1. Introduction
This manual provides detailed instructions for the installation and use of the CAIXI 2 din Android Car Radio GPS Cable with CAN Bus Box Adapter and Power Connector, specifically designed for Nissan Qashqai J11 and X-Trail 3 models from 2019 onwards. This cable facilitates the connection of an aftermarket Android multimedia player to your vehicle's electrical system and CAN bus, ensuring proper functionality of steering wheel controls and other integrated features.
Please ensure your multimedia player uses a 16-pin connector for compatibility. Two main variants are available: the standard NISSAN-CABLE and the NISSAN-CABLE-CANBUS, which includes a CAN Bus Box for advanced vehicle integration.
2. Safety Information
- Always disconnect the vehicle's battery negative terminal before beginning any electrical installation to prevent short circuits and damage.
- If you are unsure about any part of the installation process, consult a qualified automotive electrician.
- Ensure all connections are secure and properly insulated to prevent electrical hazards.
- Do not modify the wiring harness unless explicitly instructed. Improper modifications can lead to vehicle damage or malfunction.
- Keep the product away from water and excessive heat.
3. Package Contents
Depending on the variant purchased, your package may include:
- CAIXI Power Cable Harness for Nissan (16-pin connector)
- CAN Bus Box Adapter (Model: NS-SS-04, P/N: K0090) (Included with NISSAN-CABLE-CANBUS variant)
- Vehicle-specific connectors (as shown in diagrams)


4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | CAIXI |
| Din Type | Double Din (for compatible multimedia players) |
| Item Weight | 0.2kg |
| Digital Media Format | CD (compatible with multimedia players supporting CD) |
| Display Size | 2.5" (referring to the cable's interface, not a display) |
| For Vehicle Brands/Model | Nissan (Qashqai J11, X-Trail 3, Qashqai 2019+) |
| Certification | CE |
| CAN Bus Box Model | NS-SS-04 (P/N: K0090) |
5. Installation Guide
This section outlines the general steps for installing the CAIXI power cable. Specific vehicle disassembly instructions are beyond the scope of this manual; please refer to your vehicle's service manual for removing the factory radio.
5.1 Pre-Installation Checklist
- Ensure the vehicle's battery is disconnected.
- Confirm your Android multimedia player has a compatible 16-pin power input.
- Identify the factory wiring harness in your Nissan Qashqai J11 or X-Trail 3.
5.2 Wiring Information
Detailed wiring diagrams are crucial for correct installation. While not directly embeddable here due to specific embedding constraints, please refer to the diagrams provided with your product packaging or available from the manufacturer's support resources. Key information from these diagrams includes:
16-PIN Power Socket Interface Definition (P1 Port)
This diagram typically defines the pin assignments for the multimedia player's power input. Important connections usually include:
- Pin 1: GND (Ground / Battery Negative)
- Pin 2: B+ (Constant Power / Battery Positive)
- Pin 3: ACC (Accessory Power / Key Switch)
- Pin 4: ILL (Illumination / Small Light Detection for day/night mode)
- Pin 5: BACK/Reversing control line
- Pin 6: Radio antenna power
- Pin 7 & 8: Steering wheel controls (SWC1, SWC2)
- Pins 9-16: Speaker connections (Front Left, Front Right, Rear Left, Rear Right - positive and negative for each)
Note: Always cross-reference with the specific diagram provided with your product for exact pinouts.
CAIXI Car Radio Wiring Harness Details
The CAIXI harness itself will have various colored wires, often numbered, corresponding to specific functions. A typical breakdown of these connections includes:
- Power: GND, ACC, B+BATTERY
- Vehicle Signals: Back (Reverse), +ILL (Illumination), ANT (Antenna Power)
- Steering Wheel Controls: SW1, SW2
- Speakers: FRONT L+, FRONT L-, FRONT R+, FRONT R-, REAR L+, REAR L-, REAR R+, REAR R-
Match these wires to the corresponding pins on your multimedia player's 16-pin input and your vehicle's factory harness.
