FGHGF i5 Extra/i5/I5Blink/i9/i9 EYE/i5 Young

Contents

User Manual for FGHGF Robotic Vacuum Cleaner Roller Main Brush Motor Assembly

Compatible with Midea i5, i5 Extra, i5 Blink, i9, i9 EYE, i5 Young Robotic Vacuum Cleaners

1. Warning & Safety Information

  • Do NOT disassemble the unit unless you are a qualified engineer. Unauthorized disassembly may lead to damage, electric shock, or void the warranty.
  • Keep the motor assembly away from water and excessive moisture.
  • Ensure the vacuum cleaner is powered off and unplugged from its charging base before attempting any installation or maintenance.
  • Avoid contact with sharp objects to prevent damage to the motor or wiring.

2. Product Overview

This product is a replacement roller main brush motor assembly designed for specific Midea robotic vacuum cleaner models. It is crucial for the proper functioning of the main brush, ensuring effective cleaning performance and extending the machine's service life.

2.1 Key Features

  • Direct replacement part for easy installation.
  • Restores optimal cleaning efficiency of your robotic vacuum.
  • Durable construction with metal and ABS plastic components.

2.2 Compatibility

This motor assembly is compatible with the following Midea robotic vacuum cleaner models:

  • Midea i5 Extra
  • Midea i5
  • Midea I5Blink
  • Midea i9
  • Midea i9 EYE
  • Midea i5 Young

2.3 Package Contents

  • 1x Roller Main Brush Motor Assembly

2.4 Product Views

Front view of the roller main brush motor assembly
Front view of the motor assembly
Side view of the roller main brush motor assembly
Side view of the motor assembly
Rear view of the roller main brush motor assembly
Rear view of the motor assembly

3. Installation Instructions

Follow these steps to install the roller main brush motor assembly into your Midea robotic vacuum cleaner:

  1. Power Off: Ensure your robotic vacuum cleaner is completely powered off and unplugged from its charging base.
  2. Access Brush Compartment: Turn the vacuum cleaner upside down. Locate and open the main brush compartment cover. This usually involves releasing a few latches or screws.
  3. Remove Old Motor (if applicable): Carefully disconnect any wiring connected to the old motor assembly. Note the orientation of the old motor and its connections for correct reinstallation. Gently remove the old motor assembly.
  4. Install New Motor: Align the new roller main brush motor assembly with its designated position within the vacuum cleaner. Ensure it fits securely.
  5. Connect Wiring: Reconnect the wiring to the new motor assembly. Ensure the connections are firm and correctly oriented (typically red wire to positive, black wire to negative, if marked).
  6. Secure Compartment: Close the main brush compartment cover and secure any latches or screws.
  7. Test: Place the vacuum cleaner back on its wheels, power it on, and perform a test run to ensure the main brush operates correctly.
Motor assembly with visible wiring connector
Motor assembly showing the wiring connector for installation.
Motor assembly from another angle, showing mounting points
Another view, highlighting potential mounting points.

4. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your roller main brush motor assembly.

  • Regular Cleaning: Regularly clean dust and hair from the main brush and its motor assembly. Accumulated debris can hinder performance and cause premature wear.
  • Inspection: Periodically inspect the motor assembly for any signs of wear, damage, or loose connections.
  • Avoid Sharp Objects: Ensure that the vacuum cleaner does not pick up sharp objects that could damage the main brush or the motor assembly.
  • Storage: When not in use for extended periods, store the vacuum cleaner and its components in a clean, dry environment.

5. Troubleshooting

Here are some common issues and their solutions:

Problem: The main brush is not rotating or is rotating slowly.
  • Check for tangled hair or debris around the main brush and the motor assembly. Clean thoroughly.
  • Ensure the motor assembly is securely installed and all electrical connections are firm.
  • If the motor is loose, simply re-secure it in its position.
  • If the issue persists after cleaning and re-securing, the motor may be faulty and require replacement.
Problem: Unusual noises coming from the main brush area.
  • Inspect the main brush and motor for any foreign objects or damage.
  • Ensure the main brush is correctly seated and not rubbing against other components.

6. Specifications

AttributeValue
Brand NameFGHGF
Model Numberfor midea i5 Extra/i5/I5Blink/i9/i9 EYE/i5 Young
Vacuum Part TypeMotors
MaterialMetal, ABS Plastic
OriginMainland China
TypeVacuum Cleaner Parts

7. User Tips

No specific user tips are available from buyer reviews or Q&A for this product at this time. Always refer to your robotic vacuum cleaner's main manual for general usage and maintenance advice.

8. Support and Further Information

If you encounter any quality-related issues or require further assistance, please contact the customer service of the seller.

For a detailed user manual in PDF format, you can refer to the official document: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.