1. Introduction
1.1 Product Profile
The LAUNCH X431 PRO TT V5.0 is an advanced diagnostic tool that leverages LAUNCH's cutting-edge diagnostic technology. It is designed to cover a wide range of vehicles, offering powerful functions and delivering precise test results. This tool features intelligent diagnosis, local diagnosis, remote diagnosis, service functions, one-click updates, diagnostic history, feedback, vehicle coverage lookup, a toolbox, and ADAS calibration capabilities.
1.2 Components & Controls
The diagnostic system consists of two main components: the display tablet and the VCI (Vehicle Communication Interface) device.
1.2.1 Display Tablet
The tablet serves as the central processing system. It receives and analyzes live vehicle data from the VCI device and outputs the test results.
- Microphone: For audio input.
- Type-A USB Port: Connects to the VCI device for vehicle diagnosis via data cable or to compatible add-on modules (e.g., Videoscope) or USB storage devices.
- Type-C USB Port: Connects to an AC outlet for charging or to a PC for data exchange.
- POWER Key: Turns the tablet on/off. Press and hold for 8 seconds for a forced shutdown.
- LCD Screen: Displays test results and user interface.
- Speakers: For audio output.
- Rear Camera: 8.0MP camera.
1.2.2 VCI Connector (DBScar VII)
The VCI connector acts as a vehicle communication interface device. It connects to the vehicle's DLC (Data Link Connector) socket via a diagnostic cable to read vehicle data and transmit it to the tablet.
Note: Always remove the VCI connector from the vehicle's DLC after use.
- POWER indicator: Illuminates solid red when the VCI is powered up.
- VEHICLE indicator: Illuminates green and flashes when the VCI is communicating with the vehicle.
- I/O indicator: Illuminates blue when the VCI is communicating wirelessly with the tablet. Illuminates red when the VCI is connected to the tablet via USB cable.
- DB-15 diagnostic connector: Connects to the vehicle's OBD II DLC via the diagnostic cable.
1.3 Technical Parameters
| Feature | Specification |
|---|---|
| Operating System | Android 10 |
| CPU Version | 2.0GHz 4-core |
| Memory (RAM) | 4GB |
| Storage (ROM) | 64GB |
| Display Size | 8 inches capacitive touch screen |
| Display Resolution | 1280 x 800 pixels |
| Camera | Rear-facing 8.0MP |
| Connectivity | Wi-Fi (802.11a/b/g/n/ac), Bluetooth |
| Battery | 6300mAH 7.6V |
| Working Temperature | 0°C ~ 50°C |
| Storage Temperature | -20°C ~ 70°C |
| VCI Working Voltage | 9~18V |
| VCI Power Consumption | ≤2.0W |
| VCI Dimension | 118.3mm x 69.5mm x 32mm |
| VCI Relative Humidity | 20% ~ 90% |
1.4 Package List
The package typically includes the following items. Note that accessories may vary by destination.



| No. | Item | Description | Quantity |
|---|---|---|---|
| 1 | Display tablet | Main unit for displaying test results. | 1 |
| 2 | VCI connector (DBScar VII) | Device for accessing vehicle data. | 1 |
| 3 | HDB15F to HDB15F data cable | Connects to HD15M to OBD II 16 adaptor and VCI for standard OBD II diagnostic socket. Also connects to non-16pin adaptor (sold separately) and VCI for non-OBD II diagnostic socket. | 1 |
| 4 | HD15M to OBD II 16 adaptor | Connects to vehicle's OBD II diagnostic socket and the diagnostic cable. | 1 |
| 5 | Password envelope | Contains product Serial Number and Activation Code for registration. | 1 |
| 6 | Power adaptor | Charges the tablet via AC outlet. Includes 1+2 switching adaptors (UK/EU/US). | 1 |
| 7 | Type-A to Type-C data cable | Connects the tablet to AC outlet/PC for charging/data exchange. Connects the VCI connector to the tablet for vehicle diagnosis. | 1 |
| 8 | Multilingual quick start guide | Provides quick setup instructions. | 1 |
| 9 | User manual | Detailed instructions for device usage. | 1 |
| 10 | Non-16pin adaptor kit | For different vehicle diagnostic sockets, it may be necessary to use one of the non-16pin connectors included within the kit. (Optional) | 1 |
Video: Unboxing and overview of the LAUNCH X431 PRO TT V5.0 diagnostic tool and its components.
2. Setup
2.1 Initial Use
Charging & Turning On
- Use the included power adaptor to charge the tablet.
