AIMOS KC-KVM401K

Contents

KCEVE HDMI KVM Switch Box User Manual

Model: KC-KVM401K

1. Introduction

The KCEVE HDMI KVM Switch Box is designed to enhance your productivity by allowing you to control up to four computers (PCs, laptops, game consoles, etc.) from a single set of keyboard, mouse, and monitor. This device supports Ultra HD 4K@60Hz resolution and features a built-in 4-port USB 2.0 hub for sharing peripherals. Its plug-and-play design requires no drivers, making it simple to integrate into any workspace.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1x KCEVE HDMI KVM Switch Box
  • 1x HDMI 1.4 Cable (1.5m)
  • 4x USB-C to USB-A Cables (1.5m)
KVM Switch package contents and dimensions
Figure 1: Package contents and device dimensions. Note: For 4K@60Hz, additional HDMI 2.0 cables are required.

3. Specifications

BrandAIMOS
Model NumberKC-KVM401K
Input Ports4x HDMI, 4x USB 2.0 (Type-C for PC connection)
Output Ports1x HDMI, 2x USB 2.0 (for keyboard/mouse), 2x USB 2.0 (for peripherals)
Resolution SupportUp to 4K@60Hz (UHD 3840x2160@60Hz, YUV 4:4:4), also supports 3D & 1080P or lower resolutions.
HDMI StandardHDMI 2.0b (18Gbps bandwidth)
USB StandardUSB 2.0
Switching MethodsFront panel buttons, Keyboard hotkeys
Power SupplyUSB powered (no external power adapter required)
Dimensions (L x W x H)17.8 cm x 7.7 cm x 2 cm
Supported OSWindows 8.1, Windows 8, Windows 10, Windows 7, Windows Vista, Windows XP, Mac OS, Linux
Supported operating systems for KVM switch
Figure 2: The KVM switch supports various operating systems without requiring drivers.

4. Product Diagram

KCEVE HDMI KVM Switch Box front and rear view
Figure 3: Front and rear view of the KCEVE HDMI KVM Switch Box, showing all ports and controls.
KVM Switch connection diagram
Figure 4: Detailed connection diagram illustrating how to connect computers, monitor, keyboard, mouse, and other USB peripherals to the KVM switch.

5. Setup Instructions

Follow these steps to set up your KCEVE HDMI KVM Switch Box:

  1. Connect Display: Connect your monitor, TV, or projector to the OUTPUT HDMI port on the KVM switch using an HDMI cable.
  2. Connect Keyboard & Mouse: Plug your keyboard and mouse into the dedicated USB 2.0 ports (typically labeled with keyboard and mouse icons) on the KVM switch. These are usually located on the front or side panel.
  3. Connect Computers (HDMI): For each computer (PC1, PC2, PC3, PC4), connect its HDMI output to the corresponding HDMI IN port on the KVM switch (e.g., PC1's HDMI to HDMI 1, PC2's HDMI to HDMI 2, etc.).
  4. Connect Computers (USB): For each computer, connect one of the provided USB-C to USB-A cables from a USB port on your computer to the corresponding USB input port on the KVM switch (e.g., PC1's USB to USB 1, PC2's USB to USB 2, etc.). These connections provide power to the KVM switch and enable USB device sharing.
  5. Connect USB Peripherals (Optional): If you wish to share other USB devices like printers, scanners, or USB drives, connect them to the HUB 1 and HUB 2 USB 2.0 ports on the KVM switch.
  6. Power On: Ensure all connected computers and your display are powered on. The KVM switch will draw power from the connected USB cables and does not require an external power adapter.

Important Note for 4K@60Hz Display:

  • To achieve 4K@60Hz resolution, both your device's output signal and your display must support 4K@60Hz.
  • You MUST use HDMI 2.0 cables to connect the KVM switch and your display. Using HDMI 1.4 cables will not support 4K@60Hz and may result in no image.
4K@60Hz display with note on HDMI 2.0 cable requirement
Figure 5: Visual representation of 4K@60Hz display capability and the critical note regarding HDMI 2.0 cable usage.

