PROGAGA Projector Bracket

Contents

PROGAGA Universal Projector Mount Instruction Manual

Model: Projector Bracket

Brand: PROGAGA

1. Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your PROGAGA Universal Projector Mount. This versatile mount is designed to securely hold most projector models, offering flexible positioning for both ceiling and wall installations. Please read this manual thoroughly before installation and keep it for future reference.

2. Specifications

Attribute Value
Brand Name PROGAGA
Model Number Projector Bracket
Origin Mainland China
Weight (g) 1.4KG
Type Projector Mount
Material Metal (High quality carbon steel)
Cable Length 22.5cm (Note: This may refer to an integrated cable management feature or a bundled accessory cable.)
To Fit Projectors TD96 T26K T26L T26 LED96 LED86 Projector (and most models with 3 or 4 hole patterns)
Loading Capacity Safe load range 15kg, max load range 20kg
Use Length (cm) Minimum 13cm, use connecting rods 43-65cm
High-concerned chemical None

Compatibility Note: This mount is compatible with projectors that have a 3-hole or 4-hole mounting pattern, where the maximum distance between any two holes (especially diagonally) is less than 12.5 inches (32 cm).

3. Package Contents

Please verify that all components are present and in good condition before proceeding with installation.

All components of the PROGAGA projector mount laid out, including the main arm, mounting plate, screws, washers, and an Allen key.

Figure 3.1: All components included in the package.

  • Main Mount Arm (Adjustable Telescopic Boom)
  • Projector Mounting Plate (Universal Jaw with four retractable claws)
  • Ceiling/Wall Mounting Plate (Solid Plate)
  • Connecting Rods (for extended length)
  • Assorted Screws, Washers, and Anchors for installation
  • Allen Key (Hex Wrench)
  • Instruction Leaflet (This document)

4. Key Features

  • Solid Plate Construction: Made from high-quality carbon steel, ensuring enhanced bearing capacity and durability.
  • Adjustable Telescopic Boom: Allows for free expansion and fixed positioning by twisting screws, providing flexible height adjustment.
  • Rotating Joint: Features a strong, safe connection head with adjustable inclined angle and flexible design for convenient positioning.
  • Universal Jaw: Solid carbon steel refined, durable, and scientifically designed with four retractable claws to fit various projector models.
  • Versatile Mounting Options: Supports Ceiling Mounted, Vertical Hanging, and Side Hanging configurations.
  • Precision Design: Crafted with attention to detail for optimal performance and aesthetics.
Close-up of the solid plate and adjustable telescopic boom features of the projector mount.

Figure 4.1: Solid Plate and Adjustable Telescopic Boom details.

Close-up of the rotating joint and universal jaw features of the projector mount.

Figure 4.2: Rotating Joint and Universal Jaw details.

5. Setup and Installation

Before installation, ensure you have the necessary tools (screwdriver, drill, measuring tape, pencil) and that the mounting surface (ceiling or wall) can support the weight of the projector and the mount.

5.1. Video Installation Guide

Video 5.1: Visual guide for assembling and installing the projector mount.

5.2. Step-by-Step Installation

  1. Prepare the Projector: Identify the mounting screw holes on the bottom of your projector. Ensure they match the mount's compatibility (3 or 4 holes, max diagonal distance < 32 cm).
  2. Attach Projector Mounting Plate: Secure the universal jaw mounting plate to the bottom of your projector using the provided screws. Ensure the screws are tightened firmly but do not overtighten.
  3. Assemble the Main Arm: Connect the adjustable telescopic boom to the ceiling/wall mounting plate. Use the provided screws and Allen key to secure the connection.
  4. Determine Mounting Location: Choose a suitable location on your ceiling or wall, considering projection distance, screen size, and power/signal cable access. Mark the drilling points for the ceiling/wall mounting plate.
  5. Drill Holes and Install Anchors: Drill pilot holes at the marked locations. Insert appropriate wall anchors if necessary (for drywall or hollow surfaces).
  6. Mount the Ceiling/Wall Plate: Secure the ceiling/wall mounting plate to the prepared surface using the provided screws. Ensure it is level and firmly attached.
  7. Connect Projector Assembly to Main Arm: Attach the projector (with its mounting plate) to the main arm assembly. Secure it with the designated fasteners.
  8. Adjust Height and Angle: Loosen the screws on the telescopic boom to adjust the height. Use the rotating joint to adjust the tilt and roll angles as needed for optimal projection. Tighten all adjustment screws once the desired position is achieved.

