillance Camera User Manual

Model: HLC-M510A/HLC-M810A/HLC-M510B/HLC-M810B

Brand: SIMICAM

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SIMICAM 4K/8MP POE Dome IP Security Surveillance Camera. This camera series includes models HLC-M510A, HLC-M810A, HLC-M510B, and HLC-M810B, offering advanced surveillance capabilities for both indoor and outdoor environments.

The HLC-M510A/HLC-M510B models feature 5-megapixel resolution (2560x1920), providing crystal clear video with fine details. They include a built-in microphone for ambient sound recording, enhancing security. The HLC-M810A/HLC-M810B models boast a 4K (3840x2160) resolution, which is nearly four times that of 1080p Full HD, ensuring even greater clarity and detail.

All models support independent operation and feature a built-in MicroSD card slot (up to 256GB) for local storage. They integrate seamlessly with HIKJBSET 8-channel or 16-channel NVRs and HIKJBSET POE surveillance systems.

SIMICAM 4K Ultra HD POE Camera features: Audio, Infrared night vision, Human detection, Smart AI, Alarm Alert, Remote Access, Waterproof, H.265, Mobile detection
Key features of the SIMICAM 4K Ultra HD POE Camera, including audio, infrared night vision, human detection, Smart AI, alarm alerts, remote access, waterproof design, H.265 compression, and mobile detection.

2. Device Overview

Familiarize yourself with the physical components of your SIMICAM camera:

Diagram of SIMICAM camera components: Mount, Metal Case, Infrared Lights, Microphone, Lens, Daylight Sensor, Micro SD Socket, Speaker, Network Cable, Power Port.
Detailed view of the camera's components.
No. Component
1Mount
2Metal Case
3Infrared Lights
4Microphone
5Lens
6Daylight Sensor
7Micro SD Socket
8Speaker
9Network Cable
10Power Port

3. Setup

3.1. Physical Installation

To install the camera, loosen the mount, adjust the camera to your desired direction, and then twist the mount back to fix the camera in place.

Diagram showing how to adjust the camera mount for positioning.
Loosen the mount, adjust the cam in any direction, and twist it back to fix the camera.

3.2. Connectivity Options

Your SIMICAM camera offers flexible connectivity options:

  1. **Work with a standard POE Switch (48-54V):** Connect the POE camera to a POE switch, which then connects to your router. This setup provides both power and data over a single Ethernet cable.
  2. **Work with an Onvif POE NVR (48-54V):** Connect the POE camera directly to a POE NVR. The NVR handles both power and data, and connects to your router for network access.
  3. **Work with a router (DC 12V):** If not using POE, power the camera with a DC 12V power supply and connect it to your router via a standard Ethernet cable.
Wiring diagrams for connecting the POE camera with a POE switch, POE NVR, or directly to a router with DC 12V power. Also shows LAN port and DC 12V power port details.
Connectivity options and port details for the camera.

For optimal 4K resolution, ensure your NVR supports 4K. If your NVR is 5MP/4MP/1080P, you will only achieve that respective resolution.

3.3. Mobile Application Setup (ICSee / XMEye Pro)

To view your camera remotely, download and install the mobile application (ICSee or XMEye Pro) on your smartphone (Android or iOS).

  1. **Download the App:**
    • **Method 1 (QR Code):** Scan the QR code below to download the client.
    • **Method 2 (App Store):** Search for "ICSee" or "XMEye Pro" in your device's app market (e.g., Google Play Store, Apple App Store).
  2. **Register an Account:** Open the app, register a new account, and log in. Your password must be 8-64 characters and contain uppercase letters, lowercase letters, and numbers. Special characters like !@#$%^&*()_][[{?/<> are also allowed.
  3. **Add Devices:** After logging in, tap the "+" button to add a new device.
  4. **Connect to Phone:** You can add cameras within the same local area network or by scanning the camera's QR code.
Flowchart showing steps to connect the camera to a phone: 1. Download XMEye Pro app, 2. Register an account and login, 3. Add devices (connect camera to NVR first), 4. Add successfully, enjoy live video.
Steps to connect your camera to the mobile app.

To add a camera by scanning its QR code, ensure the camera is connected to the NVR first. The camera's serial number and QR code can be found on the device itself or through the VMS software (see section 3.4).

