OBDLink OBDLink EX USB

Contents

OBDLink EX USB FORScan Adapter User Manual

Professional Scan Tool for Ford, Mazda, Lincoln, and Mercury Vehicles

1. Introduction

The OBDLink EX USB is an affordable, user-friendly, professional-grade OBD adapter specifically designed to leverage the full capabilities of the FORScan software for Windows. It is recommended by the FORScan team for its reliable connection, lightning-fast data transfer speed, and comprehensive support for proprietary Ford CAN buses. This adapter allows access to 100% of Ford ECUs and offers advanced functions often unavailable with standard diagnostic tools.

OBDLink EX features automatic electronic switching, enabling simultaneous access to HS-CAN and MS-CAN networks without the need for manual toggle switches, preventing potential errors and network interference. This ensures a rock-solid connection with no dropped packets or data corruption.

OBDLink EX USB adapter with coiled cable and USB connector
Figure 1: OBDLink EX USB Adapter
Video 1: OBDLink EX Product Overview

2. Setup Guide

Follow these steps to set up your OBDLink EX USB adapter and begin diagnostics:

  1. Download and Install the Application:
    Download the necessary diagnostic software. For Ford, Mazda, Lincoln, and Mercury vehicles, FORScan is recommended. You can find it at forscan.app. Alternatively, for general OBD-II diagnostics, you can use OBDwiz from obdwiz.app.
  2. Connect OBDLink EX to your PC:
    Plug the USB end of the OBDLink EX adapter into an available USB port on your computer. The yellow LED on the adapter will indicate that drivers are being installed automatically. If automatic installation fails, you can manually download drivers from obdlink.com/drivers.
  3. Plug OBDLink EX into the Vehicle:
    Locate your vehicle's OBD-II port, which is typically found under the driver's side dashboard. Plug the OBD-II connector of the OBDLink EX into this port. A green LED on the adapter will illuminate, indicating that the tool is ready to use.
  4. Start the Engine:
    Turn on your vehicle's engine. Ensure it is running smoothly.
  5. Launch the Application:
    Open the FORScan or OBDwiz application on your PC. Within the application, locate and click the "connect" button. Your OBDLink EX is now ready to establish communication with your vehicle.
Mechanic using a laptop with FORScan software connected to a car
Figure 2: Using FORScan with OBDLink EX

3. Operating Instructions

The OBDLink EX is designed for seamless operation with FORScan and other compatible diagnostic software. Once connected and the software is launched, you can perform various diagnostic and programming tasks.

3.1. Diagnostic Functions

  • Read & Clear Check Engine Light: Access and clear Diagnostic Trouble Codes (DTCs) to diagnose and resolve issues indicated by your vehicle's check engine light.
  • Real-time Data: Monitor live sensor data, engine parameters, and other vehicle information in real-time. This can be displayed as gauges on your PC screen.
  • Module Coverage: OBDLink EX supports all Ford protocols and modules, providing comprehensive access to your vehicle's electronic control units (ECUs).

3.2. Advanced Features with FORScan

FORScan, in conjunction with OBDLink EX, offers advanced functionalities:

  • Electronic Switching: The adapter automatically switches between HS-CAN, MS-CAN, and J1850 Ford networks. This allows FORScan to access all CAN buses simultaneously, enabling advanced functions like reading parameters from ECUs on different networks and initializing specific modules (e.g., Remote Keyless Entry and Start).
  • Bidirectional Control: Perform tests and activate components directly from the software.
  • Module Programming: Access and modify vehicle configurations, including programming new keys or updating module settings.
Diagram showing OBDLink EX automatically switching between HS-CAN and MS-CAN, with a crossed-out toggle switch
Figure 3: Automatic CAN-bus Switching

4. Maintenance

To ensure optimal performance and longevity of your OBDLink EX USB adapter:

  • Software and Firmware Updates: Regularly check for and download the latest firmware and software updates from the official OBDLink website (obdlink.com/support) or the FORScan website (forscan.org). Updates often include new features, bug fixes, and improved compatibility.
  • Storage: When not in use, store the adapter in a clean, dry place, preferably in its protective case, to prevent physical damage or exposure to extreme temperatures.
  • Cleaning: Clean the adapter with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • BatterySaver™ Technology: The adapter features BatterySaver™ Technology, allowing it to be left plugged into your vehicle without draining the battery. It automatically enters a sleep mode and wakes up when needed.

