1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your new Haier Refrigerator Control Board, model 0061800014. This replacement PCB (Printed Circuit Board) is designed to restore the full functionality of compatible Haier refrigerators and freezers, addressing common issues related to power, cooling, and internal lighting.
2. Safety Information
- Always disconnect the refrigerator from the main power supply before attempting any installation, maintenance, or repair. Failure to do so can result in electric shock or serious injury.
- Only qualified personnel should attempt to replace the control board. If you are unsure about any step, consult a professional technician.
- Handle the control board with care. Avoid touching electronic components directly to prevent damage from static electricity. Use anti-static precautions if available.
- Ensure all connections are secure and correctly oriented before restoring power.
- Keep the control board dry and away from moisture.
3. Product Overview
The Haier Refrigerator Control Board 0061800014 is a critical component responsible for managing various functions of your refrigerator, including temperature control, compressor operation, fan speed, and internal lighting. This board is a direct replacement for original faulty units.

Figure 1: Top-down view of the control board with model markings.

Figure 2: Close-up of the control board's identification markings.
Video 1: Product showcase of the Haier Refrigerator Control Board.
4. Specifications
| Attribute | Detail |
|---|---|
| Type | Refrigerator Parts |
| Model Number | 0061800014 (also V98505 1D, Ver1.000, V10, CQC14134104969, V13070, CEM-1) |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 30 cm, Width: 20 cm, Height: 10 cm |
| Package Weight (approx.) | 0.3 kg |
| Known Compatible Models | Haier CFE633CWE, Haier CFE 629 CW, Haier AFL631CS, Haier CFL634CW |
Note: Compatibility may extend to other Haier models. Please verify your refrigerator's existing board model number before purchase.

Figure 3: Example of a refrigerator specification label for model verification.
5. Installation/Setup
Replacing a refrigerator control board requires careful attention to detail and adherence to safety protocols. The following steps are a general guide. Always refer to your specific refrigerator's service manual for detailed instructions.
- Disconnect Power: Unplug the refrigerator from the wall outlet to ensure there is no electrical current.
- Access the Control Board: Locate the control board compartment, typically at the back of the refrigerator or behind a top panel. You may need a screwdriver to remove access panels.
- Document Connections: Before disconnecting any wires, take clear photos or make a diagram of all wire connections to the old board. This is crucial for correct reassembly.
- Disconnect Wires: Carefully disconnect all wire harnesses and connectors from the old control board. Note their positions.
- Remove Old Board: Unscrew or unclip the old control board from its mounting.
- Install New Board: Place the new 0061800014 control board into the mounting position and secure it with screws or clips.
- Reconnect Wires: Using your photos or diagram, carefully reconnect all wire harnesses and connectors to the new board. Ensure each connection is firm and correctly seated.
- Secure Access Panel: Replace any access panels removed earlier.
- Restore Power: Plug the refrigerator back into the wall outlet.
- Test Functionality: Monitor the refrigerator for normal operation, including cooling, lighting, and compressor cycles.

Figure 4: Control board installed in a refrigerator compartment.

Figure 5: Comparison of an old and new control board.
6. Operation
Once correctly installed, the control board operates automatically as part of your refrigerator's system. There are no specific user operations for the control board itself. The refrigerator should resume its normal functions, including maintaining set temperatures and operating its various components as designed.
7. Troubleshooting
If your refrigerator does not function correctly after installing the new control board, consider the following troubleshooting steps:
- No Power/No Cooling:
- Ensure the refrigerator is securely plugged into a working power outlet.
- Check the circuit breaker for your kitchen.
- Verify all wire connections to the control board are firm and correctly seated.
- Clicking Sounds/Blinking Lights:
- These symptoms often indicate a faulty relay or power supply issue on the control board. If these persist with the new board, double-check connections.
- Ensure the board is correctly mounted and not shorting against any metal surfaces.
- Compressor Issues:
- If the compressor is not starting or running continuously, the control board might not be sending the correct signals. Verify all connections related to the compressor.
- Note that a faulty control board can sometimes lead to secondary failures in other components like the compressor.
- Incorrect Model/Compatibility:
- Ensure the model number of the installed board matches the original board or is listed as compatible with your refrigerator model.
If problems persist after these checks, it is recommended to consult a professional appliance technician.
8. Maintenance
The control board itself requires minimal maintenance. To ensure its longevity:
- Keep the area around the control board clean and free from dust and debris.
- Ensure proper ventilation around the refrigerator to prevent overheating of electronic components.
- Avoid exposing the control board to extreme temperatures or humidity.
9. User Tips
- Many users have reported successful installation and restoration of refrigerator function, often within 15 minutes.
- The product is typically well-packaged with bubble film, EPS foam, and anti-static bags to prevent damage during transit.
- This board has been confirmed to work for Haier models such as CFE633CWE, AFL631CS, CFE629CWE, and CFL634CW.
- A common symptom resolved by this board is a continuous 'Tac, Tac, Tac...' sound or delayed relay connection.
10. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact their customer service directly. Ensure you retain your purchase receipt for any warranty claims.