Hippcron Car Alarm One Button Start/Stop System Kit

Contents

Hippcron Car Alarm One Button Start/Stop System Kit

Remote Engine Door Lock Keyless Entry System Central Locking

Model: Car Alarm One Button Start/Stop System Kit

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Hippcron Car Alarm One Button Start/Stop System Kit. This system is designed to enhance your vehicle's convenience and security by providing one-button engine start/stop functionality, remote engine control, and smart locking features. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Hippcron Smart Start System kit components and packaging

Figure 1: Hippcron Smart Start System Kit Overview

2. Product Components

The Hippcron Car Alarm One Button Start/Stop System Kit includes the following items:

  • 1 x Car Engine Push Starter Host (Control Box)
  • 1 x Push Start Stop Button (with 1m Cable Length)
  • 2 x Wire Sets (0.6m / 1m lengths)
  • 1 x English User Manual
All components included in the kit: control box, wire sets, push button, and user manual

Figure 2: Contents of the Kit

3. Specifications

FeatureSpecification
Product Weight0.11 kg
Package Weight0.35 kg
Product Dimensions (L x W x H)8.70 x 8.50 x 3.00 cm (3.43 x 3.35 x 1.18 inches)
Package Dimensions (L x W x H)17 x 14 x 5 cm (6.69 x 5.51 x 1.97 inches)
Operating Voltage12V ± 2V
Operating Current<15mA
Frequency433.92MHz
Control Box ChipAS3933
Button Durability≥300,000 presses
Button MaterialSilicone, Chrome-Plating and Polishing (Rust Free)
Close-up of the engine start/stop button showing dimensions (52mm diameter, 40mm height) and features like silicone, chrome-plating, and rust-free design

Figure 3: Push Button Details

Image of the control box and a circuit board highlighting the AS3933 chip inside

Figure 4: Control Box with AS3933 Chip

4. Installation Guide

The installation of this car alarm and start/stop system requires technical expertise and familiarity with vehicle electrical systems. Professional installation is highly recommended to ensure correct wiring and prevent damage to your vehicle or the product.

4.1 General Installation Notes

  • Ensure the vehicle's battery is disconnected before beginning any wiring.
  • Refer to the detailed wiring diagram provided in the included English User Manual. This diagram is crucial for proper connection.
  • Identify and test all necessary vehicle wires (e.g., ignition, accessory, starter, brake, handbrake, door lock signals) before making permanent connections.
  • Secure all wiring to prevent shorts, chafing, or interference with moving parts.
  • Mount the control box in a secure, hidden location away from moisture and extreme heat.
  • Install the push start/stop button in an easily accessible and aesthetically pleasing location, typically replacing the original ignition keyhole.

4.2 Compatibility

This system is designed to be universal for 12V cars and can match with various vehicle types. It is compatible with existing smart keys and car alarm systems.

5. Operating Instructions

5.1 One Button Start/Stop

  • To Start the Engine: In the unlocking state, step on the foot brake for one second. Then, press the 'ENGINE START STOP' button for one second.
  • To Turn Off the Engine: With the engine running, press the 'ENGINE START STOP' button for one second.
Diagram showing a finger pressing the engine start/stop button in a car, with a foot on the brake pedal

Figure 5: One Button Start/Stop Operation

5.2 Remote Engine Start/Stop

The system supports remote engine start and stop functionality, typically operated using the vehicle's original remote keys. Refer to your vehicle's specific remote key functions and the system's wiring for details on how to activate this feature.

5.3 Smart Engine Stop

If the engine is remotely started and no further operation is detected within 10 minutes, the engine will automatically stop to conserve fuel and ensure safety.

5.4 Smart Door Lock

After a remote engine start, the car doors will automatically lock, adding an extra layer of security.

5.5 Safety Checks

  • Brake Self-Check: The engine start button will not activate the engine unless the foot brake is pressed.
  • Handbrake Self-Check: Remote engine start is disabled if the handbrake is not engaged (locked).

