1. Introduction
The UGREEN CM523 is a versatile 2-in-1 Bluetooth 5.1 audio adapter designed to seamlessly integrate Bluetooth functionality into your existing audio systems. It operates as both a transmitter (TX) and a receiver (RX), allowing you to either send audio from non-Bluetooth devices to Bluetooth headphones/speakers or receive audio from Bluetooth-enabled devices on non-Bluetooth speakers/car stereos. With stable signal transmission and a compact design, it enhances your audio experience without the need for complex installations.

Figure 1: UGREEN Bluetooth 5.1 2-in-1 Audio Transmitter & Receiver
Video 1: Product demonstration of the UGREEN Bluetooth 5.1 Transmitter Receiver in various use cases.
2. Package Contents
Please check the package for the following items:
- 1 x UGREEN Bluetooth Audio Transceiver (CM523)
- 1 x 1m 3.5mm Audio Cable
- 1 x User Manual

Figure 2: Illustration of the product and its included accessories.
3. Product Overview
Familiarize yourself with the components of your UGREEN Bluetooth adapter:

Figure 3: Product diagram showing USB-A power supply, Indicator, Mode switch (TX/RX), Mic (Phone call only), Multifunction button, and 3.5mm audio jack.
- USB-A Power Supply: Connects to a USB port for power.
- Indicator Light: Displays the device's status (pairing, connected, etc.).
- Mode Switch (TX/RX): Toggles between Transmitter and Receiver modes.
- Mic (Phone call only): Integrated microphone for hands-free calling in RX mode.
- Multifunction Button: Used for various functions like pairing, reconnection, and factory reset.
- 3.5mm Audio Jack: Connects to audio input/output devices using the included 3.5mm audio cable.
4. Setup and Connection
The UGREEN Bluetooth adapter is plug-and-play, requiring no driver installation. Both the 3.5mm audio jack and the USB-A port must be connected for operation.
4.1. Transmitter (TX) Mode Setup
Use TX mode to send audio from a non-Bluetooth device (e.g., TV, PC, MP3 player) to Bluetooth headphones or speakers.
- Switch to TX Mode: Slide the mode switch on the adapter to the 'TX' position.
- Connect to Audio Source: Plug the 3.5mm audio cable into the adapter's 3.5mm jack and the other end into the audio output port of your non-Bluetooth device (e.g., TV, PC).
- Power On: Plug the USB-A connector of the adapter into a USB power source (e.g., TV's USB port, PC's USB port, or a 5V/1A USB charger). The indicator light will show its status.
- Pairing: Turn on your Bluetooth receiving device (e.g., headphones, speaker) and put it into pairing mode. The adapter will automatically search and connect to it.
- Enjoy Audio: Once paired, audio from your source device will be transmitted to your Bluetooth headphones/speakers.

Figure 4: Steps for setting up and using the adapter in Transmitter (TX) Mode.

Figure 5: Example of using the adapter in TX mode to connect a TV or PC to Bluetooth headphones/speakers.
4.2. Receiver (RX) Mode Setup
Use RX mode to receive audio from a Bluetooth-enabled device (e.g., smartphone, tablet, laptop) on a non-Bluetooth audio system (e.g., wired speakers, car stereo, amplifier).
- Switch to RX Mode: Slide the mode switch on the adapter to the 'RX' position.
- Connect to Audio System: Plug the 3.5mm audio cable into the adapter's 3.5mm jack and the other end into the audio input port of your non-Bluetooth audio system (e.g., AUX-in in a car, input on wired speakers).
- Power On: Plug the USB-A connector of the adapter into a USB power source (e.g., car's USB port, USB charger). The indicator light will show its status.
- Pairing: On your Bluetooth-enabled device (e.g., phone), enable Bluetooth, search for "UGREEN-60300" in the list of available devices, and select it to connect.
- Enjoy Audio: Once paired, audio from your Bluetooth device will play through your connected audio system.

Figure 6: Steps for setting up and using the adapter in Receiver (RX) Mode.

