1. Introduction
This document provides comprehensive instructions for the installation, operation, and maintenance of the PowMr 4.2KVA/4.2KW Hybrid Solar Inverter, model POW-HVM4.2M-24V-N. This multi-function inverter/charger combines the capabilities of an inverter, solar charger, and battery charger to deliver uninterruptible power in a compact design. It features a user-friendly LCD display and accessible buttons for configuring settings such as battery charging current, AC/solar charger priority, and acceptable input voltage ranges for various applications.
The inverter supports both inverter output and bypass output modes, accommodating solar and grid charging. It allows for customizable output and charging priority settings, offering a remarkable 4200W power output and an extensive MPPT tracking range spanning 60-500V. Furthermore, it is compatible with both lithium-ion and lead-acid batteries, boasting a maximum charging current of 120A. Two built-in AC outputs significantly enhance power supply stability. Additionally, the system incorporates multiple protective features and a lithium activation function, ensuring utmost safety and stability during operation.
2. Key Features
- Pure sine wave inverter output.
- Configurable input voltage range for home appliances and personal computers via LCD setting.
- Configurable battery charging current based on applications via LCD setting.
- Configurable AC/Solar Charger priority via LCD setting.
- Compatible with mains voltage or generator power.
- Automatic restart upon AC recovery.
- Overload, over-temperature, and short circuit protection.
- Smart battery charger design for optimized battery performance.
- Cold start function.
- Suitable for both grid-tied and off-grid applications.
- Dual AC Output for enhanced stability.
- Built-in MPPT 120A charge regulator.
- Supports Lifepo4, Lithium, and Lead-acid battery types.
- Optional WiFi support for monitoring.
3. Product Overview
The PowMr Hybrid Solar Inverter is designed for robust performance and ease of use. Below are images illustrating the product and its various components.




4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your PowMr Hybrid Solar Inverter. Refer to the diagram below for a typical hybrid power system setup.

4.1. Connection Steps:
- Solar Power (PV Array) Connection: Connect your solar panels to the PV IN terminals on the inverter. Ensure the PV array MPPT voltage range is between 60VDC and 450VDC, and the maximum PV input voltage does not exceed 500VDC.
- Battery Connection: Connect your 24V battery bank (Lithium-ion or Lead-Acid) to the BATTERY terminals. Observe correct polarity (+ to + and - to -). The inverter supports a maximum charging current of 120A.
- AC Input (Utility/Generator) Connection: Connect your utility grid or a generator to the AC IN terminals. The nominal input voltage is 230Vac, with a maximum AC input voltage of 300Vac.
- AC Output (Load) Connection: Connect your home appliances to the MAIN OUT and SECOND OUT terminals. The inverter provides a single-phase 230V output with a rated output power of 4.2KW.
- Communication (COMM) Port: Use the COMM port for optional monitoring and control, such as WiFi modules (if applicable to your model).
- Grounding: Ensure the inverter is properly grounded to prevent electrical hazards.
Caution: Always ensure all power sources are disconnected before making any electrical connections. Incorrect wiring can cause damage to the inverter and connected devices, and poses a risk of electric shock.
5. Operating Instructions
The inverter offers multiple charging and output modes, which can be configured via the LCD display and buttons.
5.1. Charging Modes:
The inverter supports three battery charging modes:

- Solar Priority: Solar power is the primary source for charging batteries and powering loads. Utility/Generator power is used only when solar power is insufficient.
- Solar + Utility: Both solar power and utility/generator power are used to charge batteries and power loads simultaneously.
- Only Solar: Only solar power is used for charging and powering loads. Utility/Generator power is not used for charging.
5.2. Output Modes:
The inverter can prioritize power sources for connected loads:
- Solar Priority: Solar power is the primary source for loads. If solar power is insufficient, battery power is used. If both are insufficient, utility/generator power is used.
- Utility Priority: Utility/Generator power is the primary source for loads. If utility power is unavailable, battery power is used.
- SBU Mode (Solar-Battery-Utility): Solar power is the primary source. If solar power is insufficient, battery power is used. If both are insufficient, utility power is used.
5.3. Battery Compatibility:
The inverter is compatible with various battery types, including:

