1. Product Overview
The Yeelight Motion Sensor Closet Light is a versatile, dimmable, and rechargeable LED induction lamp designed for various indoor applications such as kitchens, corridors, cabinets, and wardrobes. It features smart dual sensors for light and human motion detection, offering convenient and energy-efficient lighting.
2. Setup and Installation
The Yeelight Motion Sensor Closet Light features a magnetic mounting structure for easy installation without the need for complicated wiring.
- Prepare the Surface: Ensure the desired installation surface is clean, dry, and smooth.
- Attach the Magnetic Base: The light uses a 'one stick and two suction' magnetic mounting structure. Attach the adhesive side of the magnetic base to your chosen surface.
- Mount the Light Bar: Once the magnetic base is securely attached, simply place the light bar onto the magnetic base. The light bar can be easily removed and reattached as needed, for example, for charging or temporary lighting in other areas.
Important Note: The adhesive on the magnetic base is not reusable. Tearing it off may cause damage to the adhesive surface (e.g., wall paint). Please ensure the placement is correct before final adhesion.
Video demonstrating the magnetic installation and motion sensing capabilities in different environments.
3. Operating Instructions
The Yeelight Motion Sensor Closet Light offers intelligent operation with stepless dimming and smart dual sensors.
3.1. Smart Dual Sensor Mode
- The light features both light-sensing and human-sensing intelligent dual-mode sensors.
- It intelligently recognizes day and night, activating only in dark environments to save energy.
- The motion sensor has a detection range of 120 degrees, up to 4 meters.
3.2. Constant Light Mode
- To activate constant light mode, long press the side button. This allows the light to emit light even in bright environments.
3.3. Stepless Dimming
- The light supports stepless dimming, allowing you to adjust the brightness to your preferred level.
- The color temperature range is 2700K-4000K, providing gentle warm light.
4. Maintenance and Charging
4.1. Charging
- The light supports USB-C charging. A charging cable is included.
- The red indicator light will be on when the battery is low or when the device is charging.
- The red indicator light will turn off when the battery is fully charged.
- The light bar can be easily removed from its magnetic base for convenient charging.
4.2. Battery Life
The upgraded models feature enhanced battery capacities:
- 20cm model: 1100mAh
- 40cm model: 1500mAh
- 60cm model: 2200mAh
These capacities allow for 2-5 hours of continuous use, or approximately 2-4 months of use when triggered by induction lighting 3 times a day for 20 seconds each time (based on laboratory data).
5. Troubleshooting
- Light not turning on in dark environments: Ensure the battery is charged. Check if the light is in constant light mode (long press the side button to switch back to sensor mode). Verify that the motion sensor is not obstructed.
- Light not dimming: Ensure the light is in a mode that allows dimming. If in constant light mode, try adjusting the brightness via the side button.
- Short battery life: Ensure the device is fully charged. Battery life can vary based on usage frequency and brightness settings.
6. Specifications
| Attribute | Value |
|---|---|
| Product Names | Yeelight induction cabinet light A20, A40, A60 |
| Product Models | YLCG005 (20cm), YLCG003 (40cm), YLCG001 (60cm) |
| Product Sizes | 20cm*4cm*0.9cm, 40cm*4cm*0.9cm, 60cm*4cm*0.9cm |
| Rated Power | 1.2W (20cm), 2.4W (40cm), 3.6W (60cm) |
| Battery Capacity | 1100mAh (20cm), 1500mAh (40cm), 2200mAh (60cm) |
| Battery Life | 2-5 Hours (continuous use) |
| Color Temperature | 2700K-4000K |
| Rated Input | 5V/0.5A |
| Charging Method | USB-C |
| Power Source | Battery (Other) |
| Battery Included | Yes |
| Inbox Adaptor | No |
| State of Assembly | Ready-to-Go |
| Features | Flashing, Magnetic |
| Origin | Mainland China |
7. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
8. User Tips
- Upgraded Features: Be aware that this is an upgraded version of the Yeelight cabinet light. It features stepless dimming and larger battery capacities (1100mAh for 20cm, 1500mAh for 40cm, 2200mAh for 60cm) compared to older models.
- Adhesive Caution: When installing, choose your placement carefully as the adhesive on the magnetic base is strong and generally not reusable. Removing it may damage the surface.
- Optimizing Battery Life: To maximize battery life, utilize the smart dual sensor mode which only activates the light in dark environments when motion is detected.