5. Troubleshooting

If you encounter issues with your OBDLink EX USB adapter, consider the following:

  • No Power/LED Indicator: Ensure the adapter is securely plugged into the vehicle's OBD-II port. Check your vehicle's fuse for the OBD-II port if no LEDs illuminate.
  • Connection Issues (Yellow LED): If the yellow LED remains on or flashes unexpectedly, it might indicate a driver issue. Reinstall drivers from obdlink.com/drivers.
  • Connection Issues (Green LED not on): If the green LED does not illuminate after plugging into the vehicle, ensure the vehicle's ignition is on or the engine is running.
  • Software Not Detecting Adapter: Verify that the correct drivers are installed and that the diagnostic software (FORScan/OBDwiz) is up to date. Ensure you have selected the correct connection type (USB) within the software settings.
  • Data Corruption/Dropped Packets: The OBDLink EX is designed for a rock-solid connection. If you experience these issues, ensure your USB cable is not damaged and try a different USB port on your PC.
  • FORScan Specific Issues: Visit FORScan.org for their extensive support resources and forums.

For further assistance, visit obdlink.com/support.

6. Specifications

FeatureDescription
Brand NameOBDLink
ModelEX USB
Item TypeCode Readers & Scan Tools
ConnectionUSB 2.0
Special FeaturesUSB, Electronic Switching (HS-CAN, MS-CAN, J1850 Ford networks)
Supported PlatformsWindows (Vista and newer), Android (via USB OTG)
Software UpdateYes
Automotive Fit TypeUniversal fit
Battery IncludedNo
Wireless SupportNo
Processor16-bit processor
Voltage Compatibility12V or 24V systems
CertificationsCE, FCC, RoHS
Maximum Throughput2,000 kbits/sec (Up to 20x faster uploads than 'toggle switch' adapters)
Graphic showing 'Maximum Throughput' with a digital speedometer indicating 2,000 kbits/sec and faster uploads
Figure 4: Maximum Throughput Capabilities

7. User Tips

  • Key Programming: Users have successfully programmed keys for Ford vehicles (e.g., 2017 Ford Explorer) using the OBDLink EX with FORScan.
  • Firmware Updates: Always use the STN firmware updater to update the adapter to the latest version for optimal performance and new features.
  • Ease of Use: The device is designed for ease of use, making diagnostics straightforward for both beginners and professionals.
  • Durability: The OBDLink EX is highly durable and built with high-quality materials for lasting performance.

8. Frequently Asked Questions (FAQ)

Q: How durable is the OBDLink EX?
A: It is highly durable and built to last, made of high-quality materials.
Q: Is the OBDLink EX easy to use?
A: Yes, it is designed for ease of use.
Q: Is it safe to use?
A: Yes, it is safe to use as it is certified by FCC and RoHS.

9. Warranty and Support

9.1. Warranty Information

The OBDLink EX USB adapter comes with a 3-year warranty. Additionally, it includes an unconditional 30-day money-back guarantee.

Image showing 'Designed in the USA' with 3-year warranty and 90-day money-back guarantee logos
Figure 5: Warranty and Design Information

9.2. Technical Support

For any assistance, technical questions, or support needs, please visit the official OBDLink support page:

obdlink.com/support

You can also refer to the user manual PDF for detailed instructions and diagrams. The PDF can be accessed via the following link: OBDLink EX User Manual (PDF)

9.3. Disposal Information

This electrical device must not be disposed of in household waste. To ensure proper disposal, please contact your public waste collection point or public authorities. The OBD adapter has WEEE approval (disposal) EC directive 2011/65/EU.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.