5.3. Mounting Configurations and Dimensions

Diagram showing the projector mount in vertical hanging configuration with dimensions: 43cm to 65cm adjustable length, 10cm, 10.6cm, 11.1cm, 3cm, 28cm, 7.4cm.

Figure 5.2: Vertical Hanging Configuration and Dimensions.

Diagram showing the projector mount in side hanging (wall mount) configuration with dimensions: 31cm to 57.5cm adjustable length, 11.6cm.

Figure 5.3: Side Hanging (Wall Mount) Configuration and Dimensions.

Diagram showing the projector mount's base plate dimensions: 39.2cm, 26.3cm, 32.3cm, and the main body dimensions: 10cm, 10.6cm, 11.1cm.

Figure 5.4: Mounting Plate and Main Body Dimensions.

Three images showing the projector mount in Ceiling Mounted, Vertical Hanging, and Side Hanging configurations.

Figure 5.5: Various Mounting Configurations.

6. Operation and Adjustment

Once installed, the PROGAGA Universal Projector Mount allows for easy adjustments to achieve the perfect projection angle and position.

  • Height Adjustment: To adjust the vertical height, loosen the screws on the telescopic boom, extend or retract the arm to the desired length, and then securely tighten the screws.
  • Tilt and Roll Adjustment: The rotating joint allows for independent adjustment of the projector's tilt (up/down) and roll (left/right) angles. Loosen the relevant screws on the joint, position the projector as needed, and then tighten the screws to lock it in place.
  • Swivel Adjustment: The mount can be swiveled horizontally to direct the projection left or right. Loosen the appropriate joint, rotate the projector, and re-tighten.

Always ensure all screws and fasteners are securely tightened after making any adjustments to prevent accidental movement or detachment of the projector.

7. Maintenance

Regular maintenance will ensure the longevity and safe operation of your projector mount.

  • Cleaning: Wipe the mount with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
  • Check Fasteners: Periodically inspect all screws, bolts, and connections to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen. Re-tighten as necessary.
  • Inspect for Damage: Regularly check the mount for any signs of wear, corrosion, or damage. If any damage is found, discontinue use and contact customer support for assistance.

8. Troubleshooting

Problem Possible Cause Solution
Mount does not fit projector Projector mounting holes are outside the compatible range. Verify your projector's mounting hole pattern against the specifications (max diagonal distance < 32 cm). If incompatible, the mount cannot be used.
Projector is unstable or sags Fasteners are loose; projector exceeds weight capacity; mounting surface is not strong enough. Ensure all screws are securely tightened. Check projector weight against the mount's capacity (max 20kg). Reinforce the mounting surface if necessary.
Difficulty adjusting angle/height Adjustment screws are too tight or too loose. Loosen adjustment screws slightly to allow movement, then tighten once the desired position is achieved. Do not force adjustments.

9. User Tips

  • For optimal cable management, route your projector's power and signal cables neatly along the mount arm using cable ties (not included) to maintain a clean setup.
  • When installing, consider the projector's ventilation points. The mount's adjustable arms are designed to avoid blocking these, which helps prevent overheating and extends lamp life.
  • Before finalizing the mounting position, test the projection with your projector powered on to ensure the image is centered and aligned with your screen.

10. Warranty and Support

For warranty information or technical support, please refer to the PROGAGA Official Store where you purchased the product or visit the manufacturer's official website. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.