5.3 Connection Steps
- Carefully remove your vehicle's factory radio according to your Nissan's service manual.
- Locate the factory wiring harness connector in your vehicle.
- Connect the vehicle-specific end of the CAIXI power cable harness to the corresponding factory connector in your Nissan. Ensure a snug fit.
- If you have the NISSAN-CABLE-CANBUS variant, connect the CAN Bus Box (NS-SS-04) to its designated connectors on the CAIXI harness.
- Connect the 16-pin connector of the CAIXI harness to the power input of your Android multimedia player.
- Connect any additional wires (e.g., GPS antenna, USB, camera inputs) from your multimedia player to their respective ports, if not integrated into the main harness.
- Before fully reassembling, temporarily reconnect the vehicle battery and test the multimedia player's basic functions (power on/off, audio, steering wheel controls if applicable).
- If all functions work correctly, disconnect the battery again, secure all wiring to prevent rattles or damage, and reassemble your vehicle's dashboard.
- Reconnect the battery.
6. Operating Instructions
Once installed, the CAIXI power cable acts as an intermediary, allowing your Android multimedia player to receive power and communicate with the vehicle's systems. Operation of the multimedia player itself will depend on its specific features and software. The CAN Bus Box, if included, ensures that vehicle data such as steering wheel controls, reverse gear detection, and illumination signals are correctly transmitted to the head unit.
- Power On/Off: The multimedia player should power on and off with the vehicle's ignition (ACC).
- Steering Wheel Controls: If your multimedia player supports it and you have the CAN Bus variant, steering wheel controls should function automatically or require configuration within the player's settings.
- Illumination: The player's backlight should dim or brighten with the vehicle's headlights (ILL signal).
- Reverse Camera: If a reverse camera is connected, the player should automatically switch to the camera view when the vehicle is put into reverse (BACK signal).
7. Care and Maintenance
The CAIXI power cable is designed for durability and requires minimal maintenance. To ensure its longevity and optimal performance:
- Avoid exposing the cables to extreme temperatures or direct sunlight for prolonged periods.
- Do not pull on the wires forcefully when connecting or disconnecting. Always grasp the connector housing.
- Ensure all connections remain secure over time. Loose connections can lead to intermittent functionality.
- Keep the wiring harness free from moisture and corrosive substances.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Multimedia player does not power on. | Loose power connection, incorrect wiring, blown fuse. | Check all 16-pin connections. Ensure B+ and ACC wires are correctly connected and receiving power. Check vehicle's fuse box for blown fuses. |
| Steering wheel controls do not work. | Incorrect CAN Bus connection, multimedia player not configured for SWC, incorrect cable variant. | Ensure you have the NISSAN-CABLE-CANBUS variant. Verify CAN Bus Box is correctly connected. Check your multimedia player's settings for steering wheel control learning/configuration. |
| No sound from speakers. | Loose speaker connections, incorrect speaker polarity. | Verify all speaker wires (FL+, FL-, FR+, FR-, RL+, RL-, RR+, RR-) are securely connected to the multimedia player and are not shorted. |
| Player does not turn off with ignition. | ACC wire not connected or incorrectly wired. | Ensure the ACC wire (Pin 3 on 16-pin connector) is correctly connected to a switched 12V source. |
9. User Tips
- Before purchasing, always double-check the pin configuration of your existing car radio and the new Android multimedia player to ensure full compatibility with the 16-pin CAIXI cable.
- For vehicles with complex electrical systems, consider taking photos of the original wiring before disconnecting anything to aid in reassembly or troubleshooting.
10. Warranty and Support
For warranty information and technical support, please contact the seller or CAIXI customer service. Keep your purchase receipt as proof of purchase.
The product is CE certified, indicating compliance with European health, safety, and environmental protection standards.