3.4. Computer Software (VMS) Setup

For PC-based management, download and install the VMS software:

Note: The Mac version of VMS is only applicable to Apple system computers and can only access devices within the local area network. Remote access is not possible with the Mac version.

The default username for VMS is admin and the password is admin.

To add a camera to VMS:

  1. Open VMS and navigate to the Device Manager.
  2. Use the "IPV4 Search" or "Onvif Search" function to find cameras on your local network.
  3. Select the detected camera and click "Add" to include it in your device list.
  4. You can also add a camera by its serial number. The camera's serial number is typically found on the device itself.

4. Operating Instructions

4.1. Intelligent Playback

If you have configured a memory card for the camera, you can remotely replay recordings directly from your phone using the mobile app.

Screenshot of the mobile app's intelligent playback interface, showing a timeline of recorded events.
Intelligent playback interface on the mobile app.

4.2. Camera Lighting Settings

The camera supports various lighting modes for different conditions:

  • **Full Light:** Provides continuous white light illumination.
  • **Infrared Night Vision:** Uses infrared LEDs for black and white night vision.
  • **Double Light Alert:** Combines infrared for general night vision with white light activation upon motion detection for enhanced visibility and deterrence.

These settings can be adjusted via the mobile app or VMS software.

Screenshots of the mobile app showing camera lighting settings, including control mode, sensitivity, light on duration, and intelligent alert options.
Adjusting camera lighting settings in the mobile app.

4.3. Motion Detection

The camera offers customizable motion detection events to monitor specific areas:

  • **Human Body Detection:** Detects human shapes to reduce false alarms.
  • **Line Crossing Detection:** Triggers an alert when an object crosses a predefined virtual line.
  • **Intrusion Detection:** Alerts when an object enters or exits a specified virtual region.
  • **Specific Region Detection:** Allows you to define custom areas for motion monitoring.

When a danger is detected, the camera will trigger alerts by sending email notifications and pushing messages to your device.

Screenshots of the mobile app showing alarm schedule, alert area definition (triangle, oblong, pentagon, L shape), and alarm line settings with trigger direction options.
Customizable motion detection settings in the mobile app.

4.4. Audio Recording

The built-in microphone allows the camera to record ambient sound, providing authentic audio alongside video recordings for a more comprehensive surveillance record.

Image depicting a security camera with sound waves emanating from it, illustrating its audio recording capability.
Audio recording feature of the camera.

4.5. Night Vision

The camera provides high-quality night vision with Taiwan imports 24pcs Tyntek 12Mil LED lights. The infrared radiation ensures 24-hour vigilance with a night vision range of up to 100 feet in the dark.

An Infrared Cut Filter (ICR) ensures optimal image quality day and night. During the day, the filter blocks infrared light to maintain accurate colors. When light levels are low, the filter disengages, allowing infrared light into the lens, and the image switches to monochrome black and white.

Comparison of night vision quality between 4K (sharp and super clearer images) and 2MP (clear images) showing a house at night.
Night vision comparison: 4K offers sharper and clearer images than 2MP.

4.6. Video Compression (H.265)

The camera utilizes advanced H.265 video compression technology. H.265 provides clearer HD resolution at a lower bit rate, saving 40%-50% more storage space compared to H.264, and enabling smoother playback and faster transmission.

Comparison of H.264 and H.265 video compression, showing H.265 saves 87% storage on hard disk and provides smooth video with low bandwidth (30%) compared to H.264's high bandwidth (90%).
H.265 video compression offers significant storage savings and smoother video.

4.7. Face Detection

The camera supports Smart AI Face Recognition/Face detection/face playback. This feature makes it easier to capture details around you. When someone invades, the SIMICAM security camera can clearly capture the details of the person's face, enhancing property protection.

Note: The face detection function requires the use of a SIMICAM NVR or an XM Face detection NVR.

Screenshot of an NVR interface showing face detection playback, with a main video frame and a timeline of detected faces.
Face detection playback interface.

