QYT KT-9900 / KT-WP12

Contents

QYT KT-9900 / KT-WP12 Mini Mobile Radio User Manual

25W Dual Band VHF/UHF Car Ham Radio

1. Introduction

Thank you for choosing the QYT KT-9900 / KT-WP12 Mini Mobile Radio. This compact and powerful dual-band transceiver is designed for reliable communication in your vehicle. Featuring 25W output power, 200 programmable channels, and a clear LCD display, it supports both VHF (136-174MHz) and UHF (400-480MHz) frequency bands. This manual provides essential information for safe operation, setup, and maintenance of your radio.

2. Safety Information

  • Read all instructions carefully before operating the radio.
  • Do not operate the radio in explosive atmospheres or near flammable materials.
  • Ensure proper antenna installation and connection before transmitting.
  • Avoid prolonged exposure to direct sunlight or extreme temperatures.
  • Do not disassemble or modify the radio; this may void the warranty and cause damage.
  • Keep the radio away from water and moisture. This model is not waterproof.

3. Package Contents

Please check the box for the following items:

  • 1x QYT KT-9900 (KT-WP12) Mobile Radio Main Unit
  • 1x Microphone with Keypad and LCD Display
  • 1x Power Cable
  • 1x Mounting Bracket
  • 1x Set of Screws and Fuse
  • 1x User Manual (this document)

Depending on the kit purchased, additional accessories such as various antennas (Mini Antenna, NL-770S, NL-770R, SG-M507, SG-7900), magnetic bases, or RB400 mounts may be included.

Retail packaging box for the KT-WP12 Mobile Radio
Figure 3.1: KT-WP12 Retail Packaging

4. Product Overview

The QYT KT-9900 / KT-WP12 is a compact mobile radio designed for ease of use and robust performance. It features a main transceiver unit and a hand-held microphone with an integrated LCD display and keypad for convenient control.

QYT KT-9900/KT-WP12 Mini Mobile Car Radio with microphone and main unit
Figure 4.1: KT-9900/KT-WP12 Radio System

Main Unit

Top view of the KT-WP12 main unit showing antenna and power connectors
Figure 4.2: Main Unit Top View (Antenna and Power)
Front view of the KT-WP12 main unit showing data and speaker ports
Figure 4.3: Main Unit Front View (Data and Speaker)

Microphone

Close-up of the KT-WP12 microphone with LCD display and keypad
Figure 4.4: Microphone with LCD Display and Keypad
KT-WP12 main unit connected to the microphone
Figure 4.5: Main Unit and Microphone Connection

5. Setup Instructions

Follow these steps to set up your QYT KT-9900 / KT-WP12 mobile radio:

  1. Mounting the Main Unit: Use the provided mounting bracket and screws to securely install the main unit in a suitable location in your vehicle. Ensure it is in a place that does not obstruct driving and allows for proper ventilation.
  2. Antenna Connection: Connect your VHF/UHF antenna to the antenna connector on the main unit. Ensure the connection is tight. For optimal performance, use an antenna designed for the 136-174MHz and 400-480MHz bands.
  3. Power Connection: Connect the power cable to the main unit and then to your vehicle's 12V power source. Ensure correct polarity (red to positive, black to negative) and that the connection is fused.
  4. Microphone Connection: Plug the microphone cable into the designated port on the main unit.
  5. External Speaker/PTT (Optional): If using an external speaker or PTT, connect it to the appropriate ports on the main unit.

Antenna Kit Examples:

KT-9900/KT-WP12 radio kit with mini antenna and 9cm magnetic base
Figure 5.1: Radio Kit with Mini Antenna and Magnetic Base
KT-9900/KT-WP12 radio kit with NL-770S antenna (44.5cm), 5M cable, and RB400 mount
Figure 5.2: Radio Kit with NL-770S Antenna (44.5cm)

6. Operating Instructions

The QYT KT-9900 / KT-WP12 radio is controlled primarily via the microphone's keypad and LCD display.

Basic Operation:

  • Power On/Off: Press and hold the power button (usually on the microphone or main unit) to turn the radio on or off.
  • Volume Control: Adjust the volume using the dedicated controls on the microphone or main unit.
  • Frequency/Channel Selection: Use the keypad to directly enter frequencies or navigate through programmed channels using the UP/DOWN buttons.
  • Transmit (PTT): Press and hold the PTT (Push-To-Talk) button on the side of the microphone to transmit. Release to receive.
  • Menu Navigation: Use the 'MENU' button to access radio settings. Navigate with UP/DOWN and confirm with 'ENTER' or 'MENU' again.

