Introduction
Thank you for choosing the DownyPaws Wireless Pet Water Fountain. This innovative fountain is designed to keep your pets hydrated and healthy by providing fresh, flowing water. It features a wireless design, motion sensor activation, a large 3L capacity, and a multi-stage filtration system. Please read this manual thoroughly before use and keep it for future reference.
What's in the Box
The standard kit includes the following components:
- 1x DownyPaws Wireless Pet Water Fountain
- 1x Filter
- 1x Type-C USB Cable
- 1x Cleaning Brush
- 1x Tweezers
- 1x User Manual (English/Russian)

Image: Standard Kit Contents
Video: Unboxing and initial setup of the DownyPaws Wireless Pet Water Fountain.
Setup Instructions
- Fill the Water Tank: Fill the water tank with clean water up to the MAX line. Do not exceed the MAX line to prevent overflow.
- Install the Filter: Place the filter into the filter tray. Ensure it is seated correctly.
- Assemble the Fountain: Place the filter tray and water tray onto the water tank. Ensure all components are securely fitted.
- Insert Battery Compartment: Place the detachable battery compartment into its designated slot on the water tray.

Image: Easy to Set Up and Disassemble - Component Structure
Operating Instructions
The fountain features a single button control for various modes:

Image: Control Panel Functions
- Short Press Button: Cycle through the operating modes:
- Sensor Mode: Water flows for 15 seconds when a pet approaches (detected by the 120° thermal sensor within 3 meters). This is the default and most energy-efficient mode.
- Timed Mode: Water is released every 15 minutes for 15 seconds.
- Standard Mode: Water flows continuously. This mode requires the fountain to be connected to a power supply via the USB cable.
- Off: Turns the fountain off.
- Long Press Button: Activates the filter change reminder.
Battery and Charging
The fountain is equipped with a 4000mAh built-in lithium-ion battery, offering approximately 45 days of operation in Sensor Mode (laboratory data). The detachable battery compartment allows for convenient charging anywhere.
- Low Power Reminder: A red light on the control panel indicates low battery.
- Charging: Connect the Type-C USB cable to the battery compartment. Charging typically takes 6 hours. You can charge it using a power adapter, power bank, USB outlet, or laptop.

Image: Removable Battery Compartment and Charging Options
Automatic Shut-off
The pump automatically stops when the water level falls below the minimum mark to prevent dry running and damage to the pump. A red light indicates a lack of water. Please refill water promptly when the red light is on.

Image: Auto Shut-off Pump and Water Level Indicators
Maintenance
Cleaning the Fountain
The fountain is designed for easy cleaning with its simplified component structure. It consists of three main parts that can be disassembled for thorough cleaning.

Image: Easy to Clean - 3 Main Parts
Cleaning the Pump
Regular cleaning of the pump components is crucial to prevent blockages from impurities and ensure optimal performance.

Image: Pump Cleaning Diagram
Filter Replacement
The fountain features a quadruple filtration system (Cotton, Activated Carbon, Ion Exchange Resin, Medical Stone) to purify water. The filter needs to be cleaned or replaced when its effect decreases. The fountain has a filter replacement reminder function, activated by a long press of the settings button.

Image: Quadruple Filter System
Troubleshooting
- Fountain not dispensing water:
- Check the water level. If the red light is on, refill the water tank.
- Ensure the battery is charged. If the power status light is red, charge the battery.
- Check if the pump is clogged. Disassemble and clean the pump components as per the maintenance section.
- Verify the operating mode. Ensure it's not in 'Off' mode.
- Fountain making unusual noise:
- This could indicate a clogged pump or low water level. Refer to the above points.
- Ensure all components are correctly assembled and seated.
- Water quality seems poor:
- The filter may need cleaning or replacement. Activate the filter change reminder or replace the filter.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | DownyPaws |
| Model | DPWP9 |
| Capacity | 3L |
| Material | Food-grade PP (Plastic) / SUS304 (Stainless Steel options) |
| Power Source | USB Type-C, Lithium Battery |
| Battery Type | 4000mAh Lithium Battery |
| Charging Time | Approx. 6 hours |
| Operating Time (Sensor Mode) | Approx. 45 days |
| Fountain Size | 280mm * 160mm * 123mm |
| Noise Level | < 30dB |
| Motion Sensor | 120° Thermal Sensor, 3 meters detection range |
| Emergency Water Storage | 120ml |
| Suitable for | Cats, Small to Medium Dogs |
User Tips
- Filter Maintenance: For optimal water quality, it is recommended to clean the filter weekly and replace it every 2-4 weeks, depending on usage and the number of pets.
- Battery Longevity: To maximize battery life, primarily use the Sensor Mode. If you notice the battery life decreasing significantly over time, consider replacing the battery.
- Encourage Drinking: The fountain's design and motion-activated flow are intended to entice pets to drink more. Place it in a quiet, accessible location.
- Emergency Water: The 120ml emergency water storage is a great feature for short power outages, but always ensure the main tank is filled for continuous hydration.
Warranty and Support
The DownyPaws Wireless Pet Water Fountain comes with a 1-year warranty from the date of purchase. If you encounter any issues with the product, please contact the seller or manufacturer for support.
For product issues, please contact us within 24 hours of receipt. Returned items must be new and in their original condition for exchange or refund. Provide as much detail as possible about the problem when contacting support.