4.8. Lens Options

The camera is available with different lens sizes, affecting the viewing angle and face recognition distance:

  • 2.8mm/3.6mm: Provide a large viewing angle.
  • 6mm: Offers a balanced view.
  • 8mm/12mm: Available upon request for narrower fields of view and longer recognition distances.
Diagram illustrating different lens focal lengths (2.8mm, 3.6mm, 4mm, 6mm, 8mm, 12mm) and their corresponding face recognition distances (2M, 4M, 6M, 8M, 10M, 15M).
Lens focal length and approximate face recognition distance.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your camera system.

  • **Firmware Management:** Periodically check for and update camera firmware via the mobile app's Tools section or the VMS software to ensure you have the latest features and security patches.
  • **Clear Cache:** Use the mobile app's Tools section to clear the cache and free up storage space on your device.
  • **Computer Management Tools:** For advanced maintenance such as upgrading, modifying device IP, or restoring camera settings, use the Windows system computer management tools. These tools can be downloaded from: Device Manage 20240108 R144915.

6. Troubleshooting

If you encounter any issues during operation, consider the following:

  • **Resolution Issues:** If you are not getting 4K resolution, ensure your Network Video Recorder (NVR) is 4K compatible. If your NVR supports 5MP, 4MP, or 1080P, the camera's output will be limited to that resolution.
  • **Connectivity Problems:** Double-check all cable connections (Ethernet, power). Ensure your POE switch or NVR is providing adequate power (48-54V) if using POE. If using DC12V, verify the power adapter is functioning correctly.
  • **App/Software Issues:** Ensure your mobile app and VMS software are up to date. Try clearing the app cache or reinstalling if problems persist.
  • **Face Detection Not Working:** Confirm that you are using a SIMICAM NVR or an XM Face detection NVR, as this feature requires compatible hardware.

For further assistance, please contact technical support using the details provided in the 'Warranty and Support' section.

7. Specifications

Attribute Value
Brand NameSIMICAM
StyleDome Camera
High Definition8.0 Megapixels
ConnectivityIP/Network Wired
Lens (mm)3.6mm (other options available)
SensorCMOS
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsWindows 7, Windows 10
Power Supply (V)POE48V/DC12V
Power Consumption (W)8W
IR Distance (m)About 10-30M
Video Compression FormatH.265
Viewing Angle85°
Minimum Illumination (Lux)0.01LUX
Audio OutputNone (Built-in Mic for input)
is_customizedNo
ColorWHITE
InstallationCeiling
Internal StorageNone (Supports TF Card)
Power SupplyWith Poe
TF CardNone (Supports up to 256GB MicroSD)
Megapixels8MP
Movement Range (Tilt)Other
App nameOther (ICSee/XMEye Pro)
IP RatingIP66
Color Night VisionNo
Lens QuantitySingle Lens
Zoom typeNone
High-concerned chemicalNone
Whether or Not 50Vac or 75Vdc or Higher Power SupplyNo
OriginMainland China
Special FeaturesVandal-proof
CertificationCE
Shell MaterialMetal
Camera FeaturesInfrared night vision
System CompatibilityONVIF
Camera MaterialSemi-metal body, plastic protective cover
Our AdvantageBuilt-in Mic
Power Over EthernetVia PoE injector or Switch
Day & NightIR Cut filter with auto switch
IP Camera4mp/5mp/4k Options

8. User Tips

  • **NVR Compatibility for 4K:** To achieve the full 4K resolution (8MP), ensure your Network Video Recorder (NVR) is 4K compatible. If your NVR supports lower resolutions (e.g., 5MP, 4MP, 1080P), the camera's output will be limited to that NVR's maximum supported resolution.
  • **Camera Housing Color:** The camera housing is white.
  • **PDF User Manual:** A detailed user manual in PDF format is available for download. You can access it here.

9. Compliance and Safety

⚠️ Disclaimer:

Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

10. Warranty and Support

If you have any questions or encounter any problems during the operation of your SIMICAM camera, please contact our technical support team for timely assistance.

  • **Global Customer Support Hotline:** +13423676600
  • **WhatsApp:** +861342367660
  • **Email:** 453836824@qq.com

Your security and privacy are important. We do not share your personal details with any third parties without your consent and protect your privacy by keeping your personal details safe and secure.

11. Product Video

Watch the official product video for a visual guide on features and usage:

Official product demonstration video.

© 2024 SIMICAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.