1. Safety Information
Disclaimer: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
Always operate the helicopter in open areas, away from people, animals, and obstacles. Ensure the battery is fully charged before each flight. Do not operate in strong winds or adverse weather conditions. Keep fingers and loose clothing away from rotating blades.
2. Package Contents
The Fly Wing FW200 RC Helicopter package typically includes the following components:
- 1 x FW200 Helicopter
- 1 x Remote Control
- 1 x 1500mAh 11.1V Lithium Battery (built-in)
- 1 x HotRC Charger (E350 25W Compact Charger)
- 1 x Power Cord (US Plug 100-240V or EU Plug 100-240V, depending on region)
- 1 x Manual (Quick Start Guide V1.00)

Example of package contents (US Plug Blue + 1 Battery version).

The included 1500mAh 11.1V Lithium Battery.

The HotRC E350 25W Compact Charger and power cord.
3. Setup
3.1 Charging the Battery
- Connect the HotRC E350 charger to a suitable power outlet using the provided power cord.
- Connect the helicopter's 1500mAh 11.1V Lithium Battery to the charger. Ensure correct polarity.
- The charger's indicator light will show the charging status. Refer to the charger's specific instructions for details.
- Once fully charged, disconnect the battery from the charger.
3.2 Remote Control Overview
The FW200's transmitter operates at 2.4GHz. All setup is pre-configured. Do not change the transmitter's settings unless you are an experienced user, as this may prevent normal operation.

Transmitter layout and stick functions (Default US Mode 2: left throttle).
Transmitter Controls:
- Left Stick: Throttle (Up/Down), Rudder (Left/Right)
- Right Stick: Elevator (Up/Down), Aileron (Left/Right)
- Switches: Stop, Run, Hovering, Smart Acrobatic, Manual, Normal, Return
- Power Button: To turn the remote control ON/OFF.
3.3 APP Parameter Adjustment
The FW200 supports APP parameter adjustment, allowing for convenient and intuitive monitoring and configuration of helicopter settings via a mobile phone application.

The FW200 APP interface for adjusting helicopter parameters.
4. Operating Instructions
4.1 Pre-Flight Check
- Ensure the helicopter battery is fully charged.
- Ensure the remote control battery is charged.
- Check all blades and components for any damage or loose parts.
- Select an open, clear area for flight, away from people and obstacles.
4.2 Starting and Landing Procedure
- Turn the start switch of the remote control to the 'flame out' position.
- Set the mode switch to 'positioning mode'. The helicopter's green light will flash (visual positioning).
- If flying outdoors, wait for the helicopter's green light to become solid, indicating successful GPS positioning. At this point, the 'return home' function is available, and the return point is the takeoff point.
- Turn the start switch to 'ON'. The helicopter will begin to rotate at idle speed.
- Gently push the throttle stick up. The propeller will slowly accelerate until the helicopter takes off (approximately 10 seconds).
- To land, slowly lower the throttle stick. The helicopter will descend gradually.
- Once the helicopter has stably landed on the ground, toggle the 'flame out' switch to stop the motor rotation.
4.3 Flight Modes and Features
- Stable Mode: The helicopter flies stably, suitable for beginners.
- Smart Acrobatics: Sophisticated programs assist beginners with simple acrobatic flights, reducing the risk of crashing.
- Full Manual: For experienced pilots, offering full control for competitive performances and flight displays.
- Omnidirectional GPS: Provides stable flight and allows beginners to perform acrobatics more easily.
- Vision System: Utilizes new laser vision technology and a highly sensitive lower visual positioning module for stable and rapid hovering, making it easier for beginners.
- Auto Return / One Key to Home: The helicopter will automatically return and land in case of signal loss or when activated by 'one key to home'.
- Low Power Return: The helicopter will automatically descend and land when the battery is low, preventing unexpected crashes.
- Failsafe RTH: Return to Home function in case of control signal loss.

The FW200 operating in Stable Mode.

The FW200 performing Smart Acrobatics.

The FW200 in Full Manual flight mode.