- After charging, press the POWER button to turn the tablet on. The system will initialize and enter the home screen.
Note: If the battery is completely discharged or unused for a long time, the tool may not power on immediately. Charge it for at least 5 minutes before attempting to turn it on.
Screen Layout
The bottom of the screen features five on-screen buttons:
- Home: Navigates to the Android home screen.
- Recent App: Views recently launched and running applications.
- VCI Connection: Indicates whether the VCI device is properly connected.
- Screenshot: Captures the current screen.
- Back: Returns to the previous screen.
Change System Language
The tool supports multiple system languages. To change the language:
- On the home screen, tap Settings > System > Language & input > Languages.
- Tap Add a language and choose the desired language.
- Tap and hold the desired language, then drag it to the top of the list. The system will switch to the target language.
Adjust Brightness
- On the home screen, tap Settings > Display > Brightness level.
- Drag the slider to adjust the brightness.
Note: Reducing screen brightness helps conserve battery power.
Set Standby Time
To conserve power, the screen will lock and enter sleep mode if no activity is detected within a set period.
- On the home screen, tap Settings > Display > Advanced > Sleep.
- Choose the desired sleep time.
Network Setup
The tablet has built-in Wi-Fi for internet access, enabling registration, updates, remote diagnosis, and email.
- On the home screen, tap Settings > Network & Internet > WLAN.
- Slide the Wi-Fi switch to ON. The tablet will search for available wireless networks.
- Select a network. If it's open, it will connect automatically. If encrypted, enter the password.
- When "Connected" appears, the Wi-Fi connection is complete.
Note: Disable Wi-Fi when not needed to conserve battery power.
2.2 Register & Update
New users must complete a registration process before using the tool.
- Tap the application icon on the home screen to launch it, then tap Login.
- If you are a new user, tap New Registration to enter the sign-up page.
- Fill in the required information (username, password, email, country, zip code, CAPTCHA).
- Tap Register.
- Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope).
- Tap Activate.
- Tap OK to navigate to the update center and download available software.
Note: Ensure a stable network connection before registration and updates.
2.3 Connections
Preparation
- Ensure the vehicle ignition is turned off and the battery voltage is between 9-14V.
- Locate the vehicle's DLC (Data Link Connector). For most passenger cars, it's usually within 12 inches of the instrument panel, under or around the driver's side. Refer to the vehicle's service manual if you cannot find it.

Vehicle Connection
The connection method depends on the vehicle's configuration.
OBD II Vehicle Connection
Use the included diagnostic cable (HDB15F to HDB15F data cable + HD15M to OBDII 16 adaptor) to connect the VCI to the vehicle's DLC port.

Non-OBD II Vehicle Connection
For non-OBD II vehicles, you may need to use specific adaptors from the non-16pin adaptor kit (optional).
- Select the appropriate adaptor for the vehicle's DLC port type.
- Replace the HD15M to OBDII 16 adaptor with the target adaptor.
Note: If the DLC pin is damaged or has insufficient power, you can power the VCI via the Battery Clamps Cable or Cigarette Lighter Cable (not included).
- Battery Clamps Cable: Connect one end to the power jack of the diagnostic cable and the other end to the vehicle's battery.
- Cigarette Lighter Cable: Connect one end to the power jack of the diagnostic cable and the other end to the cigarette lighter receptacle.
If performing vehicle diagnosis via data cable, connect one end of the data cable into the VCI and the other end into the USB port of the tablet.
- Turn the vehicle's ignition ON with the engine OFF.
- The tool is now ready for diagnostics.
3. Operating Instructions
3.1 Job Menu Overview
The main menu provides access to various diagnostic and service functions:
- Intelligent Diagnose: Obtains vehicle data from the cloud server for quick tests via VIN reading, avoiding manual menu selection. Also checks historical repair records online.
- Local Diagnose: Allows manual vehicle diagnosis.
- Service Function: Offers coding, reset, relearn, and other service functions to restore vehicle functionality after repairs.
- Remote Diagnose: Facilitates instant messaging and remote diagnosis for repair shops and technicians.
- TPMS: Configures the tool as a professional TPMS service tool (requires specific TSGUN device, sold separately).
- Software Update: Updates vehicle diagnostic software and APK.
- Diagnostic History: Accesses diagnostic reports from previously tested vehicles.
- Feedback: Provides a way to submit diagnostic logs for issue analysis.
- ADAS: Performs ADAS (Advanced Driver Assistance System) calibration operations (requires specific ADAS calibration tool, sold separately).
