1. Product Overview
This manual provides instructions for the weelye 2.4G Bluetooth Remote Control and Receiver accessories, designed for kids' powered ride-on cars. These replacement parts ensure safe and reliable operation of your child's electric vehicle.

1.1 Compatibility
The remote control and receiver are designed for specific children's riding toys. It is crucial to ensure that the purchased part has the same appearance and model number as the original component you are replacing. This kit includes models such as RX30 24V and RX74 24V receivers, and TX10 or TX20 remote controls.

2. Setup and Installation
2.1 Remote Control Battery Installation
To install or replace batteries in the remote control:
- Obtain two (2) AAA 1.5V batteries.
- Using a Phillips screwdriver, unscrew the screw on the back of the remote control.
- Remove the battery cover and insert the new batteries, observing correct polarity.
- Replace the battery cover and secure with the screw.
Important: Do not mix old and new batteries, or different types of batteries. Exhausted batteries should be removed from the remote control promptly.
2.2 Frequency Binding (Pairing)
For the first use, or after replacing the remote control batteries, you need to bind the remote control to the receiver:
- Long press the frequency key on the remote control for 2-4 seconds. The low-speed LED lights on the remote will flash.
- Turn on the power of the ride-on car. The low-speed LED lights on the remote will change from flashing to long lighting, indicating successful frequency binding.
- If the frequency binding fails (low-speed LED lights continue to flash), remove the battery from the remote control and repeat steps 1-3.
- If the remote control is not operated for 10 seconds, the indication light will turn off to enter power-saving mode.

3. Operating Instructions
The weelye 2.4G Bluetooth remote control provides full command over the ride-on car. Familiarize yourself with the button functions:
- Δ (Triangle): Forward movement.
- ∇ (Inverted Triangle): Backward movement.
- <| (Left Arrow): Turn left.
- ▷ (Right Arrow): Turn right.
- S (Speed): Adjusts the speed settings (typically low, medium, high).
- P (Emergency Brake): Press this button to activate the emergency brake, which will stop the car and disable the running function. Press it again to release the brake and resume normal operation.
3.1 App Control (If Applicable)
Some models may support control via a mobile application. Refer to your ride-on car's specific manual for details on app compatibility and setup. The remote control typically features 2.4G Bluetooth connectivity for stable control.
4. Maintenance
- Battery Care: Always remove exhausted batteries from the remote control promptly to prevent leakage and damage.
- Cleaning: Wipe the remote control and receiver with a dry, soft cloth. Do not use harsh chemicals or liquids.
- Storage: Store the components in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Inspection: Periodically check for any visible damage to the wiring or casing of the receiver and remote control.
5. Troubleshooting
5.1 Remote Control Not Responding
- Check Batteries: Ensure the remote control has fresh AAA 1.5V batteries installed correctly.
- Re-bind Frequency: If the remote control is still unresponsive, attempt to re-bind the frequency as described in Section 2.2.
- Power Cycle: Turn off both the car and the remote control, then turn them back on and attempt binding again.
5.2 Car Not Moving
- Emergency Brake: Check if the 'P' (emergency brake) button on the remote control is engaged. Press it to release.
- Car Power: Ensure the ride-on car itself is powered on and its battery is charged.
- Receiver Connection: Verify that the receiver is securely connected to the car's wiring harness (7-pin four-sided socket).
6. Specifications
| Feature | Specification |
|---|---|
| Brand | weelye |
| Model Numbers | RX30, RX74 (Receivers); TX10, TX20 (Remote Controls) |
| Voltage | 24V |
| Connectivity | 2.4G Bluetooth |
| Certification | FCC |
| Material | Plastic |
| Gender | Unisex |
| Recommended Age | 3-6Y, 6-12Y, 12+y, 14+y |
| Receiver Socket | 7-pin four-sided socket |
| Remote Control Battery | 2 x AAA 1.5V (not included) |
| Package Weight | 0.16 kg |
| Package Dimensions | 15 cm (L) x 12 cm (W) x 9 cm (H) |
7. User Tips
- Verify Model Number: Before purchasing or installing, always double-check the model number on your original receiver and remote control to ensure full compatibility with the replacement parts.
- Check Wiring: Ensure all wiring connections, especially the 7-pin socket, are firm and correctly seated to prevent intermittent issues.
- Test Functions: After installation and binding, test all remote control functions (forward, backward, turns, speed, emergency brake) in a safe, open area before allowing a child to use the ride-on car.
8. Warranty and Support
Specific warranty information for this product is not provided in the available documentation. For any warranty claims, technical support, or further assistance, please contact the seller directly through your purchase platform. Ensure you retain your proof of purchase for any potential claims.