TEYUN A4/A6/A8 Series

Contents

TEYUN A4/A6/A8 Professional Portable Mixer User Manual

Model: A4/A6/A8 Series | Brand: TEYUN

1. Introduction

The TEYUN A4/A6/A8 Professional Portable Mixer is a versatile audio device combining the functionalities of an analog mixer and a digital sound card. It is designed for a wide range of applications including computer sound mixing, live broadcasting, recording, and karaoke. Featuring high-resolution audio processing, built-in DSP effects, and multiple connectivity options, this mixer provides a comprehensive solution for audio enthusiasts and professionals.

Key Features:

  • Combined analog mixer and digital sound card functionality.
  • Available in 4, 6, or 8 channel configurations (A4, A6, A8 models).
  • Multiple microphone (6) and line (2) inputs.
  • High-resolution 24-bit/48kHz sampling rate for recording and playback.
  • Built-in high-speed ARM chip for advanced audio processing (low noise, sound/pitch change, reverberation, delay, electro-acoustic effects).
  • Multiple input/output interfaces for flexible recording methods.
  • Highly available power input mode and switchable 48V phantom power.
  • High-quality equalizer and high-pass filter.
  • Optional multiple record groups and dual monitor modes.
  • Flexible LOOPBACK function ideal for recording and network broadcasting.
  • Built-in Bluetooth 5.0 chip for wireless connectivity.

Video: TEYUN A8 Professional Mixer Overview

2. Setup

2.1 Unpacking

Carefully remove the mixer from its packaging. Ensure all components are present: the mixer unit, power adapter, and any included cables. Inspect the unit for any signs of damage during transit.

2.2 Connections

The TEYUN mixer offers wide equipment compatibility. Refer to the diagrams below for typical connection methods.

Connection method diagram for TEYUN A8 mixer showing various inputs and outputs.

Figure 2.1: Connection Method Diagram

Diagram illustrating wide equipment compatibility of the TEYUN mixer with microphones, guitars, electronic organs, CDs, power amplifiers, USB, Bluetooth, mobile devices, and headsets.

Figure 2.2: Wide Equipment Compatibility

Input Connections:

  • Microphones: Connect dynamic microphones, 48V condenser microphones (ensure +48V phantom power is enabled if required), or 3V condenser microphones to the MIC/LINE inputs.
  • Instruments: Electric guitars and electronic organs can be connected to appropriate line inputs.
  • Audio Devices: Connect CD players or other audio sources to the 2RCA or 2LINE inputs.
  • Digital Sources: Use the USB port for computer connection or U disk playback. Bluetooth allows wireless connection from mobile phones/computers/tablets.
  • Mobile Devices: Dedicated mobile live broadcast ports and 3.5mm audio input are available for smartphones.

Output Connections:

  • Main Output: Connect to a power amplifier or recording device via the MAIN OUT (L/R) ports.
  • Headphones: Connect headphones to the PHONES 3.5mm MINI output for monitoring.
  • Mobile Live Output: Use the 3.5mm MINI mobile phone live output for streaming.

Power Connection:

Connect the mixer to a power supply using the provided adapter. The mixer can also be powered via USB from a computer.

2.3 Powering On/Off

After all connections are secure, press the power button to turn on the mixer. To power off, press the power button again and disconnect the power supply.

3. Operating Instructions

3.1 Controls Overview

Familiarize yourself with the mixer's control panel. The image below labels the key controls and ports.

Detailed diagram of TEYUN A8 mixer controls, labeling inputs, gain, EQ, effects, volumes, and digital display.

Figure 3.1: Mixer Controls and Ports

  • MIC/LINE Inputs: Connect microphones or line-level devices.
  • +48V Power Switch: Activates phantom power for condenser microphones on channels 3-4.
  • Gain Adjustment: Adjusts the input sensitivity for each channel.
  • Treble, Midrange, Bass Adjustment: Equalizer controls for high, mid, and low frequencies on each channel.
  • Shunt Effect Switch: Activates channel effects.
  • Distortion Indicator: Lights up if the input signal is too high.
  • Volume Adjustment of Each Channel: Controls the individual volume of each input channel.
  • Main Volume: Controls the overall output volume.
  • Effect Switch: Activates global effects.
  • DSP Selection Key: Selects from 24 built-in DSP effects.
  • Function Switcher: Toggles between different modes (e.g., PC, USB, Bluetooth).
  • Digital Signal Volume: Adjusts the volume of digital inputs.
  • Effect Volume Adjustment: Controls the intensity of the selected effect.
  • Return: Adjusts the return level of effects.
  • Mobile Live Broadcast Port: Dedicated port for mobile streaming.
  • Monitor Jack: Headphone output for monitoring.
  • Monitor Volume Adjustment: Controls headphone volume.
  • Stereo Input: RCA inputs for stereo audio sources.
  • PC/USB Switch: Selects between PC audio or USB drive playback.
  • U Disk Socket: For connecting USB storage devices.