Key Features:

  • PC Program: The radio supports PC programming for advanced settings and channel management. (Spread spectrum by program)
  • Dual Band: Operates on both VHF and UHF frequencies.
  • DTMF Function, 2 Tone, 5 Tone: For selective calling and advanced signaling.
  • Patrol Function: Allows scanning of pre-defined channels or frequencies.
  • Monitoring Function: For listening to weak signals.
  • Telehalo Function: (Refer to specific software manual for details)
  • Remote Death Function: Allows disabling a lost or stolen radio remotely (requires specific setup).
  • Boot Function: Customizable startup settings.
  • Alarm Function: For emergency signaling.
  • Call Key: Dedicated button for quick calls.

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
  • Connections: Periodically check all cable connections (antenna, power, microphone) to ensure they are secure and free from corrosion.
  • Fuse Replacement: If the radio does not power on, check the inline fuse on the power cable. Replace it with a fuse of the same rating if blown.
  • Software Updates: Check the manufacturer's website for any available firmware or programming software updates.

8. Troubleshooting

ProblemPossible CauseSolution
Radio does not power onLoose power connection, blown fuse, incorrect wiring.Check power cable connections. Inspect and replace fuse if necessary. Verify correct polarity.
No signal receptionAntenna not connected, incorrect frequency, squelch too high.Ensure antenna is securely connected. Verify correct frequency/channel. Adjust squelch level.
Cannot transmitAntenna issue, low power setting, PTT button malfunction.Check antenna connection. Verify power output setting. Test PTT button.
Poor audio qualityMicrophone connection, external speaker issue, interference.Ensure microphone is fully plugged in. Check external speaker if used. Move away from sources of electrical interference.

9. Specifications

FeatureSpecification
Model NumberKT-9900 / KT-WP12
Frequency RangeVHF: 136-174MHz, UHF: 400-480MHz
Output Power25W/20W (VHF/UHF)
Storage Channels200 Channels
Dimensions98x35x118mm
MaterialStrong Polycarbonate Plastic
DisplayYes (LCD)
Maximum Range10km-50km (terrain dependent)
Channel Spacing25KHz/20KHz/12.5KHz
Waterproof / Water-ResistantNo
Battery IncludedNo
CertificationCE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee

Receiving Specifications:

ParameterBroadbandNarrowband
Sensitivity (12dB SINAD)≤0.25μV≤0.35μV
Adjacent Channel Selectivity≥70dB≥60dB
Intermodulation≥65dB≥60dB
Spurious Response≥70dB≥70dB
Audio Response+1~-3dB (0.3~3KHz)+1~-3dB (0.3~2.55KHz)
Signal to Noise Ratio≥45dB≥40dB
Audio Distortion≤5%≤5%

Transmitting Specifications:

ParameterBroadbandNarrowband
Output Power25W (VHF) / 20W (UHF)25W (VHF) / 20W (UHF)
System16KΦF3E11KΦF3E
Adjacent Channel Power≥70dB≥60dB
Signal to Noise Ratio≥40dB≥36dB
Parasitic and Harmonic Waves≥60dB≥60dB
Audio Response+1~-3dB (0.3~3KHz)+1~-3dB (0.3~2.55KHz)
Audio Distortion≤5%≤5%
Detailed technical specifications table for the QYT KT-9900 / KT-WP12 radio
Figure 9.1: Full Technical Specifications

10. User Tips

  • Frequency Bands: This radio operates on VHF (136-174MHz) and UHF (400-480MHz) bands. It is not designed for Citizen Band (CB) frequencies (typically 27MHz AM/FM). Ensure your intended use aligns with these specifications.
  • Programming Software: For advanced customization and channel management, utilize the PC programming software. This allows for precise control over features like DTMF, 2-tone, 5-tone, and memory channels.
  • Antenna Choice: The performance of your mobile radio is highly dependent on the antenna. Choose an antenna that is properly tuned for the VHF/UHF bands and suitable for your vehicle and operating environment.

11. Warranty and Support

For warranty information, please refer to the specific terms provided at the time of purchase or contact your seller directly. Typically, products come with a manufacturer's warranty covering defects in materials and workmanship.

For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please contact the seller or manufacturer's customer service. Keep your purchase receipt or order details handy when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.