Usongshine 17HS3401

Contents

Usongshine Nema17 17HS3401 Stepper Motor User Manual

Model: 17HS3401 | Brand: Usongshine

1. Introduction

This manual provides essential information for the safe and effective use of your Usongshine Nema17 17HS3401 Stepper Motor. This 4-lead Nema 17 motor is designed for precision applications such as 3D printers, CNC engraving machines, laser engraving machines, and writing machines. Please read this manual thoroughly before installation and operation.

2. Warnings & Safety Information

2.1 Fire and Burn Hazard

  • High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials.
  • The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment.
  • After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.

2.2 Mechanical Injury Hazard

  • High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries.
  • Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.

2.3 Electrical Hazard

  • High-voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet. All electrical connections must comply with local regulations and be performed by qualified electricians.

2.4 Hazardous Substances and Fumes

  • Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust. Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.

3. Specifications

The following table details the technical specifications of the Nema17 17HS3401 Stepper Motor:

FeatureSpecification
Brand NameUsongshine
Model Number17HS3401
TypeHYBRID
Phase2
Step Angle (degrees)1.8
Holding Torque34N.cm
Current / Phase1A
Cable Length1m
Plug TypeXH-2.54
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
CertificationCE
OriginMainland China
Wireless FunctionalityNo
Battery IncludedNo
High-concerned chemicalNone

Dimensions and Wiring Diagram

Refer to the diagram below for motor dimensions and electrical schematic. The motor comes with either an XH-2.54 or DuPont connector cable, typically 1 meter in length.

Technical drawing showing Nema17 stepper motor dimensions, electrical schematic, and images of XH-2.54 and DuPont connector cables.
Figure 1: Nema17 Stepper Motor Dimensions, Electrical Schematic, and Cable Types

4. Package Contents

The package typically includes:

  • 1x Usongshine Nema17 17HS3401 Stepper Motor
  • 1x 4-lead connector cable (XH-2.54 or DuPont, depending on selection)

5. Setup & Installation

5.1 Product Identification and Compatibility

This accessory is compatible with all TWOTREES-branded machines. Ensure the accessory model is compatible with your equipment.

5.2 Installation Method

This accessory must be replaced exclusively by personnel trained by the equipment manufacturer or otherwise qualified professionals, strictly following the original manufacturer's "User Manual / Maintenance Manual". Incorrect installation may result in equipment damage, performance degradation, or safety hazards.

  1. Preparation: Confirm compatibility of the accessory model. Ensure the workspace is clean and well-ventilated.
  2. Power Disconnection: Shut down the host machine and unplug it from the main power source. Wait until all components—especially the laser source and spindle motor—are fully cooled.
  3. Removal of Old Component: Refer to the original manufacturer's manual; record wiring connections and mechanical positioning, then carefully remove the component to be replaced.
  4. Installation of New Component: Install the new accessory in reverse order. Ensure all mechanical connections are securely tightened and all electrical connections are correct, properly polarized, and firmly secured.

6. Operating Procedures

6.1 Calibration

After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer's manual.

6.2 Testing

Conduct a low-power/low-speed no-load test under safe conditions to verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.

6.3 Environmental Conditions

Indoor use only. Operating Temperature: 0°C to 40°C. Storage Temperature: -10°C to 50°C. Ingress Protection Rating: IP20 (dust-protected, no water protection). Do not use in damp, dusty, corrosive-gas, or explosive environments.

6.4 Usage Restrictions

This accessory is not designed for industrial continuous-duty operation. Observe the maximum duty cycle specified in the equipment manual. Do not use this accessory for any purpose other than its intended design application.

6.5 Operation Demonstration

Watch this video for a demonstration of the stepper motor's precise rotation capabilities at different distances.

Video 1: Stepper motor rotation demonstration showing 10mm, 0.1mm, and 1mm rotation distances.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your stepper motor. Always disconnect power before performing any maintenance.

  • Cleaning: Keep the motor free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or solvents.
  • Inspection: Periodically check for loose connections, worn cables, or any signs of physical damage.
  • Lubrication: Stepper motors are generally maintenance-free regarding lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.

For detailed maintenance procedures, refer to the user manual of the equipment in which the stepper motor is installed.

8. Troubleshooting

If you encounter issues with your Nema17 17HS3401 Stepper Motor, consider the following common troubleshooting steps:

  • Motor Not Moving/Stuttering:
    • Check all wiring connections for proper seating and polarity.
    • Verify that the power supply voltage and current are sufficient for the motor's specifications.
    • Ensure the motor driver is correctly configured and receiving appropriate step/direction signals.
    • Check for mechanical obstructions or excessive load on the motor shaft.
  • Overheating:
    • Ensure the motor is not overloaded.
    • Verify that the motor driver current settings are appropriate.
    • Ensure adequate ventilation around the motor.
  • Excessive Noise/Vibration:
    • Check for loose mounting screws.
    • Ensure the motor shaft is properly aligned with the driven component.
    • Verify that the motor driver microstepping settings are correctly configured.

If the problem persists, consult the manual of your main equipment or contact technical support.

9. User Tips

  • Compatibility Check: Before purchasing or installing, verify that this Nema17 motor is compatible with your specific 3D printer or CNC machine, especially for extruder applications. Some users have found it to be a suitable replacement for Artillery Genius Pro extruders, but always confirm specifications.
  • Wiring: Pay close attention to the wiring diagram provided. Incorrect wiring can damage the motor or the control board.
  • Driver Settings: Proper configuration of your stepper motor driver (current, microstepping) is crucial for optimal performance and to prevent overheating.

10. Warranty & Support

For warranty information and technical support, please contact the seller or manufacturer directly. Keep your purchase records for any claims.

Manufacturer Information:

  • Brand: TWOTREES (as per compatible equipment) / Usongshine (motor brand)
  • Manufacturer Name: Shenzhen Two Trees Technology Co., Ltd.
  • Address: 402, Building 11, No. 9, Qilin Road, Nankeng Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province

EU Responsible Person Information:

  • Name: AMZ ECREP SL
  • Address: Calle Gran Via 49, 7 Deb. Spain

11. Disclaimer

By using this product, the user acknowledges and agrees to the following terms:

  1. The manufacturer and seller shall not be liable for any direct or indirect damages resulting from:
    1. Failure to operate, maintain, or store the device in accordance with this manual and all accompanying safety guidelines.
    2. Unauthorized modification of the device, or use of non-OEM or incompatible accessories or software.
    3. Use of the device outside its intended purpose, or processing of prohibited or unknown materials.
    4. Installation, commissioning, or repair performed by personnel not authorized or trained by the manufacturer.
    5. Damage caused by force majeure or unforeseen events such as fire, flood, lightning strike, or abnormal voltage.
    6. Normal wear and tear (e.g., natural power decay of the laser module over time).
  2. California Proposition 65 Warning:

    ⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

© 2024 Usongshine. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.