Introduction
This manual provides essential information for the safe and effective use of your Powtree Ryobi 18V Lithium Battery and compatible charger. Please read these instructions carefully before initial use and retain for future reference.
Safety Information
Always observe the following safety precautions when using or handling the battery and charger:
- Do not short-circuit the battery terminals.
- Do not expose the battery to water or rain.
- Do not store the battery in direct sunlight or in environments with high temperatures.
- Keep the battery away from fire and heat sources.
- Do not attempt to open, disassemble, or modify the battery or charger.
- Dispose of batteries responsibly according to local regulations.
- Ensure the battery is fully charged before first use to optimize performance.
Figure 1: Built-in safety protections for the battery.
Figure 2: Additional safety features ensuring reliable operation.
Product Overview
The Powtree Ryobi 18V Lithium Battery is designed as a high-performance replacement or additional power source for your Ryobi ONE+ tools. It features a robust construction, precise interface for secure fitting, and an integrated LED indicator to display charge status. The compatible charger is designed for efficient and safe charging of both original and replacement batteries.
Figure 3: Powtree Ryobi 18V Lithium Battery and 12V-18V Charger.
Specifications
| Feature | Description |
|---|---|
| Battery Type | Li-ion |
| Voltage | 18V |
| Nominal Capacity | 3000mAh (various capacities available) |
| Cell Size | 18650 |
| Material | ABS + PC |
| Color | Black |
| Certification | CE |
| Warranty | 1 year |
Figure 4: Detailed battery specifications.
Figure 5: Key battery information.
Setup
Battery Installation
- Align the battery with the battery slot on your compatible Ryobi 18V tool.
- Slide the battery firmly into the tool until it clicks into place. Ensure it is securely latched.
Battery Charging
Use a compatible Ryobi 18V charger (e.g., P113, P114, P116, P117, P118, P119, P125) or the Powtree 12V-18V charger provided.
- Plug the charger into a standard power outlet.
- Align the battery with the charging slot on the charger.
- Slide the battery onto the charger until it is fully seated. The charger indicator lights will show the charging status.
Video 1: Demonstration of battery installation into a tool and charging process.
Operating Instructions
Battery LED Charge Indicator
The battery features an LED indicator to show the remaining charge. Press the button next to the LEDs to activate the display:
- 1 Bar: 0-25% charge remaining
- 2 Bars: 25-50% charge remaining
- 3 Bars: 50-75% charge remaining
- 4 Bars: 75-100% charge remaining
Charger Indicator Lights
The charger has various indicator lights to communicate status:
- Temp. Delay (Orange): Battery temperature is too high or too low for charging. Charging will begin once the temperature is within the acceptable range.
- Power On (Red): The charger is connected to power.
- Testing (Red blinking): The charger is testing the battery.
- Defective (Red): The battery is defective.
- Charging (Yellow blinking): The battery is currently charging.
- Maintenance Charge (Yellow solid): The battery is fully charged and is now in maintenance mode.
- Charged / Energy Save (Green solid): The battery is fully charged.
Figure 6: Battery charge level indicator.
Maintenance
- Keep the battery and charger clean and free from dust and debris.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- For optimal battery life, avoid completely draining the battery before recharging.
- If storing the battery for an extended period, charge it to approximately 50% capacity and recharge every 3-6 months.
Troubleshooting
- Battery not charging: Ensure the charger is properly plugged in and the battery is correctly seated. Check the charger indicator lights for 'Temp. Delay' or 'Defective' status. If 'Temp. Delay' is active, allow the battery to reach an optimal temperature. If 'Defective' is indicated, the battery may need replacement.
- Tool not powering on: Check the battery's LED indicator to ensure it has sufficient charge. Reinstall the battery firmly into the tool to ensure proper connection.
- Reduced run time: This may indicate the battery is nearing the end of its lifespan or has not been fully charged. Ensure full charges and consider replacing older batteries.
Compatibility
This Powtree 18V Lithium Battery is designed to be compatible with a wide range of Ryobi 18V ONE+ tools and chargers. Please verify your tool or charger model against the lists below.
Compatible Ryobi Battery Part Numbers:
- 130429010
- 130429032
- 130429034
- 130429035
- 130429057
- 130429063
- 130501003
- ABP-1813
- ABP-1815
- ABP1801
- ABP1802
- ABP1813
- ABP1815
- BLK18151
- BPL 18151
- BPL-1815
- BPL-18151
- BPL-1820
- BPL-1820G
- BPL1815
- BPL18151
- BPL1820
- P102
- P103
- P107
- P108
- RB18L13
- RB18L13(130429063)
- RB18L15
- RB18L25
- RB18L25(130429057)
- RB18L26
- RB18L40
Compatible Ryobi Tool Models:
- SA1802
- RWSL1801M
- RWSL-1801M
- RRS1801M
- RMT1801M
- RLT1830
- RJC181
- RJC180
- RID1801N
- RID18011L
- RID1801
- RID-1801
- RCD18022L
- RC18120-113
- RC18120
- RAD1801M
- R18T-0
- R18T
- R18SPL-0
- R18SPL
- R18SDS-0
- R18SDS
- R18R-0
- R18R
- R18PL-0
- R18PL
- R18PDBL-0
- R18PDBL
- R18PD3-0
- R18PD3
- R18N16G-0
- R18N16G
- R18MT-0
- R18MT
- R18JS-0
- R18JS
- R18IW3-113
- R18IW3-0
- R18IW3
- R18IDP
- R18IDBL-0
- R18IDBL
- R18ID3-0
- R18ID3
- R18I-0
- R18I
- R18GLU-0
- R18GLU
- R18F
- R18DD3-0
- R18DD3
- R18B-0
- R18B
- R18ALF-0
- R18ALF
- R18AG-0
- R18AG
- R10633
- R10631
- P842
- P824
- P812
- P742
- P740
- P730
- P715
- P713
- P712
- P711
- P710
- P703
- P610
- P600
- P540
- P530
- P522
- P521
- P520
- P510
- P501
- P500
- P430
- P420
- P410
- P400
- P3300
- P3200
- P310
- P301
- P300
- P2600
- P2500
- P2400
- P240
- P231
- P230
- P220
- P211
- P2100
- P210
- P206
- P204
- P203
- P201
Figure 7: Compatibility with Ryobi 18 Volt ONE+ battery models.
Figure 8: Compatibility with a range of Ryobi 18 Volt Lithium power tools.
User Tips
- Many users appreciate the clear LED charge indicator on the battery, making it easy to monitor power levels during use.
- Always double-check the compatibility list to ensure the battery works with your specific Ryobi tool model, especially for older or less common models.
- For optimal performance and longevity, ensure the battery is fully charged before starting demanding tasks.
Warranty and Support
This product comes with a 1-year warranty. For any questions, technical assistance, or warranty claims, please contact the seller directly. Provide your purchase details and a description of the issue for prompt support.