3.2 Basic Operation

Mixing Audio:

  1. Connect your audio sources (microphones, instruments, etc.) to the appropriate input channels.
  2. Adjust the Gain for each channel to achieve a healthy input level without clipping (monitor the distortion indicator).
  3. Use the Treble, Midrange, and Bass knobs to shape the tone of each channel.
  4. Adjust the individual Volume Adjustment of Each Channel to create your desired mix.
  5. Control the overall output level with the Main Volume knob.

Using DSP Effects:

The mixer features 24 DSP microphone effects. Use the DSP Selection Key to cycle through the available effects. Adjust the Effect Volume Adjustment to control the wet/dry mix of the effect.

Bluetooth Connectivity:

Activate Bluetooth mode using the Function Switcher. Pair your mobile device or computer with the mixer (look for 'TEYUN Mixer' or similar in your device's Bluetooth settings). Once connected, you can stream audio wirelessly to the mixer.

Image showing a built-in 5.0 Bluetooth chip with a barrier-free range of 8-10 meters.

Figure 3.2: Built-in Bluetooth 5.0 Chip

Recording and Live Broadcasting:

The mixer's flexible LOOPBACK function allows for internal recording, integrating the mixer and sound card for easy recording or webcasting. Connect to your computer via USB or use the dedicated mobile live broadcast port for streaming from a smartphone. For analog audio port live streaming, ensure you use a four-pole 3.5mm audio cable.

Diagram illustrating analog audio port for live streaming and the LOOPBACK function for internal recording and webcasting.

Figure 3.3: LOOPBACK Function and Analog Audio Port

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the mixer's surface. Avoid using liquid cleaners or solvents, as they may damage the finish or internal components.
  • Storage: Store the mixer in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Handling: Avoid dropping or subjecting the mixer to strong impacts.
  • Cable Management: Ensure cables are not kinked or strained, which can lead to damage over time.

5. Troubleshooting

  • No Sound Output:
    • Check all cable connections to ensure they are secure.
    • Verify that the main volume and individual channel volumes are turned up.
    • Ensure the correct input source is selected (e.g., PC, USB, Bluetooth).
    • Check if any MUTE buttons are active.
  • Distorted Sound:
    • Reduce the input gain for the affected channel.
    • Lower the main volume.
    • Check for damaged cables.
    • If the PeakLED lights up frequently, the signal is too hot; reduce gain.
  • Phantom Power Not Working:
    • Ensure the +48V power switch is engaged.
    • Verify that your condenser microphone requires 48V phantom power.
  • Bluetooth Connection Issues:
    • Ensure the mixer is in Bluetooth mode.
    • Check that Bluetooth is enabled on your device and it's within the 8-10 meter range.
    • Try unpairing and re-pairing the device.

6. Specifications

FeatureSpecification
Frequency ResponseInput STEREO OUT 0.5dB/-1.0dB (20Hz~20kHz), test rated output level @1kHz, GAIN knob: Medium
Distortion0.02%@+10dBu (20Hz~20kHz)
Residual Noise-85dBu
Channel Crosstalk(1Hz)-83dB
InputMIC*6, 2RCA, PC, 2LINE. USB, BT, 3.5MINI
OutputSTEREO OUT:2, PHONES:3.5MINI Headphone output: 1, 3.5MINI mobile phone live output
BusStereO:1
Input Channel Function80Hz, 12dB/ Octave EQ high gain: +15dB/-15dB
Treble 10kHz, midrange 2.5kHz, bass 100Hz
PeakLED: When the signal after EQ reaches 3dB below the distortion, the LED lights up
Level IndicationMAIN STEREO LEVEL knob. Green light at 0dB, red light for clipping (signal 0dB below distortion).
Input and Output LevelMIC(-60dB) LNE ONPUT(-40dB)
Dimensions (A8)286mm (W) x 280mm (D) x 54mm (H, 25mm at front)
Diagram showing the dimensions of the TEYUN A8 mixer: 286mm width, 280mm depth, 54mm height at back, 25mm height at front.

Figure 6.1: TEYUN A8 Mixer Dimensions

7. User Tips

  • Power Supply: The mixer can be powered via its dedicated power adapter or a computer's USB port. Ensure the power source meets the mixer's voltage requirements.
  • Channel Management: While the mixer offers multiple inputs, understand that the output is typically a stereo mix. For multi-track recording, ensure your recording software is configured to capture the stereo output from the mixer's digital sound card.
  • Streaming Setup: For live streaming, utilize the dedicated mobile live broadcast port or connect to your computer via USB. Experiment with the LOOPBACK function for seamless integration of your mixer's output into your streaming software.
  • Effect Customization: Don't hesitate to experiment with the 24 DSP effects and their volume adjustments to find the perfect sound for your vocals or instruments.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.