MiLESEEY TR256i TR160i

Contents

Mileseey TR256i / TR160i Mini Thermal Imaging Camera User Manual

Models: TR256i, TR160i

Brand: MiLESEEY

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Mileseey TR256i or TR160i Mini Thermal Imaging Camera. This device is designed to convert infrared radiation into visible thermal images, allowing for non-contact temperature measurement and visualization of heat patterns. It connects to Android devices via USB Type-C and utilizes a dedicated application for full functionality.

2. What's in the Box

  • Thermal Imager
  • Protective Bag
  • Retail Box
  • Lens Cleaning Cloth
  • User Manual
Contents of the Mileseey thermal camera retail box including the thermal imager, protective bag, lens cloth, and user manual.
Figure 2.1: Package Contents

3. Specifications

FeatureTR160iTR256i
Thermal Resolution160x120256x192
Wavelength8-14μm
Frame Rate25Hz
NETD<50mK @25℃
FOV (Field of View)35°x27°56°x42°
Lens3.2mm
Temperature Measurement Range-15℃~600℃
Temperature Measurement Accuracy± 2 ° C or ± 2%
Temperature Measurement FeaturesHighest, lowest, central point and area temperature measurement are supported
Color PaletteIron, white hot, black hot, rainbow, red hot, cold blue
LanguageEnglish
Working Temperature-10°C - 75°C
Storage Temperature-45°C - 85°C
IP RatingIP54
Dimensions34mm x 26.5mm x 15mm34.4mm x 56.6mm x 12.1mm
Net Weight19g20g
Battery IncludedNo
High-concerned chemicalNone
Is Smart DeviceNo
Power TypeNone
StyleEmbedded
InterfaceUSB Type-C / Compliant with OTG protocol
Detailed specifications table for TR160i and TR256i thermal imagers.
Figure 3.1: Detailed Product Specifications

4. Setup

4.1 Hardware Connection

  1. Ensure your Android smartphone supports OTG (On-The-Go) functionality. If necessary, enable OTG in your phone's system settings (often found under 'Connected devices' or 'USB settings').
  2. Carefully plug the Mileseey Mini Thermal Imaging Camera into your Android smartphone's USB Type-C port.

4.2 Software Installation

  1. Download and install the official Mileseey thermal imaging application from your device's app store (e.g., Google Play Store) or by scanning the QR code provided in the physical user manual.
  2. Upon first connection and app launch, grant any requested permissions for the app to access the USB device.
Video 4.1: Demonstration of connecting the thermal imager to an Android phone and initial app setup.

5. Operating Instructions

5.1 App Interface Overview

The Mileseey thermal imaging app features a clear and intuitive interface. The main screen displays the thermal image, a thermal color bar, and tool areas on the left and right for various functions and settings.

Screenshot of the Mileseey thermal imaging app interface showing thermal image area, color bar, and tool areas.
Figure 5.1: Software Interface Layout

5.2 General Settings

Access general settings via the gear icon in the app. Here you can configure:

  • Language: English
  • Temperature Unit: Switch between °C, °F, or K.
  • Record with Audio: Enable or disable audio recording for videos.
  • High and Low TEMP. Switch: Adjust the display of high and low temperature points.
  • Thermal Parameters: Adjust Emissivity (0.01-1.00), Temperature Adjustment (°C), Reflection Temperature (°C), and Ambient Temperature (°C) for accurate readings.

5.3 Temperature Measurement Modes

  • Regional Temperature Measurement: Select a point, line, or a specific area on the thermal image to instantly obtain temperature values for that region.
Screenshot demonstrating regional temperature measurement by selecting a point, line, or area on the thermal image.
Figure 5.2: Regional Temperature Measurement
  • High/Low/Center Temperature Tracking: The app can automatically track and display the highest, lowest, or central temperature points within the current field of view.
Screenshot showing high, low, and center temperature tracking on a thermal image.
Figure 5.3: High, Low, or Center Temperature Tracking

5.4 Color Palettes

Choose from a variety of color palettes to best visualize temperature differences for your specific inspection needs. Available palettes include White Hot, Black Hot, Red Hot, Iron, Rainbow, and Cold Blue.