The FW200 executing an Auto Return / One Key to Home function.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your FW200 RC Helicopter.
- Cleaning: After each flight, gently clean the helicopter body and blades with a soft, dry cloth to remove dust, dirt, or debris. Avoid using harsh chemicals.
- Blade Inspection: Regularly check the main and tail rotor blades for any cracks, chips, or damage. Replace damaged blades immediately.
- Component Check: Inspect the metal rotor head, main shaft, and frame for any signs of wear, bending, or looseness. Ensure all screws are tight.
- Battery Care: Store the battery in a cool, dry place. Do not overcharge or over-discharge. If not used for extended periods, charge to approximately 50% capacity.
- Motor Inspection: Check the brushless motor for any obstructions or unusual noises during operation.
- Servo Check: Verify that the sensitive metal servos respond quickly and smoothly to remote control inputs.

High precision all-metal rotor head for durability and performance.

Direct drive main shaft for efficient power transfer.

Sensitive metal servo for quick response.
6. Troubleshooting
If you encounter issues with your FW200 RC Helicopter, consider the following common troubleshooting steps:
- Helicopter not responding: Ensure both the helicopter and remote control are powered on and fully charged. Re-bind the remote control to the helicopter if necessary (refer to the Quick Start Guide for binding instructions).
- Unstable flight: Check for damaged blades or loose components. Ensure you are flying in 'Stable Mode' if you are a beginner. Calibrate the helicopter if flight characteristics have changed.
- Short flight time: Ensure the battery is fully charged. Check for any obstructions to the rotors or excessive drag that might be draining power faster.
- Helicopter crashes on low power: The FW200 has an electric quantity monitoring system that initiates an automatic landing on low power. This is a safety feature to prevent uncontrolled crashes.
- GPS not locking: Ensure you are in an open outdoor area with a clear view of the sky. Avoid flying near tall buildings or dense foliage that can obstruct GPS signals.
- APP connection issues: Ensure Bluetooth or Wi-Fi (as applicable) is enabled on your mobile device and the helicopter. Restart both the app and the helicopter.
7. Specifications

Detailed dimensions and specifications of the FW200 Helicopter.
| Attribute | Value |
|---|---|
| Brand Name | Fly Wing |
| Model | FW200 |
| Item Type | Remote Helicopter |
| Shell Material | Plastic |
| Body Material | Carbon Fiber + Aluminum Alloy |
| Control | H1-V2 Control |
| Suitable Age | 14+ Years Old |
| Flight Time | 10~20 minutes (up to 25 minutes stated in description) |
| Main Rotor Diameter (Rotor Deployed) | Approx. 445mm/17.5in |
| Tail Rotor Diameter (Rotor Deployed) | Approx. 74mm/2.9in |
| Body Size | Approx. 440x85x130mm/17.3x3.3x5.1in |
| Weight (no battery) | 287g |
| Helicopter Weight | Approx. 1150g/40.6oz (including battery) |
| Body Battery | 1500mAh 11.1V Lithium Battery (built-in) |
| Remote Control Battery | 600mAh 3.7V Lithium Battery (built-in) |
| Charging Voltage | US Plug 100-240V |
| Hovering Accuracy (GPS Normal) | Horizontal: ±1.5m/4.9ft, Vertical: ±0.5m/1.6ft |
| Control Channels | 6 channels |
| Controller Mode | MODE2 (Default US mode2 left throttle, mode1 and mode2 are adjustable) |
| Features | Auto Return, GPS, 3D, APP Control, Brushless DD, Vision System, Electric Quantity Monitoring |
8. User Tips
- Beginner-Friendly: The FW200 is designed to be easier for novice pilots to get started, thanks to its intelligent control features like stable mode and smart acrobatics.
- Utilize APP Adjustment: Take advantage of the mobile APP for convenient parameter adjustments and to monitor the helicopter's status, which is often more intuitive than relying solely on status lights.
- Outdoor and Indoor Versatility: The precision sensors, including GPS and optical flow, allow for stable flight both outdoors and indoors.
- Monitor Battery: Pay attention to the electric quantity monitoring system. The helicopter will automatically land when the battery is low, but it's always best to plan your flights and land manually before this occurs.
- Practice in Stable Mode: For new pilots, start with 'Stable Mode' to get accustomed to the controls before attempting 'Smart Acrobatics' or 'Full Manual' flight.
9. Warranty and Support
For warranty claims, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Specific warranty terms and conditions may vary by region and seller.