6. Operating Instructions

Once set up, you can easily switch between your connected computers:

6.1 Switching Computers

  • Front Panel Buttons: Press the corresponding button (PC1, PC2, PC3, or PC4) on the front panel of the KVM switch to select the desired computer. The LED indicator above the button will light up to show the active computer.
  • Keyboard Hotkeys: You can use hotkey combinations on your connected keyboard to switch between computers. The KVM switch supports two hotkey sequences:
    • Press Scroll Lock twice, then press 1, 2, 3, or 4 for the respective computer.
    • Alternatively, press Ctrl twice, then press 1, 2, 3, or 4 for the respective computer.

6.2 Using the USB Hub

The KVM switch features two additional USB 2.0 HUB ports. Any device connected to these ports (e.g., printer, scanner, USB drive) will be shared among the connected computers. When you switch to a different computer, the USB peripherals will automatically switch to that active computer as well.

Desk setup showing KVM switch controlling multiple computers
Figure 6: A typical desk setup demonstrating how one keyboard and mouse can control four computers via the KVM switch.
Office environment showing printer sharing with KVM switch
Figure 7: The KVM switch allows for convenient sharing of peripherals like printers among multiple users in an office setting.

7. Maintenance

To ensure the longevity and optimal performance of your KCEVE HDMI KVM Switch Box, please follow these maintenance guidelines:

  • Keep the device in a dry, well-ventilated area, away from direct sunlight and heat sources.
  • Avoid exposing the device to extreme temperatures, humidity, or dusty environments.
  • Clean the exterior of the KVM switch with a soft, dry, lint-free cloth. Do not use liquid cleaners, solvents, or abrasive materials.
  • Ensure all cables are securely connected to prevent signal loss or intermittent functionality.
  • Do not attempt to open or repair the device yourself, as this will void the warranty.

8. Troubleshooting

If you encounter issues with your KVM switch, please refer to the following common problems and solutions:

  • No Display or Flickering Display:
    • Ensure all HDMI cables are securely connected to both the KVM switch and your devices.
    • Verify that your monitor and source devices (computers) support the desired resolution and refresh rate (e.g., 4K@60Hz).
    • For 4K@60Hz, it is crucial to use high-quality HDMI 2.0 cables. HDMI 1.4 cables will not support this resolution and may result in a blank screen or lower resolution.
    • Try connecting the source device directly to the display to rule out issues with the cables or the source itself.
    • Restart the KVM switch and all connected devices.
  • Keyboard/Mouse Not Responding:
    • Confirm that your keyboard and mouse are plugged into the dedicated USB ports on the KVM switch.
    • Check that the USB-C to USB-A cables connecting each computer to the KVM switch are properly connected and providing power/data.
    • Try a different keyboard or mouse to determine if the issue is with the peripheral itself.
    • Some specialized gaming keyboards/mice with advanced features may have compatibility issues with KVM hotkey functions. If hotkeys fail, try using the front panel buttons.
  • USB Peripherals Not Detected:
    • Ensure the peripheral is connected to one of the HUB 1 or HUB 2 USB 2.0 ports.
    • Verify that the peripheral is powered on (if it requires external power).
    • Test the peripheral by connecting it directly to a computer to confirm it is functional.
  • Hotkeys Not Working:
    • Ensure your keyboard is compatible with standard hotkey functions.
    • Try both `Scroll Lock` and `Ctrl` hotkey sequences.
    • Some operating systems or applications might interfere with hotkey detection. Try switching using the front panel buttons.

9. User Tips

Here are some tips to get the most out of your KCEVE HDMI KVM Switch Box:

  • For the best visual experience, especially at 4K@60Hz, invest in certified high-quality HDMI 2.0 cables for all connections between your computers, the KVM switch, and your monitor.
  • Consider labeling your HDMI and USB cables for each computer (e.g., "PC1 HDMI", "PC1 USB") to simplify setup and troubleshooting.
  • If using a wireless keyboard and mouse, plug their single USB receiver into the dedicated keyboard USB port on the KVM switch. This often ensures better compatibility.
  • Since the KVM switch is USB powered, ensure that the USB connections from your computers are stable and provide sufficient power. If you experience intermittent issues, try connecting to a different USB port on your computer.

10. Warranty and Support

The KCEVE HDMI KVM Switch Box comes with a one-year warranty service from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

If you encounter any problems with your device or require technical assistance, please contact the seller or manufacturer directly. They will provide support and guidance for troubleshooting or facilitate a replacement if necessary.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.