Examples of multiple color palettes available in the thermal imaging app: White Hot, Black Hot, Red Hot, Iron, Rainbow, Cold Blue.
Figure 5.4: Multiple Color Palettes

5.5 High Temperature Alarm

Set a specific high-temperature alarm value. The device can highlight regions exceeding this threshold, facilitating quick identification of critical areas.

Screenshot of the app interface showing how to set a high temperature alarm value.
Figure 5.5: Setting High Temperature Alarm
Screenshot showing high-temperature regions highlighted on a thermal image.
Figure 5.6: Highlighting High-Temp Regions

5.6 Adjusting Temperature Range

By manually adjusting the displayed temperature range, the differences in the areas that need to be observed become more obvious, enhancing visual clarity for specific thermal patterns.

Comparison of thermal images with different temperature range adjustments, showing how differences become more obvious.
Figure 5.7: Adjusting Temperature Range for Clarity

5.7 Photo and Video Capture

The application allows you to capture still images and record videos of the thermal readings for documentation and later analysis.

All captured photos and videos are stored within the app's gallery, accessible for review and management.

6. Applications

The Mileseey Mini Thermal Imaging Camera is suitable for a wide range of applications, including but not limited to:

  • Line Maintenance
  • HVAC Overhaul
  • Equipment Maintenance
  • Pet Search
  • Animal Observation
  • Motherboard Inspection
Grid of images showing various applications of the thermal camera: Line Maintenance, HVAC Overhaul, Equipment Maintenance, Pet Search, Animal Observation, Motherboard Inspection.
Figure 6.1: Common Applications

7. Maintenance

  • Lens Cleaning: Use the provided soft lens cleaning cloth to gently wipe the camera lens. Avoid using abrasive materials, harsh chemicals, or excessive force, as this may damage the lens coating.
  • Storage: When not in use, store the thermal imager in its protective bag to shield it from dust, dirt, and potential impacts.
  • Environmental Conditions: Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight for prolonged periods. Operate and store the device within the specified working and storage temperature ranges.
  • General Care: Keep the device dry and clean. Do not attempt to disassemble or repair the device yourself, as this will void the warranty.

8. Troubleshooting

  • App Compatibility: If you experience issues with the app, ensure your Android phone model and Android version are compatible. Some older Android versions or specific phone models may have compatibility limitations. Contact customer service with your phone details for assistance.
  • OTG Function Not Working: If the camera is not detected by your phone, verify that your phone's OTG function is enabled. This setting might be found in your phone's system settings under 'Connected devices' or 'USB settings'. Restarting your phone or the app may also resolve minor connection issues.
  • Temperature Measurement Range Issues: The device is designed to measure temperatures from -15°C to 600°C. If you observe readings outside this range or unexpected limits (e.g., only up to 221°C), verify the device settings, especially emissivity, and ensure it's operating within its specified environmental conditions. Contact support if the issue persists.
  • Windows/iOS Support: This thermal camera is specifically designed for Android devices with USB Type-C OTG. It does not officially support Windows PCs or iOS devices (including iPhone 15) unless specific third-party adapters or software are used, which are not guaranteed by the manufacturer.
  • Unclear Thermal Images: If thermal images appear blurry or unclear, first check the camera lens for any dirt, dust, or smudges and clean it gently with the provided cloth. Also, ensure proper emissivity settings for the material being inspected, as incorrect settings can affect image accuracy.

9. User Tips

  • For optimal performance, always ensure your phone's OTG function is active before connecting the thermal camera.
  • Experiment with different color palettes to find the best visualization for your specific inspection task, as some palettes highlight certain temperature differences more effectively.
  • Utilize regional temperature measurement and high/low/center tracking features for precise analysis of heat distribution and quick identification of anomalies.
  • The device is highly effective for various applications, including electrical maintenance, HVAC diagnostics, and identifying heat leaks in buildings, as well as for hobbyist uses like pet searching or animal observation.
  • Consider the TR256i model for higher resolution (256x192) compared to TR160i (160x120) if more detailed thermal images are crucial for your work.

10. Warranty and Support

For technical support, warranty claims, or further assistance with your Mileseey TR256i or TR160i Mini Thermal Imaging Camera, please refer to the contact information provided in your physical user manual. You can also visit the manufacturer's official website at www.mileseeytools.com or send an email to service@mileseey.com.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.