- Mall: Allows subscription to extra software or service functions.
- Vehicle Coverage: Displays all vehicle models supported by the tool.
- Info Center: Contains product information and maintenance data.
- User Info: Manages VCI, reports, password, system settings, and logout.
- Other Modules: Includes add-on modules (toolbox) and Android system apps.
3.2 Intelligent Diagnose
This function uses wireless communication between the tablet and VCI to automatically identify the vehicle's VIN. Once identified, the system retrieves information from the remote server and guides you to the vehicle information page, which lists historical diagnostic records and provides quick access to local diagnosis and other functions.
Note: Ensure the VCI is properly connected to the vehicle's DLC and a stable network connection is available.
- Tap Intelligent Diagnose on the Job menu to start pairing with the VCI.
- After pairing, the tablet reads the vehicle VIN.
- If the VIN is found, the vehicle information page appears. If not, you will be prompted to enter it manually or scan it.
VIN Recognition
If the tablet fails to access VIN information, you can:
- Tap the input field to manually enter the VIN.
- Tap the VIN recognition module icon to scan the VIN using the camera. Place the VIN inside the viewfinder rectangle. The most recognizable location is usually the top left corner of the vehicle's dashboard.
3.3 Local Diagnose
In this mode, you follow menu-driven commands and on-screen instructions.
- Tap Local Diagnose to enter the vehicle selection page.
- Select the diagnostic software version (e.g., DEMO).
- Select the vehicle model (e.g., Ford).
- Turn the ignition key to ON.
- Read vehicle information and confirm.
- Select the desired test item.
Health Report (Quick Test)
This function quickly accesses all electronic control units (ECUs) and generates a detailed vehicle health report.
- On the test item selection screen, tap Health Report.
- Turn on the ignition switch. The system will scan ECUs.
- The results will display, with fault codes in red and properly functioning systems in black.
Note: Diagnostic Trouble Codes (DTCs) indicate malfunctioning systems or components. Do not replace parts based solely on DTC definitions; follow testing procedures in the vehicle's service manual.
On-screen Buttons (Health Report)
- Freeze Frame: View a snapshot of critical parameter values when the DTC was set.
- Help: View help information for the selected DTC.
- Code Search: Search online for more information about the current DTC.
- Report: Save the current data in text format. Reports are saved in User Info > My Report > Health Reports.
- Clear DTCs: Erase existing diagnostic trouble codes. Ensure the ignition key is ON and the engine is OFF before clearing. Clearing DTCs does not fix the underlying problem.
System Scan
This option quickly scans for installed systems on the vehicle.
System Selection
This option allows manual selection of the test system and function step-by-step.
Read Data Stream
This function allows viewing and recording real-time Live Data, including current operating status for parameters and sensor information, useful for overall vehicle performance insight and repair guidance.
Caution: If driving the vehicle for troubleshooting, always have a second person operate the diagnostic tool to avoid accidents.
On-screen Buttons (Data Stream)
- Select Page: Select all items on the current page.
- Select All: Select all items. Check boxes to select specific data stream items.
- Unselect: Deselect all data stream items.
- OK: Confirm and proceed.
Display Modes
Three display modes are available for data viewing:
- Value: Default mode, displays parameters in text and list format.
- Graph: Displays parameters in waveform graphs.
- Combine: Used for graph merge status for data comparison (max 4 items simultaneously, marked in different colors).
Saving Data Stream
- Report: Save current data in text format. Reports are saved in User Info > My Report > Health Reports.
- Record: Start recording diagnostic data. Recorded live data helps troubleshoot vehicle problems. Tap again to stop recording and save.
- Save Sample: Customize and save the standard range of live data stream items as a DS sample file for comparison.
3.4 Actuation Test
This option accesses vehicle-specific subsystem and component tests. It outputs commands to the ECU to drive actuators, determining system integrity by reading ECU data or monitoring actuator operation.
3.5 Remote Diagnose
This module allows repair shops and mechanics to diagnose remote vehicles and use instant messaging for faster repairs.
Scanner-To-Scanner Remote Diagnosis
This allows initiating remote diagnosis with other compatible diagnostic tools.
- Tap Remote Diagnostic on the Job menu.
- Choose REQUEST CONTROL REMOTE DEVICE to control a partner's scanner, or INVITE REMOTE DIAGNOSE ASSISTANT to invite a technician to control your tool.
Scanner-To-PC Remote Diagnosis
You can also request remote control from a PC client technician.