- AGM
- GEL
- FLD (Flooded)
- LI (Lithium-ion, including LiFePO4)
- SLD (Sealed Lead-Acid)
- USER (User-defined settings)
When solar energy is present, setting the battery type to LI will activate the lithium battery after 3 seconds.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
- Cleaning: Keep the inverter's exterior clean and free from dust and debris. Ensure ventilation openings are not blocked.
- Connections: Periodically check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
- Environment: Ensure the inverter is installed in a well-ventilated area, away from direct sunlight, moisture, and flammable materials.
- Battery Health: Monitor battery voltage and performance regularly, especially for lead-acid batteries, to ensure they are operating within recommended parameters.
7. Troubleshooting
If you encounter issues with your inverter, refer to the following general troubleshooting steps:
- No Power Output: Check AC input, battery connections, and PV input. Ensure the inverter is turned on.
- Error Codes: If the LCD displays an error code, consult the full product manual for specific definitions and solutions.
- Overload Protection: If the inverter shuts down due to overload, reduce the connected load and restart the unit.
- Battery Not Charging: Verify solar panel connections, AC input, and battery settings. Ensure the charging current is configured correctly.
- Unusual Noises/Smells: Immediately disconnect all power sources and contact customer support.
8. Specifications
Detailed technical specifications for the PowMr POW-HVM4.2M-24V-N Hybrid Solar Inverter.
8.1. General Specifications
- Model Number: POW-HVM4.2M-24V-N
- Rated Output Power: 4.2KW/4.2KVA
- Output Power Range: 1 - 200 KW
- Output Type: SINGLE
- Size: 300x100x400 mm
- Weight: 11.5 kg
- Is Smart Device: Yes
- Certification: CE
- Origin: Mainland China
8.2. Line Mode Specifications
| Parameter | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Input Voltage Waveform | Pure Sine Wave (Utility or Generator) | |
| Nominal Input Voltage | 230Vac | |
| Max AC Input Voltage | 300Vac | |
| Efficiency (Line Mode) | >95% (Rated R load, battery full charged) | |
| Transfer Time | 10ms typical (UPS); 20ms typical (Appliances) | |
8.3. Inverter Mode Specifications
| Parameter | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Rated Output Power | 4.2KW | 6.2KW |
| Output Voltage Waveform | Pure Sine Wave | |
| Output Voltage Regulation | 230Vac±5% | |
| Output Frequency | 50HZ | |
| Peak Efficiency | 0.93 | |
| Overload Protection | 3s@≥150% load; 5s@101%~150% load | |
| Surge Capacity | 2* rated power for 5 seconds | |
| Nominal DC Input Voltage | 24Vdc | 48Vdc |
| Cold Start Voltage | 23.0Vdc | 46.0Vdc |
| No Load Power Consumption | 30W | 50W |
8.4. Charge Mode Specifications
| Parameter | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Utility Charging Mode | ||
| Charging Algorithm | 3-Step | |
| AC Charging Current (Max) | 100A | 100A |
| MPPT Solar Charging Mode | ||
| Max. PV Array Power | 6200W | 6500W |
| Nominal PV Voltage | 240Vdc | 360Vdc |
| PV Array MPPT Voltage Range | 60Vdc~450Vdc | 90Vdc~500Vdc |
| Max. PV Array Open Circuit Voltage | 500Vdc | |
| Max Charging Current (AC charger plus solar charger) | 120A | 120A |
8.5. Grid-Tie Operation
| Parameter | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Nominal Output Voltage | 220/230/240VAC | |
| Feed-in Grid Voltage Range | 195-253VAC | |
| Feed-in Grid Frequency Range | 49-51±1Hz/59-61±1Hz | |
| Nominal Output Current | 18.2A | 26.9A |
| Maximum Conversion Efficiency (DC/AC) | 97% | |
8.6. Two Load Output Power
| Parameter | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Full Load | 4200W | 6200W |
| Maximum Main Load | 4200W | 6200W |
| Maximum Second Load (battery model) | 1400W | 2066W |
| Main Load Cut Off Voltage | 26VDC | 52VDC |
| Main Load Return Voltage | 27VDC | 54VDC |
9. Warranty and Support
9.1. Warranty Information
The PowMr POW-HVM4.2M-24V-N Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal operating conditions. Please retain your proof of purchase for warranty claims.
9.2. Customer Support
As a certified brand committed to genuine items, PowMr strives to provide excellent customer service. For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the PowMr official support channels.
Additional services include:
- Free Returns: Enjoy free returns within 15 days of delivery.
- Fast Delivery Guarantee: Receive a $1.00 coupon code if delivery is delayed. Refunds are available if the package is lost or items are damaged, or if there is no delivery within 15 days.