Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your SHIMANO ALTUS RD-M310 Rear Derailleur. Designed for mountain bikes, this derailleur is compatible with both 7-speed and 8-speed drivetrain systems, offering reliable and smooth shifting performance. Please read this manual thoroughly before use to ensure safe and optimal performance.
Safety Information
WARNING:
- Always compare the size and specifications of this derailleur with your existing model before purchasing and installation to avoid incompatibility.
- If you lack experience with bicycle component installation, it is strongly recommended to seek assistance from a professional bicycle repair shop or a qualified mechanic to ensure correct and safe installation. Improper installation can lead to serious injury or damage to your bicycle.
Product Overview
The SHIMANO ALTUS RD-M310 is a robust rear derailleur engineered for mountain biking. It features a durable alloy construction and is designed to work seamlessly with 7-speed and 8-speed cassettes, supporting a wide range of gear ratios. Its design focuses on consistent shifting and longevity in varied riding conditions.


Specifications
| Feature | Specification |
|---|---|
| Model | Altus, RD-M310 |
| Color | Black |
| Speed Compatibility | 7-speed, 8-speed (3x7s, 3x8s) |
| Material | Alloy |
| Maximum Freewheel Teeth | 34T |
| Minimum Freewheel Teeth | 11T |
| Guide Chain Wheel Teeth | 13-15T |
| Weight | Approximately 313g (0.69 lb) |
| Type | Rear Derailleur |
| Components | Derailleurs |
| Origin | Mainland China |

Setup and Installation
Proper installation is crucial for the performance and longevity of your derailleur. If you are unsure about any steps, please consult a professional bicycle mechanic.
Tools Required:
- Hex wrenches (typically 5mm)
- Cable cutters
- Chain tool (if installing a new chain)
- Grease
Installation Steps:
Mounting the Derailleur:
The RD-M310 uses a round holescrew installation method. Apply a small amount of grease to the derailleur hanger threads. Thread the derailleur onto the hanger by hand, then tighten securely with a hex wrench. Do not overtighten.

Figure 4: Detail of the round holescrew installation point. Installing the Chain:
Route the chain through the derailleur cage, ensuring it passes correctly over the guide and tension pulleys. If installing a new chain, ensure it is cut to the correct length for your bike's drivetrain.
Connecting the Shift Cable:
Route the shift cable from your shifter through the cable housing and into the derailleur's cable anchor bolt. Pull the cable taut and secure it with the anchor bolt, ensuring not to overtighten.
Adjusting Limit Screws (H and L):
- High Limit (H-screw): This screw prevents the chain from shifting beyond the smallest cog and into the frame. With the chain on the smallest cog, adjust the H-screw so the guide pulley is directly aligned with the smallest cog.
- Low Limit (L-screw): This screw prevents the chain from shifting beyond the largest cog and into the spokes. With the chain on the largest cog, adjust the L-screw so the guide pulley is directly aligned with the largest cog.
Adjusting B-Tension Screw:
The B-tension screw adjusts the gap between the upper guide pulley and the cassette cogs. Shift the chain to the largest cog on the cassette and the smallest chainring on the crankset. Adjust the B-tension screw so there is a small, consistent gap (typically 5-6mm) between the guide pulley and the largest cog. This prevents the pulley from rubbing the cogs and ensures smooth shifting.
Indexing Gears:
With the limit screws and B-tension set, fine-tune the shifting by adjusting the cable tension. Shift through all gears, making small adjustments to the barrel adjuster on your shifter or derailleur until each shift is crisp and the chain runs smoothly on each cog without hesitation or noise.
For a more detailed visual guide, please refer to the official SHIMANO technical documentation, which may be available as a PDF at this link.
Operating Instructions
The SHIMANO ALTUS RD-M310 Rear Derailleur operates in conjunction with your bicycle's shifters to change gears. To shift, simply actuate your shifters according to the desired gear change. For optimal performance:
- Shift gears smoothly and deliberately. Avoid rapid, forceful shifts, especially under heavy pedaling load.
- Anticipate terrain changes and shift proactively.
- Avoid cross-chaining (e.g., using the largest front chainring with the largest rear cog, or smallest front with smallest rear), as this can cause excessive wear and inefficient power transfer.
Maintenance
Regular maintenance will extend the life and performance of your derailleur.
Cleaning:
Periodically clean the derailleur, especially the pulleys and cage, to remove dirt, mud, and grime. Use a brush and a suitable bike cleaner. Ensure all moving parts are free of debris.

Figure 5: Detail of the derailleur mechanism, highlighting areas that benefit from lubrication. Lubrication:
After cleaning, apply a light bicycle-specific lubricant to the pivot points of the derailleur and the chain. Avoid over-lubricating, as this can attract more dirt.
Inspection:
Regularly check the derailleur for any signs of damage, bending, or excessive wear on the pulleys. Ensure all bolts are tight and the derailleur hanger is straight. Inspect the shift cable and housing for fraying or kinks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor or slow shifting | Incorrect cable tension, dirty/worn cable/housing, bent derailleur hanger, worn chain/cassette. | Adjust cable tension using the barrel adjuster. Clean/replace cable and housing. Check and straighten/replace derailleur hanger. Inspect and replace worn drivetrain components. |
| Chain skips gears | Incorrect limit screw settings, worn chain/cassette, bent derailleur hanger. | Re-adjust H/L limit screws. Replace worn chain/cassette. Check and straighten/replace derailleur hanger. |
| Derailleur rubs against spokes or frame | Incorrect limit screw settings (H or L), bent derailleur hanger. | Adjust H or L limit screw to prevent over-shifting. Check and straighten/replace derailleur hanger. |
| Noisy operation | Lack of lubrication, dirty pulleys, misaligned derailleur, worn components. | Clean and lubricate the derailleur and chain. Check alignment and adjust indexing. Replace worn pulleys or other components. |
User Tips
- Regular Cleaning: Keep your derailleur clean, especially after riding in muddy or dusty conditions, to prevent premature wear and maintain smooth operation.
- Professional Installation: If you are not confident in your mechanical skills, invest in professional installation to ensure the derailleur is set up correctly and safely.
- Check Compatibility: Always double-check the derailleur's compatibility with your bike's frame, cassette, and shifters (7-speed or 8-speed) before purchase and installation.
- Gentle Shifting: Practice smooth and gentle shifting, especially when climbing or under load, to prolong the life of your drivetrain components.
Warranty and Support
For any issues not covered in this manual or for warranty inquiries, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.