1. Introduction
The ICT TP70 series bill acceptor is a new generation money validator designed for high-security applications, offering an acceptance rate of up to 96%. It provides convenient and complete services with multiple bezel and bill box selections. This manual provides essential information for the proper installation, operation, and maintenance of your TP70 bill acceptor.
Key Features:
- Four-way bill insertion acceptance
- High acceptance rate (up to 96%)
- Multiple bezel and bill box selections
- Stacker with capacity of up to 500 bills available (depending on model)
- High security through protective mechanisms
- Fixed width/multi-width bill acceptable
- Multinational currencies acceptable (Dollar, Euro, INR, THB, and other coin types)
- Interface options: RS232, Pulse, MDB, CCNET
- New generation design of verification system
- Anti-string technology
- Lightweight and durable plastic construction
- Speedy bill transaction
- Multicolor illumination bezel design
- Easy maintenance
- Fast program update
2. Specifications
The following table details the technical specifications for the ICT TP70 bill acceptor:
Detailed Technical Specifications:
Dimensions (TP70):
While a specific diagram for TP70 is not provided, the general dimensions for the TP series are similar. For TP70/P5, refer to the bill accepted width of 62mm-70mm. The overall unit dimensions are approximately:
- Width: ~84mm (3.307 inches)
- Height: ~134mm (5.276 inches)
- Depth: ~128.4mm (5.055 inches)
3. Setup and Installation
Proper installation is crucial for the optimal performance of your ICT TP70 bill acceptor. Ensure the device is installed indoors and in an environment that meets the specified operating conditions (0℃ ~ 55℃, 30% ~ 85% RH non-condensing).
3.1 Packing List:
- Bill Acceptor (Main Unit)
- Harness (Refer to section 5-1 for application)
- TP Series Installation Guide (Physical document, if included)
- TP Series DIP Switch Setting Guide (Physical document, if included)
3.2 Harness Application:
Connect the bill acceptor using the appropriate harness based on the desired interface and voltage. The following table outlines common harness applications:
Ensure all connections are secure and correctly matched to avoid damage to the unit or connected systems. Refer to the physical TP Series Installation Guide for detailed wiring diagrams and DIP switch settings specific to your application.
4. Operating Instructions
The ICT TP70 bill acceptor is designed for straightforward operation. Once properly installed and powered, it is ready to accept bills.
4.1 Bill Insertion:
- Ensure the bill acceptor is powered on and the bezel is illuminated (if applicable).
- Insert a bill into the acceptance slot. The TP70 supports four-way bill insertion, meaning bills can be inserted in any orientation (face up/down, either end first).
- The acceptor will automatically pull the bill in for validation.
- A successful transaction typically takes approximately 3 seconds to stack the bill, or 2 seconds if no stacking is required.
- If the bill is accepted, it will be moved into the bill box. If rejected, it will be returned to the user.
4.2 Demonstration Video:
5. Maintenance
Regular maintenance ensures the longevity and consistent performance of your bill acceptor. The TP70 is designed for easy maintenance.
5.1 General Cleaning:
- Exterior Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Sensor Cleaning: Periodically clean the bill path sensors to prevent dust and debris buildup, which can affect acceptance rates. Use a soft, lint-free cloth or a cotton swab lightly dampened with isopropyl alcohol. Ensure the unit is powered off before cleaning sensors.
- Bill Path Inspection: Inspect the bill path for any obstructions or foreign objects. Carefully remove any blockages.
5.2 Bill Box Management:
- Regularly empty the bill box to prevent overfilling, which can lead to jams or damage.
- Ensure the bill box is correctly seated after emptying.
For more detailed maintenance procedures, refer to the comprehensive TP Series Installation Guide provided with your product.
6. Troubleshooting
This section provides solutions to common issues you might encounter with your ICT TP70 bill acceptor.
Common Issues and Solutions:
- Bills not accepted:
- Check if the bill is extremely dirty, wet, broken, or wrinkled. The acceptor has a 96% acceptance rate, but heavily damaged bills may be rejected.
- Ensure the bill acceptor is powered on and correctly connected.
- Clean the bill path sensors as described in the Maintenance section.
- Verify that the correct currency settings are configured via DIP switches (refer to the DIP Switch Setting Guide).
- Bill jams:
- Power off the unit immediately.
- Carefully open the bill acceptor (if accessible) and remove the jammed bill.
- Inspect for any foreign objects in the bill path.
- Ensure the bill box is not overfilled.
- No power/Unit unresponsive:
- Check the power supply connection and ensure it provides 12V DC.
- Verify that the power cable is securely connected to the unit and the power source.
If you encounter persistent issues not covered here, please consult the full TP Series Installation Guide or contact customer support.
7. User Tips
- For optimal performance, use bills that are in good condition.
- Regularly check and empty the bill box to prevent interruptions in service.
- Keep the bill acceptor's environment clean and free from excessive dust or moisture.
8. Warranty and Support
The ICT TP70 bill acceptor comes with a 1-year warranty period from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.
For technical support, warranty claims, or further assistance, please contact the seller or refer to the official documentation provided with your product. The seller is TongLe Arcade Game accessories Store.
Product Views