Figure 7: Example of using the adapter in RX mode to connect a phone, tablet, or laptop to wired speakers, an amplifier, or a car radio.
5. Operating Instructions
5.1. General Bluetooth Connection Steps

Figure 8: Detailed steps for Bluetooth connection in both RX and TX modes.
- Mode Switch: Toggle the side button to select either RX (Receiver) or TX (Transmitter) mode.
- Connect: Ensure both the 3.5mm audio cable and the USB-A power supply are connected to their respective devices.
- RX Mode Pairing: Enable Bluetooth on your phone/tablet, search for "UGREEN-60300", and tap to connect.
- TX Mode Pairing: Turn on your Bluetooth receiving devices (earphones/speakers) to enter pairing mode. The adapter will automatically connect.
- Bluetooth Connected:
- RX mode: Your device will play music from your phone.
- TX mode: The indicator light will show a slow blue blinking (1 time/10 seconds).
5.2. One-to-Two Pairing (RX Mode Only)
In Receiver (RX) mode, the adapter supports connecting two Bluetooth devices (e.g., two phones or laptops) simultaneously. This allows for easy switching between audio sources without re-pairing.

Figure 9: Two users sharing a Bluetooth speaker connected to two phones via the adapter in RX mode.
Note: Transmitter (TX) mode does not support connecting two earphones simultaneously.
5.3. LED Indicator Light Status
The indicator light provides visual feedback on the adapter's current status:
| Status | Indicator |
|---|---|
| Plug Into The USB Device | Blue Light Blinks for 1 Second |
| Pairing | Red and Blue Lights Blink Alternately |
| Pairing Succeeded | Slow Blue Blinking (1 Time/10 Seconds) |

Figure 10: Table detailing the LED indicator light behavior for different device statuses.
6. Maintenance
To ensure the longevity and optimal performance of your UGREEN Bluetooth adapter, please follow these guidelines:
- Keep the device dry and away from moisture.
- Avoid extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
7. Troubleshooting
If you encounter issues with pairing or the indicator light, consider the following solutions:
- No Power/Light Not On:
- Check if the USB power supply is functioning correctly.
- Ensure the power source provides DC5±0.25V, ≥200mA (a 5V/1A power supply is recommended).
- Try a different USB port or power adapter.
- Unable to Pair:
- Verify that the mode switch is in the correct position (TX for transmitting, RX for receiving).
- Ensure your target Bluetooth device (in TX mode) or source device (in RX mode) is in pairing mode.
- Confirm that the 3.5mm audio cable is securely connected to both the adapter and the audio device.
- Force Pairing: The adapter has a force pairing function. Refer to the detailed instructions in the manual for specific button presses if needed.
- Factory Reset: To restore factory settings, press the multifunction button 5 times in a row while the device is powered on. This can resolve persistent pairing issues.
- Poor Audio Quality or Disconnections:
- Ensure the transmission distance is within 10 meters and there are no significant obstacles.
- Minimize interference from other wireless devices.
- Check if the audio source or receiving device is functioning correctly.
8. Product Specifications
| Attribute | Value |
|---|---|
| Brand Name | UGREEN |
| Model No. | CM523 (60300) |
| Product Name | Bluetooth Receiver & Transmitter |
| Special Features | Bluetooth Receive & Transmit |
| Working Mode | Receive mode (RX) & Transmit mode (TX) |
| Bluetooth Version | Bluetooth 5.1 |
| Bluetooth Protocol (RX) | A2DP |
| Bluetooth Protocol (TX) | A2DP, AVRCP, HSP, HFP |
| Audio Encoding Technology | SBC |
| Operating Frequency | 2.400GHz-2.4835GHz |
| Transmission Distance | 10m (No Blocking) |
| SNR (TX) | ≥80dB |
| SNR (RX) | ≥90dB |
| Response Frequency | 20-20KHz |
| Audio Sample Rate | Supports up to 16bit/44.1kHz |
| Power Supply Requirements | USB-A interface power supply, specification: DC5±0.25V, ≥200mA |
| Driver Installation | Plug & Play |
| Power On/Off Operation | Plug in and power on / Unplug and power off |
| Certifications | CE, FCC, SRRC, IC, TELEC, BQB |
| Dimensions (approx.) | 48mm (L) x 19mm (W) x 8.5mm (H) |
| Net Weight (approx.) | 8.5g |

Figure 11: Diagram showing the approximate dimensions of the UGREEN Bluetooth adapter.
9. User Tips
- For optimal audio quality and stable connection, ensure the adapter is powered by a stable 5V/1A USB power source.
- Remember that RX (Receiver) and TX (Transmitter) modes cannot operate simultaneously. Always switch to the desired mode before connecting.
- In RX mode, you can connect two Bluetooth devices (e.g., two smartphones) to the adapter simultaneously, allowing you to switch between audio sources easily.
- TX mode does not support connecting to two Bluetooth headphones/earphones at the same time.
- The built-in microphone is only active in RX mode for hands-free calling.
10. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt for warranty claims.