- Tap Remote Diagnose. Slide the switch to ON to allow connection.
- Notify the partner to visit http://remote.x431.com.
- The partner logs in with their technician account and password.
- Tell the partner your scanner's Serial Number.
- Tap Start remote diagnosis to allow remote control.
Note: During remote diagnosis, avoid executing actions on your tablet. The partner cannot save diagnostic reports or records on your tablet.
3.6 Service (Reset) Functions
This module provides quick access to commonly performed service functions, including coding, reset, and relearn functions. Available tests vary by vehicle manufacturer, year, and model.
The tool supports 38+ maintenance services, including but not limited to:
- Oil Lamp Reset Service
- EPB Reset (Electronic Parking Brake)
- BAT Battery Service (BMS Reset)
- Diesel Particulate Filter (DPF) Regeneration
- SAS Steering Angle Sensor Reset
- ABS Bleeding
- Fuel Injector Coding
- TPMS Service
- Throttle Adaptation (Idle Relearn)
- AFS Headlamp Reset
- Sunroof Initialization
- Air Suspension Reset
- Gearbox Reset
- Gear Learning
- Tire Reset
- A/F Reset
- Adblue Reset (Diesel Engine Exhaust Gas Filter)
- Coolant Bleeding
- Language Change
- Nox Sensor Reset
- Seat Calibration
- Delete Transport Mode
- Windows Calibration
- AC System Relearn/Initialization
- EGR Reset
- Reset Fuel Trim
- High Voltage Battery Diagnostics
- GPF Regeneration
- Camshaft/Crankshaft Sensor Relearn
- Interactive Vehicle Dynamics (IVD) Initialization Sequence
- Fuel Economy Test
- Halt/Resume Transmission Adaptive Learning
- Relearn Vehicle Data
- Initialization Of Automatic Tailgate
- Initialize Power Window Regulators
- Seat Standardization
- Normalize Slide/Tilt Sunroof
- Zero-Point Calibration
- BSI Solenoid Test
- Clutch System Learn
- VGT Relearn
- Transmission Service Fast Relearn
- SWS Initialization
- VIN Registration (Write)
- Fuel Injector Balance

3.7 Toolbox (Add-on Modules)
The tool's functionality can be extended with various add-on modules (sold separately). Each module consists of hardware and an app.

- ADAS (Calibration): Calibrates camera-based & radar-based driver assistance systems (e.g., ACC, AEB, LKA, LDW, AVM). Requires specific ADAS calibration tool.
- TPMS: Configures the tablet for TPMS activation, diagnosis, sensor programming, and relearning procedures. Requires compatible TSGUN device.
- Oscilloscope: Helps diagnose faults in automotive electronic equipment and wiring by analyzing data. Requires specific Scopebox.
- S2-2 Sensorbox: Designed to quickly diagnose and simulate vehicle sensor faults. Requires compatible S2-2 Sensorbox.
- S2-2 Multimeter: Measures physical parameters like voltage, resistance, and frequency. Uses the same hardware as the S2-2 Sensorbox.
- BST360 (Battery Tester): Facilitates faster battery detection, including battery health, starting system, and charging system tests. Requires specific Bluetooth battery tester.
- Immobilizer Programmer: Performs read-write functions for vehicle keys, EEPROM, MCU, and EEPROM/FLASH of vehicle engine and gearbox ECU. Requires specific immobilizer programmer.
- Videoscope: Checks unseen parts of the engine, fuel tank, and braking system. Requires compatible Videoscope device.
- Current Clamp: Performs AC/DC current and DC voltage tests for traditional fuel cars and new energy vehicles. Requires compatible current clamp.
- Key Programmer: Performs anti-theft key matching function for immobilizer control systems.
- Insulation Tester: Measures insulation resistance, voltage, and other parameters for on-site power equipment and supply lines.
4. Maintenance
4.1 Software Update
This module allows you to update the diagnostic software, app, and frequently used software.
Update Diagnostic Software & APP
- Go to Software Update on the Job Menu and tap the Downloaded tab.
- The Available tab lists software that can be updated, categorized as:
- Common software: Includes apps associated with the diagnostic app.
- Frequently used vehicle software: Diagnostic and Reset software that is frequently used.
- Other vehicle software: Rarely used software.
- Tap Update to start downloading. Once finished, software packages will be installed automatically.
Update Frequently Used software
To update only frequently used software, go to Software Update and tap the Downloaded tab. Tap Update to start downloading.
4.2 Firmware Fix
Use this feature to upgrade and fix diagnostic firmware. Do not cut power or switch interfaces during the process.