6. Features Overview

The Hippcron Car Alarm One Button Start/Stop System Kit offers a range of advanced features for convenience and security:

  • Universal Compatibility: Designed to work with all kinds of 12V cars.
  • Easy Installation & Detachment: Engineered for straightforward setup and removal.
  • Smart Key & Alarm System Compatibility: Seamlessly integrates with existing smart keys and car alarm systems.
  • One Button Start/Stop: Modern and convenient engine control.
  • Remote Engine Start/Stop: Start or stop your engine from a distance using your original car keys.
  • Smart Engine Stop: Automatic engine shutdown after 10 minutes of remote start without further interaction.
  • Smart Door Lock: Doors automatically lock after remote engine start for added security.
  • Brake & Handbrake Self-Checks: Integrated safety mechanisms requiring specific conditions (foot brake pressed for start, handbrake engaged for remote start).
  • Oil Pump Inspection: Intelligent system retries engine start up to 3 times in cold weather if the initial attempt fails.
  • High Temperature Protection: Built-in safeguards to protect the system from overheating.
  • Power Off Memory: Retains settings and status even after power interruption.

7. Troubleshooting

If you encounter issues with your system, please refer to the following common problems and solutions:

7.1 Remote Start Not Working

  • Check Connections: Ensure all wiring connections are secure and correctly installed according to the wiring diagram in your user manual. Loose or incorrect connections are a common cause of malfunction.
  • Verify Safety Checks: Confirm that the handbrake is engaged (locked) as required for remote start functionality.
  • Vehicle Battery: Ensure your vehicle's battery has sufficient charge.
  • System Power: Check if the control box is receiving power.
  • Consult Manual: Refer to the detailed troubleshooting section in the included English User Manual for specific diagnostic steps and error codes, if any.

7.2 Engine Not Starting with Push Button

  • Foot Brake: Ensure you are pressing the foot brake firmly when attempting to start the engine with the push button. The system's 'Brake Self-Check' feature prevents starting without it.
  • Wiring: Double-check the wiring for the push button and starter circuit.
  • Vehicle Immobilizer: If your vehicle has an immobilizer, ensure it has been properly bypassed or integrated with the system during installation.

7.3 Other Issues

For any other issues, first review your installation against the provided wiring diagram. If problems persist, it is recommended to consult with a professional car electronics installer or contact customer support.

8. Maintenance

To ensure the longevity and optimal performance of your Hippcron Car Alarm One Button Start/Stop System Kit, follow these maintenance guidelines:

  • Keep Dry: Protect the control box and wiring from moisture and water exposure.
  • Avoid Extreme Temperatures: Do not expose the system to excessively high or low temperatures.
  • Clean Gently: If necessary, clean the push button and control box with a soft, dry cloth. Avoid harsh chemicals or abrasive cleaners.
  • Inspect Connections: Periodically check all wiring connections for tightness and signs of wear or corrosion.

9. User Tips

  • This system is highly versatile and can be used for both keyless entry and remote engine start/stop functions, significantly upgrading your vehicle's convenience.
  • The system is designed for broad compatibility, making it suitable for a wide range of 12V vehicles, including models like the Kia Rio 2 (2008).
  • Always ensure the handbrake is engaged before attempting a remote start to comply with the system's safety checks.
  • If you misplace your wiring diagram, contact the seller or manufacturer for a replacement, as it is essential for correct installation and troubleshooting.
Collage of various car interiors showing the installed engine start/stop button in different vehicles

Figure 6: Examples of Installed Buttons in Various Cars

10. Frequently Asked Questions (FAQ)

Q: What can I use this item for?
A: It can be utilized for keyless entry and remote engine start/stop functions, enhancing your car's convenience and security.
Q: Is it suitable for a Kia Rio 2 2008?
A: Yes, this system is generally suitable for 12V cars, including models like the Kia Rio 2 from 2008.
Q: Does it have a lock time after turning off the car?
A: The system includes a 'Smart Engine Stop' feature that automatically stops the engine after 10 minutes if no further operation after a remote start. It also has a 'Smart Door Lock' feature that automatically locks doors after remote start.
Q: Does it come with an installation manual?
A: Yes, an English user manual, which includes a detailed wiring diagram, is provided in the package contents.
Q: The remote start doesn't work.
A: Please ensure all connections are secure, the foot brake and handbrake checks are satisfied, and refer to the detailed wiring diagram in the user manual for proper installation. If the issue persists, professional assistance may be required.

11. Warranty and Support

This Hippcron Car Alarm One Button Start/Stop System Kit comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly. Ensure you have your product model and purchase details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.