Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the DATEIYOU DT-228 Car Relay 3-Way Fuse Box. This unit is designed to safely manage electrical circuits in 12V and 24V automotive systems, featuring 40A and 80A relays and fuses, ideal for applications such as controlling spot lights and other vehicle accessories.
Product Overview
The DT-228 Car Relay Fuse Box is a compact and robust solution for organizing and protecting your vehicle's electrical circuits. It includes three relay slots and three fuse slots, along with necessary metal fasteners for secure installation.


The product is available in various configurations:
- 4PIN Relays: Normally open configuration.
- 5PIN Relays: Normally open & Normally closed configuration.
The default shipment includes a 3-way box with 3 relays, 3 fuses, and metal fasteners. Please verify your specific requirements before purchase.
Setup and Installation
Before beginning installation, ensure the vehicle's battery is disconnected to prevent electrical shorts or injury.
Components Included:

The package typically includes:
- 1x Fuse Box Housing
- 1x Fuse Box Cover
- 3x Relays (12V or 24V, 40A or 80A, 4PIN or 5PIN depending on selection)
- 3x Fuses (various amperages)
- Metal Terminals/Fasteners
Installation Steps:
- Prepare the Mounting Location: Choose a dry, secure location in your vehicle, away from excessive heat or moisture. The fuse box has mounting tabs for secure attachment.
- Open the Fuse Box: Gently unclip the cover from the fuse box housing.
- Insert Terminals: Insert the appropriate metal terminals into the designated slots from the underside of the fuse box. Ensure they are securely locked in place.
- Wire Connections: Connect your vehicle's electrical wires to the terminals according to your circuit diagram. Ensure correct polarity and secure connections. Refer to a professional if unsure about wiring.
- Install Relays and Fuses: Once wiring is complete, firmly insert the relays and fuses into their respective slots. Match relay pin configurations (4PIN or 5PIN) and fuse amperages to your circuit requirements.
- Close the Cover: Snap the fuse box cover back into place, ensuring it is fully sealed.
- Reconnect Battery: Reconnect the vehicle's battery and test the circuits.

Operation
The DATEIYOU DT-228 Car Relay Fuse Box operates passively as a central control and protection unit for your automotive electrical systems. Once correctly installed and wired, the relays will switch power to connected accessories based on control signals, and the fuses will protect the circuits from overcurrents.
- Relay Function: Relays act as electrically operated switches, allowing a low-current control signal to switch a high-current circuit. This is essential for components like spot lights, horns, or fuel pumps.
- Fuse Function: Fuses are safety devices that melt and break an electrical circuit if the current exceeds a safe level, preventing damage to wiring and components.
Ensure that the voltage (12V or 24V) and current ratings (40A or 80A) of the relays and fuses match the requirements of your vehicle's electrical system and the accessories being powered.
Maintenance
Regular maintenance ensures the longevity and reliable operation of your fuse box:
- Periodic Inspection: Annually inspect the fuse box for any signs of corrosion, loose connections, or physical damage.
- Fuse Replacement: If a circuit stops working, check the corresponding fuse. If it's blown (broken filament), replace it with a new fuse of the exact same amperage rating. Never use a fuse with a higher rating, as this can lead to wiring damage or fire.
- Relay Check: If a circuit controlled by a relay fails, and the fuse is intact, the relay might be faulty. Relays can be tested using a multimeter or by temporarily swapping with a known good relay of the same type.
- Cleaning: Keep the fuse box and its surroundings clean and free from dust, dirt, and moisture. Use a dry cloth for cleaning.
Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Accessory not turning on | Blown fuse, faulty relay, loose wiring, no power to control signal. | Check and replace fuse. Test or replace relay. Inspect all wiring connections. Verify control signal. |
| Fuse blows repeatedly | Short circuit in the accessory or wiring, excessive current draw. | Inspect wiring for shorts. Check the accessory for faults. Ensure the accessory's current draw does not exceed the fuse rating. |
| Relay clicks but accessory doesn't activate | Faulty relay contacts, poor connection to accessory, accessory fault. | Test or replace relay. Check power and ground connections to the accessory. Test the accessory directly. |
If you are unable to resolve an issue, consult a qualified automotive electrician.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | DATEIYOU |
| Model Number | DT-228 |
| Theory | Voltage relay |
| Use | AUTO |
| Voltage | 12V / 24V (selectable) |
| Current Range | 40A / 80A (selectable) |
| Contact Load | High Power |
| Protect Feature | Sealed |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Certification | CE |
| Origin | Mainland China |
| Dimensions (Approx.) | 84mm (Length) x 69mm (Width) x 80mm (Height) (Note: Image labels indicate 'cm', but 'mm' is assumed for typical automotive component sizing.) |
User Tips
- Confirm Specifications: The product is available in various configurations (e.g., 4PIN vs. 5PIN relays, 40A vs. 80A current ratings). Always confirm the exact specifications you require before purchasing to ensure compatibility with your application.
- Wiring Harness: This product link typically provides the fuse box with relays and fuses, but without a pre-wired harness. If you require a pre-wired solution, please contact the seller for options.
Warranty and Support
For any product-related inquiries, technical assistance, or warranty claims, please contact the seller directly. Ensure you have your purchase details readily available.
The product is certified with CE, indicating compliance with European safety standards.