4.3 Clear Cache
This option clears the App cache, which will restart the App.
4.4 Diagnostic Software Clear
This item allows you to hide or clear diagnostic software that is not frequently used. Removing software may completely delete it from the tablet. Use this feature to free up space if the tablet runs out of storage.
4.5 Power Saving Tips
- Turn off the screen when the tool is idle.
- Set a shorter standby time.
- Decrease screen brightness.
- Turn off WLAN connection if not required.
- Disable GPS function if not in use.
4.6 System Data Backup
The tool has two USB ports: Type-A for external USB storage and Type-C for PC connection for data backup. Type-C is recommended for PC data exchange.
A. Exchanging data with an external USB storage device:
- Plug the USB storage device into the USB Type-A interface.
- Swipe the screen from the top to select the USB drive.
- You can now exchange data.
B. Exchanging data with a PC:
- On the home screen, tap Settings > USB Management.
- Switch the USB Switch to OFF to enable the USB Type-C interface (by default, it's ON, disabling data exchange via Type-C).
- Plug the Type-C end of the included data cable into the tool's Type-C port, and the other end into the PC's USB port.
- Once the PC identifies the tool, you can perform data backup.
5. Troubleshooting (FAQ)
5.1 Communication error with vehicle ECU?
Please confirm the following:
- Is the diagnostic connector correctly connected?
- Is the ignition switch ON?
- If all checks are normal, send the vehicle year, make, model, and VIN number using the Feedback feature.
5.2 Failed to enter into vehicle ECU system?
Please confirm the following:
- Is the vehicle equipped with this system?
- Is the VCI dongle correctly connected?
- Is the ignition switch ON?
- If all checks are normal, send the vehicle year, make, model, and VIN number using the Feedback feature.
5.3 How to download the diagnostic App after resetting the tablet?
Note: Ensure the network is properly connected before registration.
After resetting the tablet:
- Launch the browser. The default official Launch website should open. (If not, type www.x431.com in the address bar).
- Tap "Login", input your username and password, and tap "Log In."
- Make sure the serial number is correct, tap "APP application program" and the Download icon to start downloading.
- After download, follow on-screen instructions to install.
- After installation, use your existing username and password to login and go to the update center to download the diagnostic software.
5.4 What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the vehicle diagnostic software in the corresponding language. If it still displays in English, it means the software for that language is under development.
5.5 How to retrieve the login password?
- Tap the application icon on the home screen to launch it.
- Tap Login on the upper right corner of the screen.
- Tap Retrieve Password.
- Input the product S/N and follow the on-screen prompts.
6. Specifications
| Category | Feature | Specification |
|---|---|---|
| Display Tablet | Operating System | Android 10 |
| CPU | 2.0GHz 4-core | |
| RAM | 4GB | |
| ROM | 64GB | |
| Display Size | 8 inches | |
| Display Resolution | 1280 x 800 | |
| Battery | 6300mAH 7.6V | |
| Camera | Rear 800W | |
| VCI Connector | Model | DBScar VII with CANFD protocols, DOIP (Optional) |
| Working Voltage | 9~18V | |
| Power Consumption | ≤2.0W | |
| Wireless Range | Up to 66FT (20m) | |
| General | Software Update | 2 Years Free Update (2026 Version) |
| Communication Interface | Bluetooth, Wifi | |
| Item Name | LAUNCH X431 PRO TT |
7. User Tips
- Users have found this device to be effective and reliable in workshop environments.
- The tool is generally well-received for meeting the needs of automotive diagnostics.
- For optimal performance, ensure the device is updated regularly.
- If you are in the EU, consider the 'Global Version' for broader compatibility outside European countries, as the EU version has IP restrictions.
- The device is compatible with X-PROG3 for immobilizer functions.
- The annual maintenance fee for updates is a consideration after the initial free update period.
- The device supports a wide range of vehicles, including Chevrolet, Fiat, and Jeep models up to 2023.
- The European version of the software includes Russian language support.
- The device features a topology map for enhanced diagnostic visualization.
- Key programming is supported through the device.
8. Warranty & Support
8.1 Warranty Information
LAUNCH® electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages. Final determination of defects will be made by LAUNCH according to stipulated procedures.
8.2 Customer Service
If you have any questions regarding the operation of the unit, please contact your local dealer or the customer service center:
- Tel: 86-755-25938674
- E-mail: DOD@cnlaunch.com
For a detailed user manual, please refer to the official PDF document: User manual (PDF)